Hi!

I guess I'll need some help here.

> @@ -160,6 +163,33 @@ static int ccp2_if_enable(struct isp_ccp2_device *ccp2, 
> u8 enable)
>                       return ret;
>       }
>  
> +     if (isp->revision == ISP_REVISION_2_0) {
> +             struct media_pad *pad;
> +             struct v4l2_subdev *sensor;
> +             const struct isp_ccp2_cfg *buscfg;
> +             u32 csirxfe;
> +
> +             pad = media_entity_remote_pad(&ccp2->pads[CCP2_PAD_SINK]);
> +             sensor = media_entity_to_v4l2_subdev(pad->entity);
> +             /* Struct isp_bus_cfg has union inside */
> +             buscfg = &((struct isp_bus_cfg *)sensor->host_priv)->bus.ccp2;
> +
> +
> +             if (enable) {
> +                     csirxfe = OMAP343X_CONTROL_CSIRXFE_PWRDNZ |
> +                               OMAP343X_CONTROL_CSIRXFE_RESET;
> +
> +                     if (buscfg->phy_layer)
> +                             csirxfe |= OMAP343X_CONTROL_CSIRXFE_SELFORM;
> +
> +                     if (buscfg->strobe_clk_pol)
> +                             csirxfe |= OMAP343X_CONTROL_CSIRXFE_CSIB_INV;
> +             } else
> +                     csirxfe = 0;
> +
> +             regmap_write(isp->syscon, isp->syscon_offset, csirxfe);
> +     }
> +

This is ugly. This does not belong here, it is basically duplicate of

. But that function is not called, because ccp2->phy is not
initialized for ISP_REVISION_2_0 in ..._ccp2_init():

int omap3isp_ccp2_init(struct isp_device *isp)
{
        if (isp->revision == ISP_REVISION_2_0) {
                ccp2->vdds_csib = devm_regulator_get(isp->dev, "vdds_csib");
                if (IS_ERR(ccp2->vdds_csib)) {
                        if (PTR_ERR(ccp2->vdds_csib) == -EPROBE_DEFER)
                                return -EPROBE_DEFER;
                        dev_dbg(isp->dev,
                                "Could not get regulator vdds_csib\n");
                        ccp2->vdds_csib = NULL;
                }
        } else if (isp->revision == ISP_REVISION_15_0) {
                ccp2->phy = &isp->isp_csiphy1;
        }


...phy is only initialized for REVISION_15 case. (and isp_csiphy1
seems to contain uninitialized data at this point. Below is a fix for
that).

If someone has an idea what to do there, please help. I tried
ccp2->phy = &isp->isp_csiphy2; but that does not have pipe
initialized, so it eventually leads to crash.

Thanks,
                                                                Pavel


diff --git a/drivers/media/platform/omap3isp/ispcsiphy.c 
b/drivers/media/platform/omap3isp/ispcsiphy.c
index 8f73f6d..a2474b6 100644
--- a/drivers/media/platform/omap3isp/ispcsiphy.c
+++ b/drivers/media/platform/omap3isp/ispcsiphy.c
@@ -362,14 +374,16 @@ int omap3isp_csiphy_init(struct isp_device *isp)
        phy2->phy_regs = OMAP3_ISP_IOMEM_CSIPHY2;
        mutex_init(&phy2->mutex);
 
-       if (isp->revision == ISP_REVISION_15_0) {
-               phy1->isp = isp;
-               phy1->csi2 = &isp->isp_csi2c;
-               phy1->num_data_lanes = ISP_CSIPHY1_NUM_DATA_LANES;
-               phy1->cfg_regs = OMAP3_ISP_IOMEM_CSI2C_REGS1;
-               phy1->phy_regs = OMAP3_ISP_IOMEM_CSIPHY1;
-               mutex_init(&phy1->mutex);
+       if (isp->revision != ISP_REVISION_15_0) {
+               memset(phy1, sizeof(*phy1), 0);
+               return 0;
        }
 
+       phy1->isp = isp;
+       phy1->csi2 = &isp->isp_csi2c;
+       phy1->num_data_lanes = ISP_CSIPHY1_NUM_DATA_LANES;
+       phy1->cfg_regs = OMAP3_ISP_IOMEM_CSI2C_REGS1;
+       phy1->phy_regs = OMAP3_ISP_IOMEM_CSIPHY1;
+       mutex_init(&phy1->mutex);
        return 0;
 }



-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) 
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

Attachment: signature.asc
Description: Digital signature

Reply via email to