On Thu, Mar 12, 2015 at 1:42 PM, Wolfram Sang <[email protected]> wrote:
> --- /dev/null
> +++ b/Documentation/i2c/slave-interface
> @@ -0,0 +1,178 @@
> +Linux I2C slave interface description
> +=====================================
> +
> +by Wolfram Sang <[email protected]> in 2014-15
> +
> +Finally, Linux can also be an I2C slave in case I2C controllers have slave
> +support. Besides this HW requirement, one also needs a software backend
> +providing the actual functionality. An example for this is the slave-eeprom
> +driver, which acts as a dual memory driver. While another I2C master on the
> bus
> +can access it like a regular eeprom, the Linux I2C slave can access the
> content
EEPROM (to match [PATCH 3/3])
contents
> +via sysfs and retrieve/provide information as needed. The software backend
> +About ACK/NACK
> +--------------
> +
> +It is good behaviour to always ACK the address phase, so the master knows if
> a
> +device is basically present or if it mysteriously disappeared. Using NACK to
> +state being busy is troublesome. SMBus demands to always ACK the address
> phase,
> +while I2C specification is more loose on that. Most I2C controllers also
the I2C specification
> +automatically ACK when detecting its slave address, so there is no option to
their slave addresses
> +NACK it. For those reasons, this API does not support NACK in the address
NACK them.
> +phase.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- [email protected]
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Please read the FAQ at http://www.tux.org/lkml/
