On Thu, Feb 5, 2015 at 4:49 PM, Geert Uytterhoeven <[email protected]> wrote:
> The pcf857x GPIO and interrupt controller uses dummy_irq_chip, which > does not implement irq_chip.irq_set_wake() and does not set > IRQCHIP_SKIP_SET_WAKE. > > This causes two s2ram issues if wake-up is enabled for the pcf857x GPIO > pins: > 1. During resume from s2ram, the following warning is printed: > > WARNING: CPU: 0 PID: 1046 at kernel/irq/manage.c:537 > irq_set_irq_wake+0x9c/0xf8() > Unbalanced IRQ 113 wake disable > > 2. Wake-up through the pcf857x GPIO pins may fail, as the parent > interrupt controller may be suspended. > > Migrate the pcf857x GPIO and interrupt controller from dummy_irq_chip to > its own irq_chip. This irq chip implements irq_chip.irq_set_wake() to > propagate its wake-up setting to the parent interrupt controller. > > This fixes wake-up through gpio-keys on sh73a0/kzm9g, where the pcf857x > interrupt is cascaded to irq-renesas-intc-irqpin, and the latter must > not be suspended when wake-up is enabled. > > Signed-off-by: Geert Uytterhoeven <[email protected]> > --- > v2: > - Rebased on top of "gpio: pcf857x: Switch to use gpiolib irqchip > helpers". Patch applied. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
