From: Bastien Nocera<had...@hadess.net>
Register an input device with one button, and for the supported
OV511 webcams, poll and check whether the snapshot button has been
pressed on each new frame.
[d...@mail.ru: fix freeing of phys, plug into Kconfig, make compile]
Signed-off-by: Bastien Nocera<had...@hadess.net>
Signed-off-by: Dmitry Torokhov<d...@mail.ru>
---
Mauro,
This is something that's been sitting in my queue for quite some
time, please consider applying.
Thanks!
drivers/media/video/Kconfig | 8 +++
drivers/media/video/ov511.c | 109 +++++++++++++++++++++++++++++++++++++++----
drivers/media/video/ov511.h | 8 +++
3 files changed, 116 insertions(+), 9 deletions(-)
diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig
index dcf9fa9..42573e0 100644
--- a/drivers/media/video/Kconfig
+++ b/drivers/media/video/Kconfig
@@ -888,6 +888,14 @@ config USB_OV511
To compile this driver as a module, choose M here: the
module will be called ov511.
+config USB_OV511_SNAPSHOT_BUTTON
+ bool "USB OV511 Snapshot Button support"
+ depends on USB_OV511
+ depends on INPUT
+ ---help---
+ Say Y here if you want the driver to report snapshot button through
+ input layer.
+
config USB_SE401
tristate "USB SE401 Camera support"
depends on VIDEO_V4L1
diff --git a/drivers/media/video/ov511.c b/drivers/media/video/ov511.c
index 0bc2cf5..484165c 100644
--- a/drivers/media/video/ov511.c
+++ b/drivers/media/video/ov511.c
@@ -44,6 +44,8 @@
#include<asm/processor.h>
#include<linux/mm.h>
#include<linux/device.h>
+#include<linux/input.h>
+#include<linux/usb/input.h>
#if defined (__i386__)
#include<asm/cpufeature.h>
@@ -92,7 +94,7 @@ static int cams = 1;
static int compress;
static int testpat;
static int dumppix;
-static int led = 1;
+static int led = 1;
static int dump_bridge;
static int dump_sensor;
static int printph;
@@ -352,6 +354,83 @@ rvfree(void *mem, unsigned long size)
/**********************************************************************
*
+ * Input device
+ *
+ **********************************************************************/
+#ifdef CONFIG_USB_OV511_SNAPSHOT_BUTTON
+
+static int ov511_input_init(struct usb_ov511 *ov)
+{
+ struct usb_device *udev = ov->dev;
+ struct input_dev *input;
+ int err = -ENOMEM;
+
+ input = input_allocate_device();
+ if (!input)
+ goto err_out;
+
+ usb_make_path(udev, ov->key_phys, OV511_KEY_PHYS_SIZE);
+ strlcat(ov->key_phys, "/input0", OV511_KEY_PHYS_SIZE);
+
+ input->name = "OV511 Snapshot Button";
+ input->phys = ov->key_phys;
+ usb_to_input_id(udev,&input->id);
+ input->dev.parent =&udev->dev;
+
+ __set_bit(EV_KEY, input->evbit);
+ __set_bit(KEY_CAMERA, input->keybit);
+
+ err = input_register_device(input);
+ if (err)
+ goto err_out;
+
+ ov->key_input = input;
+ return 0;
+
+err_out:
+ input_free_device(input);
+ return err;
+}
+
+static void ov511_input_cleanup(struct usb_ov511 *ov)
+{
+ if (ov->key_input) {
+ input_unregister_device(ov->key_input);
+ ov->key_input = NULL;
+ }
+}
+
+static void ov511_input_report_key(struct usb_ov511 *ov)
+{
+ struct input_dev *input = ov->key_input;
+
+ if (input) {
+ input_report_key(input, KEY_CAMERA, 1);
+ input_sync(input);
+ input_report_key(input, KEY_CAMERA, 0);
+ input_sync(input);
+ }
+}
+
+#else
+
+static inline int ov511_input_init(struct usb_ov511 *ov)
+{
+ return 0;
+}
+
+static inline void ov511_input_cleanup(struct usb_ov511 *ov)
+{
+}
+
+static inline void ov511_input_report_key(struct usb_ov511 *ov)
+{
+}
+
+#endif /* CONFIG_USB_OV511_SNAPSHOT_BUTTON */
+
+/**********************************************************************
+ *
* Register I/O
*
**********************************************************************/
@@ -1105,7 +1184,6 @@ ov51x_clear_snapshot(struct usb_ov511 *ov)
}
}
-#if 0
/* Checks the status of the snapshot button. Returns 1 if it was pressed since
* it was last cleared, and zero in all other cases (including errors) */
static int
@@ -1130,7 +1208,6 @@ ov51x_check_snapshot(struct usb_ov511 *ov)
return status;
}
-#endif
/* This does an initial reset of an OmniVision sensor and ensures that I2C
* is synchronized. Returns<0 for failure.
@@ -3149,10 +3226,10 @@ ov51x_postprocess_yuv420(struct usb_ov511 *ov, struct
ov511_frame *frame)
}
/* Post-processes the specified frame. This consists of:
- * 1. Decompress frame, if necessary
+ * 1. Decompress frame, if necessary
* 2. Deinterlace frame and scale to proper size, if necessary
- * 3. Convert from YUV planar to destination format, if necessary
- * 4. Fix the RGB offset, if necessary
+ * 3. Convert from YUV planar to destination format, if necessary
+ * 4. Fix the RGB offset, if necessary
*/
static void
ov51x_postprocess(struct usb_ov511 *ov, struct ov511_frame *frame)
@@ -4387,6 +4464,11 @@ redo:
if ((ov->snap_enabled)&& (frame->snapshot)) {
frame->snapshot = 0;
ov51x_clear_snapshot(ov);
+ } else if (!ov->snap_enabled&& ov->bclass ==
BCL_OV511) {
+ if (ov51x_check_snapshot(ov) == 1) {
+ ov511_input_report_key(ov);
+ ov51x_clear_snapshot(ov);
+ }
}
/* Decompression, format conversion, etc... */
@@ -5237,7 +5319,7 @@ ov511_configure(struct usb_ov511 *ov)
};
static struct ov511_regvals aRegvalsNorm511[] = {
- { OV511_REG_BUS, R511_DRAM_FLOW_CTL, 0x01 },
+ { OV511_REG_BUS, R511_DRAM_FLOW_CTL, 0x01 },
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x00 },
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x02 },
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x00 },
@@ -5400,7 +5482,7 @@ ov518_configure(struct usb_ov511 *ov)
static struct ov511_regvals aRegvalsNorm518[] = {
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x02 }, /* Reset */
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x01 }, /* Enable */
- { OV511_REG_BUS, 0x31, 0x0f },
+ { OV511_REG_BUS, 0x31, 0x0f },
{ OV511_REG_BUS, 0x5d, 0x03 },
{ OV511_REG_BUS, 0x24, 0x9f },
{ OV511_REG_BUS, 0x25, 0x90 },
@@ -5413,7 +5495,7 @@ ov518_configure(struct usb_ov511 *ov)
static struct ov511_regvals aRegvalsNorm518Plus[] = {
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x02 }, /* Reset */
{ OV511_REG_BUS, R51x_SYS_SNAP, 0x01 }, /* Enable */
- { OV511_REG_BUS, 0x31, 0x0f },
+ { OV511_REG_BUS, 0x31, 0x0f },
{ OV511_REG_BUS, 0x5d, 0x03 },
{ OV511_REG_BUS, 0x24, 0x9f },
{ OV511_REG_BUS, 0x25, 0x90 },
@@ -5880,6 +5962,13 @@ ov51x_probe(struct usb_interface *intf, const struct
usb_device_id *id)
mutex_lock(&ov->lock);
+ /* Snapshot is currently only supported on OV511,
+ * so no need to register the input device if it's not supported */
+ if (!ov->snap_enabled&& ov->bclass == BCL_OV511) {
+ if (ov511_input_init(ov)< 0)
+ dev_warn(&ov->dev->dev, "Could not register input
device\n");
+ }
+
return 0;
error:
@@ -5928,6 +6017,8 @@ ov51x_disconnect(struct usb_interface *intf)
if (ov->vdev)
video_unregister_device(ov->vdev);
+ ov511_input_cleanup(ov);
+
for (n = 0; n< OV511_NUMFRAMES; n++)
ov->frame[n].grabstate = FRAME_ERROR;
diff --git a/drivers/media/video/ov511.h b/drivers/media/video/ov511.h
index c450c92..7c0ade1 100644
--- a/drivers/media/video/ov511.h
+++ b/drivers/media/video/ov511.h
@@ -259,6 +259,9 @@
/* Size of usb_make_path() buffer */
#define OV511_USB_PATH_LEN 64
+/* Size of 'phys' field for the snapshot button input device */
+#define OV511_KEY_PHYS_SIZE 64
+
/* Bridge types */
enum {
BRG_UNKNOWN,
@@ -469,6 +472,11 @@ struct usb_ov511 {
int snap_enabled; /* Snapshot mode enabled */
+#ifdef CONFIG_USB_OV511_SNAPSHOT_BUTTON
+ struct input_dev *key_input;
+ char key_phys[OV511_KEY_PHYS_SIZE];
+#endif
+
int bridge; /* Type of bridge (BRG_*) */
int bclass; /* Class of bridge (BCL_*) */
int sensor; /* Type of image sensor chip (SEN_*) */
