On Tue, 2005-08-09 at 17:19 +1000, Daniel Pittman wrote: > I recently installed a SCSI tape drive and Adaptec AHA-2940U2W SCSI > controller into my server to run backups. > > Since then, the driver issues these warnings on a semi-regular basis > while the drive is busy: > > Aug 9 17:00:26 anu kernel: scsi0: Data Parity Error Detected during address > or write data phase > Aug 9 17:00:26 anu kernel: scsi0: PCI error Interrupt at seqaddr = 0x8
Make sure the hardware is all installed correctly. Check that the card is fully seated, or try it in another PCI slot. Also check your cabling and termination. Lee - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
