Hi Janusz, > Janusz Użycki <[email protected]> hat am 10. August 2015 um > 19:01 geschrieben: > > > > > W dniu 2015-08-10 o 14:22, Fabio Estevam pisze: > > On Mon, Aug 10, 2015 at 9:12 AM, Stefan Wahren <[email protected]> > > wrote: > > > >> /* set baud rate */ > >> - baud = uart_get_baud_rate(u, termios, old, 0, u->uartclk); > >> + baud_min = u->uartclk * 32 / 0x3fffc0; > >> + baud_max = u->uartclk * 32 / 0xec; > >> + baud = uart_get_baud_rate(u, termios, old, baud_min, baud_max); > > Looks good. It would be nice to replace 0x3fffc0 and 0xec with defines > > though. > > I agree with Fabio.
i will name them AUART_LINECTRL_BAUD_DIV_MIN and AUART_LINECTRL_BAUD_DIV_MAX. > > In addition let's look at the example for uartclk = 24MHz: > baud_max = 3,254,237.29 => will be rounded down to 3,254,237bauds and it > is OK > baud_min = 183.1 => will be rounded to 183 bauds. To avoid div=0x400971 > it should be 184 > so DIV_ROUND_UP() macro could be used. Thanks for pointing out. I will fix that. Best regards Stefan > > best regards > Janusz > > > > > Regards, > > > > Fabio Estevam > > -- > To unsubscribe from this list: send the line "unsubscribe linux-kernel" in > the body of a message to [email protected] > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
