Le 11/12/2014 20:31, Thomas Petazzoni a écrit :
> Dear Cyrille Pitchen,
> 
> On Thu, 11 Dec 2014 11:16:51 +0100, Cyrille Pitchen wrote:
> 
>> +#define GEM_ISR1                            0x0400
>> +#define GEM_ISR2                            0x0404
>> +#define GEM_ISR3                            0x0408
>> +#define GEM_ISR4                            0x040c
>> +#define GEM_ISR5                            0x0410
>> +#define GEM_ISR6                            0x0414
>> +#define GEM_ISR7                            0x0418
> 
> What about doing instead:
> 
> #define GEM_ISR(q)                            ((q) == 0 ? MACB_ISR : 0x400 + 
> (q) << 2)
> 
> And ditto for all other registers, which will save a lot of boring repeated 
> code.
> 
> If you do that, then you can avoid the following fields in the
> macb_queue structure:
> 
> +     unsigned int            ISR;
> +     unsigned int            IER;
> +     unsigned int            IDR;
> +     unsigned int            IMR;
> +     unsigned int            TBQP;
> 
> And the not very pleasant calculation of those offsets:
> 
> +     bp->queues[0].bp = bp;
> +     bp->queues[0].ISR  = MACB_ISR;
> +     bp->queues[0].IER  = MACB_IER;
> +     bp->queues[0].IDR  = MACB_IDR;
> +     bp->queues[0].IMR  = MACB_IMR;
> +     bp->queues[0].TBQP = MACB_TBQP;
> +     for (q = 1, queue = &bp->queues[1]; q < MACB_MAX_QUEUES; ++q) {
> +             if (!(queue_mask & (1 << q)))
> +                     continue;
> +
> +             queue->bp = bp;
> +             queue->ISR  = (q-1) * sizeof(u32) + GEM_ISR1;
> +             queue->IER  = (q-1) * sizeof(u32) + GEM_IER1;
> +             queue->IDR  = (q-1) * sizeof(u32) + GEM_IDR1;
> +             queue->IMR  = (q-1) * sizeof(u32) + GEM_IMR1;
> +             queue->TBQP = (q-1) * sizeof(u32) + GEM_TBQP1;
> +             queue++;
> +     }
> 
> You replace the ISR, IER, IDR, IMR and TBQP by an "id" field in
> macb_queue, which contains the queue number, and then change your:
> 
> +#define queue_readl(queue, reg)                              \
> +     __raw_readl((queue)->bp->regs + queue->reg)
> +#define queue_writel(queue, reg, value)                      \
> +     __raw_writel((value), (queue)->bp->regs + queue->reg)
> 
> to
> 
> +#define queue_readl(queue, reg)                              \
> +     __raw_readl((queue)->bp->regs + reg((queue)->id))
> +#define queue_writel(queue, reg, value)                      \
> +     __raw_writel((value), (queue)->bp->regs + reg((queue)->id)
> 
> Best regards,
> 
> Thomas
> 
Good idea, I'm working on it.

Thanks,

Cyrille
--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to