On Wed, 12 Aug 2015, Markus Pargmann wrote:
> Signed-off-by: Markus Pargmann <[email protected]>
the spelling of Bosch is inconsistent, sometimes it is BOSCH, I'd prefer
the former
please find a slightly more relevant comment below :)
> ---
> drivers/iio/gyro/Kconfig | 11 +++++++++
> drivers/iio/gyro/Makefile | 1 +
> drivers/iio/gyro/bmg160_spi.c | 57
> +++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 69 insertions(+)
> create mode 100644 drivers/iio/gyro/bmg160_spi.c
>
> diff --git a/drivers/iio/gyro/Kconfig b/drivers/iio/gyro/Kconfig
> index 13f8e0051615..a77dbb0062fe 100644
> --- a/drivers/iio/gyro/Kconfig
> +++ b/drivers/iio/gyro/Kconfig
> @@ -71,6 +71,17 @@ config BMG160_I2C
> This driver can also be built as a module. If so, the module
> will be called bmg160_i2c.
>
> +config BMG160_SPI
> + tristate "Driver for connection via SPI"
> + depends on SPI
> + select REGMAP_SPI
> + help
> + Say yes here to build support for Bosch BMG160 Tri-axis Gyro Sensor
> + driver connected via SPI. This driver also supports BMI055 gyroscope.
> +
> + This driver can also be built as a module. If so, the module
> + will be called bmg160_spi.
> +
> endif
>
> config HID_SENSOR_GYRO_3D
> diff --git a/drivers/iio/gyro/Makefile b/drivers/iio/gyro/Makefile
> index 73b41e43a974..848e55c605c0 100644
> --- a/drivers/iio/gyro/Makefile
> +++ b/drivers/iio/gyro/Makefile
> @@ -9,6 +9,7 @@ obj-$(CONFIG_ADIS16136) += adis16136.o
> obj-$(CONFIG_ADIS16260) += adis16260.o
> obj-$(CONFIG_ADXRS450) += adxrs450.o
> obj-$(CONFIG_BMG160_I2C) += bmg160_core.o bmg160_i2c.o
> +obj-$(CONFIG_BMG160_I2C) += bmg160_core.o bmg160_spi.o
>
> obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o
>
> diff --git a/drivers/iio/gyro/bmg160_spi.c b/drivers/iio/gyro/bmg160_spi.c
> new file mode 100644
> index 000000000000..8a358571b702
> --- /dev/null
> +++ b/drivers/iio/gyro/bmg160_spi.c
> @@ -0,0 +1,57 @@
> +#include <linux/spi/spi.h>
> +#include <linux/regmap.h>
> +#include <linux/iio/iio.h>
> +#include <linux/module.h>
> +
> +#include <bmg160.h>
I think this should be
#include "bmg160.h"
as in the _i2c part of the driver
> +
> +static const struct regmap_config bmg160_regmap_spi_conf = {
> + .reg_bits = 8,
> + .val_bits = 8,
> + .max_register = 0x3f,
> +};
> +
> +static int bmg160_spi_probe(struct spi_device *spi)
> +{
> + struct regmap *regmap;
> + const struct spi_device_id *id = spi_get_device_id(spi);
> +
> + regmap = devm_regmap_init_spi(spi, &bmg160_regmap_spi_conf);
> + if (IS_ERR(regmap)) {
> + dev_err(&spi->dev, "Failed to register spi regmap %d\n",
> + (int)PTR_ERR(regmap));
> + return PTR_ERR(regmap);
> + }
> +
> + return bmg160_core_probe(&spi->dev, regmap, spi->irq, id->name);
> +}
> +
> +static int bmg160_spi_remove(struct spi_device *spi)
> +{
> + bmg160_core_remove(&spi->dev);
> +
> + return 0;
> +}
> +
> +static const struct spi_device_id bmg160_spi_id[] = {
> + {"bmg160", 0},
> + {"bmi055_gyro", 0},
> + {}
> +};
> +
> +MODULE_DEVICE_TABLE(spi, bmg160_spi_id);
> +
> +static struct spi_driver bmg160_spi_driver = {
> + .driver = {
> + .name = "bmg160_spi",
> + .pm = &bmg160_pm_ops,
> + },
> + .probe = bmg160_spi_probe,
> + .remove = bmg160_spi_remove,
> + .id_table = bmg160_spi_id,
> +};
> +module_spi_driver(bmg160_spi_driver);
> +
> +MODULE_AUTHOR("Markus Pargmann <[email protected]>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DESCRIPTION("BMG160 SPI Gyro driver");
>
--
Peter Meerwald
+43-664-2444418 (mobile)
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
