Hi Kevin,
On Tue, Nov 22, 2016 at 07:52:43AM -0800, Kevin Hilman wrote:
> Allow getting of subdevs from DT ports and endpoints.
>
> The _get_pdata() function was larely inspired by (i.e. stolen from)
vpif_capture_get_pdata and "largely"?
> am437x-vpfe.c
>
> Signed-off-by: Kevin Hilman <khil...@baylibre.com>
> ---
> drivers/media/platform/davinci/vpif_capture.c | 130
> +++++++++++++++++++++++++-
> include/media/davinci/vpif_types.h | 9 +-
> 2 files changed, 133 insertions(+), 6 deletions(-)
>
> diff --git a/drivers/media/platform/davinci/vpif_capture.c
> b/drivers/media/platform/davinci/vpif_capture.c
> index 94ee6cf03f02..47a4699157e7 100644
> --- a/drivers/media/platform/davinci/vpif_capture.c
> +++ b/drivers/media/platform/davinci/vpif_capture.c
> @@ -26,6 +26,8 @@
> #include <linux/slab.h>
>
> #include <media/v4l2-ioctl.h>
> +#include <media/v4l2-of.h>
> +#include <media/i2c/tvp514x.h>
Do you need this header?
>
> #include "vpif.h"
> #include "vpif_capture.h"
> @@ -650,6 +652,10 @@ static int vpif_input_to_subdev(
>
> vpif_dbg(2, debug, "vpif_input_to_subdev\n");
>
> + if (!chan_cfg)
> + return -1;
> + if (input_index >= chan_cfg->input_count)
> + return -1;
> subdev_name = chan_cfg->inputs[input_index].subdev_name;
> if (subdev_name == NULL)
> return -1;
> @@ -657,7 +663,7 @@ static int vpif_input_to_subdev(
> /* loop through the sub device list to get the sub device info */
> for (i = 0; i < vpif_cfg->subdev_count; i++) {
> subdev_info = &vpif_cfg->subdev_info[i];
> - if (!strcmp(subdev_info->name, subdev_name))
> + if (subdev_info && !strcmp(subdev_info->name, subdev_name))
> return i;
> }
> return -1;
> @@ -1327,6 +1333,21 @@ static int vpif_async_bound(struct v4l2_async_notifier
> *notifier,
> {
> int i;
>
> + for (i = 0; i < vpif_obj.config->asd_sizes[0]; i++) {
> + struct v4l2_async_subdev *_asd = vpif_obj.config->asd[i];
> + const struct device_node *node = _asd->match.of.node;
> +
> + if (node == subdev->of_node) {
> + vpif_obj.sd[i] = subdev;
> + vpif_obj.config->chan_config->inputs[i].subdev_name =
> + (char *)subdev->of_node->full_name;
> + vpif_dbg(2, debug,
> + "%s: setting input %d subdev_name = %s\n",
> + __func__, i, subdev->of_node->full_name);
> + return 0;
> + }
> + }
> +
> for (i = 0; i < vpif_obj.config->subdev_count; i++)
> if (!strcmp(vpif_obj.config->subdev_info[i].name,
> subdev->name)) {
> @@ -1422,6 +1443,110 @@ static int vpif_async_complete(struct
> v4l2_async_notifier *notifier)
> return vpif_probe_complete();
> }
>
> +static struct vpif_capture_config *
> +vpif_capture_get_pdata(struct platform_device *pdev)
> +{
> + struct device_node *endpoint = NULL;
> + struct v4l2_of_endpoint bus_cfg;
> + struct vpif_capture_config *pdata;
> + struct vpif_subdev_info *sdinfo;
> + struct vpif_capture_chan_config *chan;
> + unsigned int i;
> +
> + dev_dbg(&pdev->dev, "vpif_get_pdata\n");
> +
> + if (!IS_ENABLED(CONFIG_OF) || !pdev->dev.of_node)
> + return pdev->dev.platform_data;
> +
> + pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
> + if (!pdata)
> + return NULL;
> + pdata->subdev_info =
> + devm_kzalloc(&pdev->dev, sizeof(*pdata->subdev_info) *
> + VPIF_CAPTURE_MAX_CHANNELS, GFP_KERNEL);
> +
> + if (!pdata->subdev_info)
> + return NULL;
> + dev_dbg(&pdev->dev, "%s\n", __func__);
> +
> + for (i = 0; ; i++) {
> + struct device_node *rem;
> + unsigned int flags;
> + int err;
> +
> + endpoint = of_graph_get_next_endpoint(pdev->dev.of_node,
> + endpoint);
> + if (!endpoint)
> + break;
> +
> + sdinfo = &pdata->subdev_info[i];
subdev_info[] has got VPIF_CAPTURE_MAX_CHANNELS entries only.
> + chan = &pdata->chan_config[i];
> + chan->inputs = devm_kzalloc(&pdev->dev,
> + sizeof(*chan->inputs) *
> + VPIF_DISPLAY_MAX_CHANNELS,
> + GFP_KERNEL);
> +
> + chan->input_count++;
> + chan->inputs[i].input.type = V4L2_INPUT_TYPE_CAMERA;
I wonder what's the purpose of using index i on this array as well.
If you use that to access a corresponding entry in a different array, I'd
just create a struct that contains the port configuration and the async
sub-device. The omap3isp driver does that, for instance; see
isp_of_parse_nodes() in drivers/media/platform/omap3isp/isp.c if you're
interested. Up to you.
> + chan->inputs[i].input.std = V4L2_STD_ALL;
> + chan->inputs[i].input.capabilities = V4L2_IN_CAP_STD;
> +
> + /* FIXME: need a new property? ch0:composite ch1: s-video */
> + if (i == 0)
Can you assume that the first endopoint has got a particular kind of input?
What if it's not connected?
If this is a different physical port (not in the meaning another) in the
device, I'd use the reg property for this. Please see
Documentation/devicetree/bindings/media/video-interfaces.txt .
> + chan->inputs[i].input_route = INPUT_CVBS_VI2B;
> + else
> + chan->inputs[i].input_route = INPUT_SVIDEO_VI2C_VI1C;
> + chan->inputs[i].output_route = OUTPUT_10BIT_422_EMBEDDED_SYNC;
> +
> + err = v4l2_of_parse_endpoint(endpoint, &bus_cfg);
> + if (err) {
> + dev_err(&pdev->dev, "Could not parse the endpoint\n");
> + goto done;
> + }
> + dev_dbg(&pdev->dev, "Endpoint %s, bus_width = %d\n",
> + endpoint->full_name, bus_cfg.bus.parallel.bus_width);
> + flags = bus_cfg.bus.parallel.flags;
> +
> + if (flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH)
> + chan->vpif_if.hd_pol = 1;
> +
> + if (flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH)
> + chan->vpif_if.vd_pol = 1;
> +
> + chan->vpif_if.if_type = VPIF_IF_BT656;
> + rem = of_graph_get_remote_port_parent(endpoint);
> + if (!rem) {
> + dev_dbg(&pdev->dev, "Remote device at %s not found\n",
> + endpoint->full_name);
> + goto done;
> + }
> +
> + dev_dbg(&pdev->dev, "Remote device %s, %s found\n",
> + rem->name, rem->full_name);
> + sdinfo->name = rem->full_name;
> +
> + pdata->asd[i] = devm_kzalloc(&pdev->dev,
> + sizeof(struct v4l2_async_subdev),
> + GFP_KERNEL);
Do you ensure somewhere that i isn't overrunning the pdata->asd[] array?
It's got VPIF_CAPTURE_MAX_CHANNELS entries.
> + if (!pdata->asd[i]) {
> + of_node_put(rem);
> + pdata = NULL;
> + goto done;
> + }
> +
> + pdata->asd[i]->match_type = V4L2_ASYNC_MATCH_OF;
> + pdata->asd[i]->match.of.node = rem;
> + of_node_put(rem);
> + }
> +
> +done:
> + pdata->asd_sizes[0] = i;
> + pdata->subdev_count = i;
> + pdata->card_name = "DA850/OMAP-L138 Video Capture";
> +
> + return pdata;
> +}
> +
> /**
> * vpif_probe : This function probes the vpif capture driver
> * @pdev: platform device pointer
> @@ -1438,6 +1563,7 @@ static __init int vpif_probe(struct platform_device
> *pdev)
> int res_idx = 0;
> int i, err;
>
> + pdev->dev.platform_data = vpif_capture_get_pdata(pdev);
> if (!pdev->dev.platform_data) {
> dev_warn(&pdev->dev, "Missing platform data. Giving up.\n");
> return -EINVAL;
> @@ -1480,7 +1606,7 @@ static __init int vpif_probe(struct platform_device
> *pdev)
> goto vpif_unregister;
> }
>
> - if (!vpif_obj.config->asd_sizes) {
> + if (!vpif_obj.config->asd_sizes[0]) {
> i2c_adap = i2c_get_adapter(1);
> for (i = 0; i < subdev_count; i++) {
> subdevdata = &vpif_obj.config->subdev_info[i];
> diff --git a/include/media/davinci/vpif_types.h
> b/include/media/davinci/vpif_types.h
> index 3cb1704a0650..4ee3b41975db 100644
> --- a/include/media/davinci/vpif_types.h
> +++ b/include/media/davinci/vpif_types.h
> @@ -65,14 +65,14 @@ struct vpif_display_config {
>
> struct vpif_input {
> struct v4l2_input input;
> - const char *subdev_name;
> + char *subdev_name;
> u32 input_route;
> u32 output_route;
> };
>
> struct vpif_capture_chan_config {
> struct vpif_interface vpif_if;
> - const struct vpif_input *inputs;
> + struct vpif_input *inputs;
> int input_count;
> };
>
> @@ -83,7 +83,8 @@ struct vpif_capture_config {
> struct vpif_subdev_info *subdev_info;
> int subdev_count;
> const char *card_name;
> - struct v4l2_async_subdev **asd; /* Flat array, arranged in groups */
> - int *asd_sizes; /* 0-terminated array of asd group sizes */
> +
> + struct v4l2_async_subdev *asd[VPIF_CAPTURE_MAX_CHANNELS];
> + int asd_sizes[VPIF_CAPTURE_MAX_CHANNELS];
> };
> #endif /* _VPIF_TYPES_H */
--
Kind regards,
Sakari Ailus
e-mail: sakari.ai...@iki.fi XMPP: sai...@retiisi.org.uk
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
