Hi! > > On Mon 2017-02-20 15:56:36, Sakari Ailus wrote: > > > On Mon, Feb 20, 2017 at 03:09:13PM +0200, Sakari Ailus wrote: > > > > I've tested ACPI, will test DT soon... > > > > > > DT case works, too (Nokia N9). > > > > Hmm. Good to know. Now to figure out how to get N900 case to work... > > > > AFAICT N9 has CSI2, not CSI1 support, right? Some of the core changes > > seem to be in, so I'll need to figure out which, and will still need > > omap3isp modifications... > > Indeed, I've only tested for CSI-2 as I have no functional CSI-1 devices. > > It's essentially the functionality in the four patches. The data-lane and > clock-name properties have been renamed as data-lanes and clock-lanes (i.e. > plural) to match the property documentation.
Yes, it seems to work.
Here's a patch. It has checkpatch issues, I can fix them. More
support is needed on the ispcsiphy.c side... Could you take (fixed)
version of this to your fwnode branch?
Thanks,
Pavel
---
omap3isp: add support for CSI1 bus
Signed-off-by: Pavel Machek <pa...@ucw.cz>
diff --git a/drivers/media/platform/omap3isp/isp.c
b/drivers/media/platform/omap3isp/isp.c
index 245225a..4b10cfe 100644
--- a/drivers/media/platform/omap3isp/isp.c
+++ b/drivers/media/platform/omap3isp/isp.c
@@ -2032,6 +2034,7 @@ static int isp_fwnode_parse(struct device *dev, struct
fwnode_handle *fwn,
struct v4l2_fwnode_endpoint vfwn;
unsigned int i;
int ret;
+ int csi1 = 0;
ret = v4l2_fwnode_endpoint_parse(fwn, &vfwn);
if (ret)
@@ -2059,38 +2062,82 @@ static int isp_fwnode_parse(struct device *dev, struct
fwnode_handle *fwn,
case ISP_OF_PHY_CSIPHY1:
case ISP_OF_PHY_CSIPHY2:
- /* FIXME: always assume CSI-2 for now. */
+ switch (vfwn.bus_type) {
+ case V4L2_MBUS_CSI2:
+ dev_dbg(dev, "csi2 configuration\n");
+ csi1 = 0;
+ break;
+ case V4L2_MBUS_CCP2:
+ case V4L2_MBUS_CSI1:
+ dev_dbg(dev, "csi1 configuration\n");
+ csi1 = 1;
+ break;
+ default:
+ dev_err(dev, "unkonwn bus type\n");
+ }
+
switch (vfwn.base.port) {
case ISP_OF_PHY_CSIPHY1:
- buscfg->interface = ISP_INTERFACE_CSI2C_PHY1;
+ if (csi1)
+ buscfg->interface = ISP_INTERFACE_CCP2B_PHY1;
+ else
+ buscfg->interface = ISP_INTERFACE_CSI2C_PHY1;
break;
case ISP_OF_PHY_CSIPHY2:
- buscfg->interface = ISP_INTERFACE_CSI2A_PHY2;
+ if (csi1)
+ buscfg->interface = ISP_INTERFACE_CCP2B_PHY2;
+ else
+ buscfg->interface = ISP_INTERFACE_CSI2A_PHY2;
break;
+ default:
+ dev_err(dev, "bad port\n");
}
- buscfg->bus.csi2.lanecfg.clk.pos =
vfwn.bus.mipi_csi2.clock_lane;
- buscfg->bus.csi2.lanecfg.clk.pol =
- vfwn.bus.mipi_csi2.lane_polarities[0];
- dev_dbg(dev, "clock lane polarity %u, pos %u\n",
- buscfg->bus.csi2.lanecfg.clk.pol,
- buscfg->bus.csi2.lanecfg.clk.pos);
-
- for (i = 0; i < ISP_CSIPHY2_NUM_DATA_LANES; i++) {
- buscfg->bus.csi2.lanecfg.data[i].pos =
- vfwn.bus.mipi_csi2.data_lanes[i];
- buscfg->bus.csi2.lanecfg.data[i].pol =
- vfwn.bus.mipi_csi2.lane_polarities[i + 1];
+ if (csi1) {
+ buscfg->bus.ccp2.lanecfg.clk.pos =
vfwn.bus.mipi_csi1.clock_lane;
+ buscfg->bus.ccp2.lanecfg.clk.pol =
+ vfwn.bus.mipi_csi1.lane_polarity[0];
+ dev_dbg(dev, "clock lane polarity %u, pos %u\n",
+ buscfg->bus.ccp2.lanecfg.clk.pol,
+ buscfg->bus.ccp2.lanecfg.clk.pos);
+
+ buscfg->bus.ccp2.lanecfg.data[0].pos = 1;
+ buscfg->bus.ccp2.lanecfg.data[0].pol = 0;
+
dev_dbg(dev, "data lane %u polarity %u, pos %u\n", i,
- buscfg->bus.csi2.lanecfg.data[i].pol,
- buscfg->bus.csi2.lanecfg.data[i].pos);
+ buscfg->bus.ccp2.lanecfg.data[0].pol,
+ buscfg->bus.ccp2.lanecfg.data[0].pos);
+
+ buscfg->bus.ccp2.strobe_clk_pol =
vfwn.bus.mipi_csi1.clock_inv;
+ buscfg->bus.ccp2.phy_layer = vfwn.bus.mipi_csi1.strobe;
+ buscfg->bus.ccp2.ccp2_mode = vfwn.bus_type ==
V4L2_MBUS_CCP2;
+ buscfg->bus.ccp2.vp_clk_pol = 1;
+
+ buscfg->bus.ccp2.crc = 1;
+ } else {
+ buscfg->bus.csi2.lanecfg.clk.pos =
vfwn.bus.mipi_csi2.clock_lane;
+ buscfg->bus.csi2.lanecfg.clk.pol =
+ vfwn.bus.mipi_csi2.lane_polarities[0];
+ dev_dbg(dev, "clock lane polarity %u, pos %u\n",
+ buscfg->bus.csi2.lanecfg.clk.pol,
+ buscfg->bus.csi2.lanecfg.clk.pos);
+
+ for (i = 0; i < ISP_CSIPHY2_NUM_DATA_LANES; i++) {
+ buscfg->bus.csi2.lanecfg.data[i].pos =
+ vfwn.bus.mipi_csi2.data_lanes[i];
+ buscfg->bus.csi2.lanecfg.data[i].pol =
+ vfwn.bus.mipi_csi2.lane_polarities[i +
1];
+ dev_dbg(dev, "data lane %u polarity %u, pos
%u\n", i,
+ buscfg->bus.csi2.lanecfg.data[i].pol,
+ buscfg->bus.csi2.lanecfg.data[i].pos);
+ }
+ /*
+ * FIXME: now we assume the CRC is always there.
+ * Implement a way to obtain this information from the
+ * sensor. Frame descriptors, perhaps?
+ */
+
+ buscfg->bus.csi2.crc = 1;
}
-
- /*
- * FIXME: now we assume the CRC is always there.
- * Implement a way to obtain this information from the
- * sensor. Frame descriptors, perhaps?
- */
- buscfg->bus.csi2.crc = 1;
break;
default:
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
signature.asc
Description: Digital signature
