[    0.000000] Linux version 3.18.0-rc4+ (eb@blackout) (gcc version 4.8.3 (CRUX) ) #1 SMP PREEMPT Thu Nov 13 22:21:48 CET 2014
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-git root=/dev/sda4 rootfstype=ext4 rootflags=data=writeback ro quiet drm.debug=0xe
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb27bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb27c000-0x00000000bb281fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb282000-0x00000000bb35efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb35f000-0x00000000bb370fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb371000-0x00000000bb3f1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb3f2000-0x00000000bb40efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb40f000-0x00000000bb46efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb46f000-0x00000000bb667fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb668000-0x00000000bb6e7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb6e8000-0x00000000bb70efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb70f000-0x00000000bb716fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb717000-0x00000000bb71efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb71f000-0x00000000bb76bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb76c000-0x00000000bb777fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb778000-0x00000000bb77afff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bb77b000-0x00000000bb78afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb78b000-0x00000000bb78bfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bb78c000-0x00000000bb79efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb79f000-0x00000000bb7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: LENOVO 3323L7T/3323L7T, BIOS 6QET69WW (1.39 ) 04/26/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 disabled
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 100000000 mask FC0000000 write-back
[    0.000000]   4 base 138000000 mask FF8000000 uncachable
[    0.000000]   5 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 1, base: 0GB, range: 2GB, type WB
[    0.000000] reg 2, base: 2GB, range: 1GB, type WB
[    0.000000] reg 3, base: 4GB, range: 1GB, type WB
[    0.000000] reg 4, base: 4992MB, range: 128MB, type UC
[    0.000000] reg 5, base: 3008MB, range: 64MB, type UC
[    0.000000] total RAM covered: 3904M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 256M 	num_reg: 5  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3008MB, range: 64MB, type UC
[    0.000000] reg 3, base: 4GB, range: 1GB, type WB
[    0.000000] reg 4, base: 4992MB, range: 128MB, type UC
[    0.000000] e820: update [mem 0xbc000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01be6000, 0x01be6fff] PGTABLE
[    0.000000] BRK [0x01be7000, 0x01be7fff] PGTABLE
[    0.000000] BRK [0x01be8000, 0x01be8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x137e00000-0x137ffffff]
[    0.000000]  [mem 0x137e00000-0x137ffffff] page 2M
[    0.000000] BRK [0x01be9000, 0x01be9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x134000000-0x137dfffff]
[    0.000000]  [mem 0x134000000-0x137dfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x133ffffff]
[    0.000000]  [mem 0x100000000-0x133ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbb27bfff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbb1fffff] page 2M
[    0.000000]  [mem 0xbb200000-0xbb27bfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbb282000-0xbb35efff]
[    0.000000]  [mem 0xbb282000-0xbb35efff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbb40f000-0xbb46efff]
[    0.000000]  [mem 0xbb40f000-0xbb46efff] page 4k
[    0.000000] BRK [0x01bea000, 0x01beafff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbb70f000-0xbb716fff]
[    0.000000]  [mem 0xbb70f000-0xbb716fff] page 4k
[    0.000000] BRK [0x01beb000, 0x01bebfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbb71f000-0xbb76bfff]
[    0.000000]  [mem 0xbb71f000-0xbb76bfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbb7ff000-0xbb7fffff]
[    0.000000]  [mem 0xbb7ff000-0xbb7fffff] page 4k
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F68E0 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000BB7F0826 000094 (v01 LENOVO TP-6Q    00001390  LTP 00000000)
[    0.000000] ACPI: FACP 0x00000000BB7F0900 0000F4 (v04 LENOVO TP-6Q    00001390 LNVO 00000001)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20140926/tbfadt-618)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20140926/tbfadt-699)
[    0.000000] ACPI: DSDT 0x00000000BB7F0C6B 00DE70 (v01 LENOVO TP-6Q    00001390 MSFT 03000001)
[    0.000000] ACPI: FACS 0x00000000BB6E7000 000040
[    0.000000] ACPI: SSDT 0x00000000BB7F0AB4 0001B7 (v01 LENOVO TP-6Q    00001390 MSFT 03000001)
[    0.000000] ACPI: ECDT 0x00000000BB7FEADB 000052 (v01 LENOVO TP-6Q    00001390 LNVO 00000001)
[    0.000000] ACPI: APIC 0x00000000BB7FEB2D 000084 (v01 LENOVO TP-6Q    00001390 LNVO 00000001)
[    0.000000] ACPI: MCFG 0x00000000BB7FEBE9 00003C (v01 LENOVO TP-6Q    00001390 LNVO 00000001)
[    0.000000] ACPI: HPET 0x00000000BB7FEC25 000038 (v01 LENOVO TP-6Q    00001390 LNVO 00000001)
[    0.000000] ACPI: ASF! 0x00000000BB7FEDBE 0000A4 (v16 LENOVO TP-6Q    00001390 PTL  00000001)
[    0.000000] ACPI: SLIC 0x00000000BB7FEE62 000176 (v01 LENOVO TP-6Q    00001390  LTP 00000000)
[    0.000000] ACPI: BOOT 0x00000000BB7FEFD8 000028 (v01 LENOVO TP-6Q    00001390  LTP 00000001)
[    0.000000] ACPI: SSDT 0x00000000BB6E590A 00085B (v01 LENOVO TP-6Q    00001390 INTL 20050513)
[    0.000000] ACPI: TCPA 0x00000000BB78B000 000032 (v02 PTL     CRESTLN 06040000      00005A52)
[    0.000000] ACPI: SSDT 0x00000000BB77A000 0009F1 (v01 PmRef  CpuPm    00003000 INTL 20050513)
[    0.000000] ACPI: SSDT 0x00000000BB779000 000259 (v01 PmRef  Cpu0Tst  00003000 INTL 20050513)
[    0.000000] ACPI: SSDT 0x00000000BB778000 00049F (v01 PmRef  ApTst    00003000 INTL 20050513)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133800000-ffff8801375fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x137ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0xbb27bfff]
[    0.000000]   node   0: [mem 0xbb282000-0xbb35efff]
[    0.000000]   node   0: [mem 0xbb40f000-0xbb46efff]
[    0.000000]   node   0: [mem 0xbb70f000-0xbb716fff]
[    0.000000]   node   0: [mem 0xbb71f000-0xbb76bfff]
[    0.000000]   node   0: [mem 0xbb7ff000-0xbb7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x137ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00001000-0x137ffffff]
[    0.000000] On node 0 totalpages: 996268
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11921 pages used for memmap
[    0.000000]   DMA32 zone: 762895 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 229376 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff880137c00000 s75840 r8192 d30656 u524288
[    0.000000] pcpu-alloc: s75840 r8192 d30656 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 980678
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-git root=/dev/sda4 rootfstype=ext4 rootflags=data=writeback ro quiet drm.debug=0xe
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Memory: 3836552K/3985072K available (6325K kernel code, 477K rwdata, 1360K rodata, 768K init, 664K bss, 148520K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] NR_IRQS:4352 nr_irqs:456 0
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-3.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2128.056 MHz processor
[    0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4256.11 BogoMIPS (lpj=2128056)
[    0.000032] pid_max: default: 32768 minimum: 301
[    0.000036] ACPI: Core revision 20140926
[    0.010804] ACPI: All ACPI Tables successfully acquired
[    0.019523] Security Framework initialized
[    0.019526] Yama: becoming mindful.
[    0.019539] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.019541] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.019752] CPU: Physical Processor ID: 0
[    0.019753] CPU: Processor Core ID: 0
[    0.019758] mce: CPU supports 9 MCE banks
[    0.019769] CPU0: Thermal monitoring enabled (TM1)
[    0.019779] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.019914] Freeing SMP alternatives memory: 24K (ffffffff81b39000 - ffffffff81b3f000)
[    0.020466] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.030464] smpboot: CPU0: Intel(R) Core(TM) i3 CPU       M 330  @ 2.13GHz (fam: 06, model: 25, stepping: 02)
[    0.131512] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.131532] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.131534] ... version:                3
[    0.131535] ... bit width:              48
[    0.131536] ... generic registers:      4
[    0.131537] ... value mask:             0000ffffffffffff
[    0.131539] ... max period:             000000007fffffff
[    0.131540] ... fixed-purpose events:   3
[    0.131541] ... event mask:             000000070000000f
[    0.139624] x86: Booting SMP configuration:
[    0.139626] .... node  #0, CPUs:      #1 #2 #3
[    0.182859] x86: Booted up 1 node, 4 CPUs
[    0.182863] smpboot: Total of 4 processors activated (17024.44 BogoMIPS)
[    0.184997] devtmpfs: initialized
[    0.185216] PM: Registering ACPI NVS region [mem 0xbb371000-0xbb3f1fff] (528384 bytes)
[    0.185225] PM: Registering ACPI NVS region [mem 0xbb668000-0xbb6e7fff] (524288 bytes)
[    0.185233] PM: Registering ACPI NVS region [mem 0xbb76c000-0xbb777fff] (49152 bytes)
[    0.185235] PM: Registering ACPI NVS region [mem 0xbb77b000-0xbb78afff] (65536 bytes)
[    0.185238] PM: Registering ACPI NVS region [mem 0xbb78c000-0xbb79efff] (77824 bytes)
[    0.185431] NET: Registered protocol family 16
[    0.188498] cpuidle: using governor ladder
[    0.191494] cpuidle: using governor menu
[    0.191577] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.191584] ACPI: bus type PCI registered
[    0.191631] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.191634] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.191907] PCI: Using configuration type 1 for base access
[    0.196752] ACPI: Added _OSI(Module Device)
[    0.196754] ACPI: Added _OSI(Processor Device)
[    0.196756] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.196757] ACPI: Added _OSI(Processor Aggregator Device)
[    0.198203] ACPI : EC: EC description table is found, configuring boot EC
[    0.202347] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.280819] ACPI: Dynamic OEM Table Load:
[    0.280827] ACPI: SSDT 0xFFFF880133780000 00042D (v01 PmRef  Cpu0Ist  00003000 INTL 20050513)
[    0.281320] ACPI: Dynamic OEM Table Load:
[    0.281326] ACPI: SSDT 0xFFFF880133780800 0006B2 (v01 PmRef  Cpu0Cst  00003001 INTL 20050513)
[    0.287701] ACPI: Dynamic OEM Table Load:
[    0.287707] ACPI: SSDT 0xFFFF880133735800 000303 (v01 PmRef  ApIst    00003000 INTL 20050513)
[    0.290566] ACPI: Dynamic OEM Table Load:
[    0.290572] ACPI: SSDT 0xFFFF880133725400 000119 (v01 PmRef  ApCst    00003000 INTL 20050513)
[    0.295081] ACPI: Interpreter enabled
[    0.295089] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[    0.295093] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[    0.295105] ACPI: (supports S0 S3 S5)
[    0.295106] ACPI: Using IOAPIC for interrupt routing
[    0.295131] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.298773] ACPI: Power Resource [PUBS] (on)
[    0.302359] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.302448] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    0.302515] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.302599] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.302682] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.302747] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.302816] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.302900] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.302981] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[    0.302987] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.302991] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.303022] PCI host bridge to bus 0000:ff
[    0.303024] pci_bus 0000:ff: root bus resource [bus ff]
[    0.303032] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[    0.303088] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.303138] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.303183] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.303227] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.303270] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.303323] pci_bus 0000:ff: on NUMA node 0
[    0.303344] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.303348] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.303520] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.303597] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.303600] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.303602] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.303604] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.303653] PCI host bridge to bus 0000:00
[    0.303655] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.303658] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.303659] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.303661] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.303663] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.303665] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.303667] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.303669] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[    0.303676] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.303757] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[    0.303769] pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf23fffff 64bit]
[    0.303776] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.303781] pci 0000:00:02.0: reg 0x20: [io  0x1800-0x1807]
[    0.303898] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.303928] pci 0000:00:16.0: reg 0x10: [mem 0xf2727800-0xf272780f 64bit]
[    0.304027] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.304115] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[    0.304142] pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
[    0.304153] pci 0000:00:19.0: reg 0x14: [mem 0xf2525000-0xf2525fff]
[    0.304165] pci 0000:00:19.0: reg 0x18: [io  0x1820-0x183f]
[    0.304255] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.304293] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.304341] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.304367] pci 0000:00:1a.0: reg 0x10: [mem 0xf2728000-0xf27283ff]
[    0.304484] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.304523] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.304572] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.304597] pci 0000:00:1b.0: reg 0x10: [mem 0xf2520000-0xf2523fff 64bit]
[    0.304709] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.304753] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.304800] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.304911] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.304951] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.304998] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[    0.305107] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.305147] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.305189] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[    0.305299] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.305339] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.305391] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.305417] pci 0000:00:1d.0: reg 0x10: [mem 0xf2728400-0xf27287ff]
[    0.305533] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.305571] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.305613] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.305745] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[    0.305925] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[    0.305953] pci 0000:00:1f.2: reg 0x10: [io  0x1860-0x1867]
[    0.305964] pci 0000:00:1f.2: reg 0x14: [io  0x1814-0x1817]
[    0.305976] pci 0000:00:1f.2: reg 0x18: [io  0x1818-0x181f]
[    0.305987] pci 0000:00:1f.2: reg 0x1c: [io  0x1810-0x1813]
[    0.305998] pci 0000:00:1f.2: reg 0x20: [io  0x1840-0x185f]
[    0.306010] pci 0000:00:1f.2: reg 0x24: [mem 0xf2727000-0xf27277ff]
[    0.306080] pci 0000:00:1f.2: PME# supported from D3hot
[    0.306155] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.306177] pci 0000:00:1f.3: reg 0x10: [mem 0xf2728800-0xf27288ff 64bit]
[    0.306207] pci 0000:00:1f.3: reg 0x20: [io  0x1880-0x189f]
[    0.306300] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    0.306328] pci 0000:00:1f.6: reg 0x10: [mem 0xf2526000-0xf2526fff 64bit]
[    0.306539] pci 0000:00:1c.0: PCI bridge to [bus 0d]
[    0.306616] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.306621] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.306626] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.306634] pci 0000:00:1c.3:   bridge window [mem 0xf2800000-0xf28fffff 64bit pref]
[    0.306800] pci 0000:02:00.0: [8086:4239] type 00 class 0x028000
[    0.306876] pci 0000:02:00.0: reg 0x10: [mem 0xf2400000-0xf2401fff 64bit]
[    0.307123] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.307326] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.307333] pci 0000:00:1c.4:   bridge window [mem 0xf2400000-0xf24fffff]
[    0.307421] pci 0000:00:1e.0: PCI bridge to [bus 0e] (subtractive decode)
[    0.307435] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.307437] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.307439] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.307441] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.307443] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.307444] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.307446] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[    0.307502] pci_bus 0000:00: on NUMA node 0
[    0.308613] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.308685] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.308760] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.308762] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.308765] vgaarb: loaded
[    0.308767] vgaarb: bridge control possible 0000:00:02.0
[    0.308835] SCSI subsystem initialized
[    0.308847] libata version 3.00 loaded.
[    0.308849] ACPI: bus type USB registered
[    0.308868] usbcore: registered new interface driver usbfs
[    0.308877] usbcore: registered new interface driver hub
[    0.308899] usbcore: registered new device driver usb
[    0.308915] Linux video capture interface: v2.00
[    0.308924] pps_core: LinuxPPS API ver. 1 registered
[    0.308925] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.308928] PTP clock support registered
[    0.308948] Advanced Linux Sound Architecture Driver Initialized.
[    0.308950] PCI: Using ACPI for IRQ routing
[    0.318907] PCI: pci_cache_line_size set to 64 bytes
[    0.319011] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.319013] e820: reserve RAM buffer [mem 0xbb27c000-0xbbffffff]
[    0.319015] e820: reserve RAM buffer [mem 0xbb35f000-0xbbffffff]
[    0.319018] e820: reserve RAM buffer [mem 0xbb46f000-0xbbffffff]
[    0.319020] e820: reserve RAM buffer [mem 0xbb717000-0xbbffffff]
[    0.319023] e820: reserve RAM buffer [mem 0xbb76c000-0xbbffffff]
[    0.319025] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[    0.319207] cfg80211: Calling CRDA to update world regulatory domain
[    0.319297] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.319303] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.321329] Switched to clocksource hpet
[    0.321383] pnp: PnP ACPI init
[    0.322006] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.322009] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.322011] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.322013] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[    0.322015] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[    0.322018] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[    0.322020] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.322022] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.322024] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.322026] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.322028] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.322030] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.322033] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.322035] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.322038] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.322376] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.322379] system 00:01: [io  0x1000-0x107f] could not be reserved
[    0.322381] system 00:01: [io  0x1180-0x11ff] has been reserved
[    0.322383] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.322385] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.322387] system 00:01: [io  0x1600-0x1641] has been reserved
[    0.322390] system 00:01: [io  0x1644-0x167f] could not be reserved
[    0.322392] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.322395] system 00:01: [mem 0xfeaff000-0xfeafffff] has been reserved
[    0.322397] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.322399] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.322401] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.322403] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.322405] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.322408] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.322460] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.322486] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.322510] pnp 00:04: Plug and Play ACPI device, IDs LEN0018 PNP0f13 (active)
[    0.322786] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[    0.323210] pnp: PnP ACPI: found 6 devices
[    0.330041] pci 0000:00:1c.0: PCI bridge to [bus 0d]
[    0.330056] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.330060] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.330067] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.330072] pci 0000:00:1c.3:   bridge window [mem 0xf2800000-0xf28fffff 64bit pref]
[    0.330079] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.330085] pci 0000:00:1c.4:   bridge window [mem 0xf2400000-0xf24fffff]
[    0.330096] pci 0000:00:1e.0: PCI bridge to [bus 0e]
[    0.330110] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.330112] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.330114] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.330116] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.330118] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.330119] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.330121] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
[    0.330123] pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
[    0.330125] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[    0.330127] pci_bus 0000:05: resource 2 [mem 0xf2800000-0xf28fffff 64bit pref]
[    0.330129] pci_bus 0000:02: resource 1 [mem 0xf2400000-0xf24fffff]
[    0.330131] pci_bus 0000:0e: resource 4 [io  0x0000-0x0cf7]
[    0.330133] pci_bus 0000:0e: resource 5 [io  0x0d00-0xffff]
[    0.330135] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
[    0.330137] pci_bus 0000:0e: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.330138] pci_bus 0000:0e: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.330140] pci_bus 0000:0e: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.330142] pci_bus 0000:0e: resource 10 [mem 0xc0000000-0xfebfffff]
[    0.330165] NET: Registered protocol family 2
[    0.330309] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.330420] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.330603] TCP: Hash tables configured (established 32768 bind 32768)
[    0.330635] TCP: reno registered
[    0.330638] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.330672] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.330741] NET: Registered protocol family 1
[    0.330763] pci 0000:00:02.0: Video device with shadowed ROM
[    0.331086] PCI: CLS 64 bytes, default 64
[    0.331109] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.331112] software IO TLB [mem 0xb727c000-0xbb27c000] (64MB) mapped at [ffff8800b727c000-ffff8800bb27bfff]
[    0.331162] Simple Boot Flag at 0x35 set to 0x80
[    0.331723] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
[    0.331771] sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
[    0.331862] sha512_ssse3: Using SSSE3 optimized SHA-512 implementation
[    0.332094] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.332112] Initialise system trusted keyring
[    0.332262] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.333270] zpool: loaded
[    0.333271] zbud: loaded
[    0.333722] ntfs: driver 2.1.31 [Flags: R/O].
[    0.333820] msgmni has been set to 7493
[    0.334427] Key type asymmetric registered
[    0.334429] Asymmetric key parser 'x509' registered
[    0.334456] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.334459] io scheduler noop registered
[    0.334460] io scheduler deadline registered
[    0.334483] io scheduler cfq registered (default)
[    0.334897] intel_idle: MWAIT substates: 0x1120
[    0.334899] intel_idle: v0.4 model 0x25
[    0.334900] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.335370] ACPI: AC Adapter [AC] (on-line)
[    0.335466] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.335690] ACPI: Lid Switch [LID]
[    0.335738] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.335742] ACPI: Sleep Button [SLPB]
[    0.335828] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.335833] ACPI: Power Button [PWRF]
[    0.341640] thermal LNXTHERM:00: registered as thermal_zone0
[    0.341646] ACPI: Thermal Zone [THM0] (51 C)
[    0.341827] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.343142] Non-volatile memory driver v1.3
[    0.343220] Linux agpgart interface v0.103
[    0.343294] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    0.343316] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    0.343870] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    0.344131] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.344156] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    0.344168] [drm] Initialized drm 1.1.0 20060810
[    0.344531] [drm:i915_dump_device_info] i915 device info: gen=5, pciid=0x0046 rev=0x02 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,
[    0.344552] [drm:intel_detect_pch] Found Ibex Peak PCH
[    0.344556] [drm] Memory usable by graphics device = 2048M
[    0.344557] [drm:i915_gem_gtt_init] GMADR size = 256M
[    0.344559] [drm:i915_gem_gtt_init] GTT stolen size = 32M
[    0.344560] [drm:i915_gem_gtt_init] ppgtt mode: 0
[    0.344561] [drm] Replacing VGA console driver
[    0.345235] Console: switching to colour dummy device 80x25
[    0.347925] [drm:intel_opregion_setup] graphic opregion physical addr: 0xbb77f018
[    0.347933] [drm:intel_opregion_setup] Public ACPI methods supported
[    0.347934] [drm:intel_opregion_setup] SWSCI supported
[    0.353360] [drm:swsci_setup] SWSCI GBDA callbacks 00000483, SBCB callbacks 00000203
[    0.353365] [drm:intel_opregion_setup] ASLE supported
[    0.353438] i915 0000:00:02.0: irq 24 for MSI/MSI-X
[    0.353453] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.353456] [drm] Driver supports precise vblank timestamp query.
[    0.353460] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
[    0.353465] [drm:validate_vbt] Using VBT from OpRegion: $VBT IRONLAKE-MOBILEd
[    0.353471] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[    0.353475] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
[    0.353479] [drm:parse_lfp_panel_data] DRRS supported mode is static
[    0.353487] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[    0.353494] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 0 69300 1280 1328 1360 1403 800 803 809 821 0x8 0xa
[    0.353499] [drm:parse_lfp_panel_data] VBT initial LVDS value 300300
[    0.353505] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 625 Hz, active high, min brightness 4, level 255
[    0.353511] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[    0.353518] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[    0.353523] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[    0.353527] [drm:parse_driver_features] DRRS State Enabled:1
[    0.353547] [drm:intel_dsm_pci_probe] no _DSM method for intel device
[    0.353559] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at be000000
[    0.353566] [drm:intel_display_power_get] enabling always-on
[    0.353686] [drm:intel_print_wm_latency] Primary WM0 latency 7 (0.7 usec)
[    0.353691] [drm:intel_print_wm_latency] Primary WM1 latency 10 (5.0 usec)
[    0.353694] [drm:intel_print_wm_latency] Primary WM2 latency 34 (17.0 usec)
[    0.353698] [drm:intel_print_wm_latency] Sprite WM0 latency 13 (1.3 usec)
[    0.353702] [drm:intel_print_wm_latency] Sprite WM1 latency 10 (5.0 usec)
[    0.353705] [drm:intel_print_wm_latency] Sprite WM2 latency 34 (17.0 usec)
[    0.353709] [drm:intel_print_wm_latency] Cursor WM0 latency 13 (1.3 usec)
[    0.353712] [drm:intel_print_wm_latency] Cursor WM1 latency 10 (5.0 usec)
[    0.353716] [drm:intel_print_wm_latency] Cursor WM2 latency 34 (17.0 usec)
[    0.353722] [drm:intel_modeset_init] 2 display pipes available.
[    0.353744] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.362344] ACPI: Battery Slot [BAT0] (battery present)
[    0.367166] [drm:intel_lvds_init] using preferred mode from EDID: 
[    0.367175] [drm:drm_mode_debug_printmodeline] Modeline 17:"1280x800" 60 69300 1280 1328 1360 1403 800 803 809 821 0x48 0xa
[    0.367184] [drm:intel_lvds_init] detected single-link lvds configuration
[    0.367285] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 784/1562, sysfs interface registered
[    0.367362] [drm:intel_crt_reset] pch crt adpa set to 0xf40000
[    0.367436] [drm:intel_dp_init_connector] Adding DP connector on port C
[    0.367479] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1
[    0.367543] [drm:ironlake_init_pch_refclk] has_panel 1 has_lvds 1 has_ck505 0
[    0.367974] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: enabled
[    0.367978] [drm:intel_modeset_readout_hw_state] [CRTC:12] hw state readout: disabled
[    0.367986] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: refcount 1, on 1
[    0.367994] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: refcount 0, on 0
[    0.368002] [drm:intel_modeset_readout_hw_state] [ENCODER:15:LVDS-15] hw state readout: enabled, pipe A
[    0.368008] [drm:intel_modeset_readout_hw_state] [ENCODER:23:DAC-23] hw state readout: disabled, pipe A
[    0.368014] [drm:intel_modeset_readout_hw_state] [ENCODER:24:TMDS-24] hw state readout: disabled, pipe A
[    0.368019] [drm:intel_modeset_readout_hw_state] [ENCODER:29:TMDS-29] hw state readout: disabled, pipe A
[    0.368025] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:LVDS-1] hw state readout: enabled
[    0.368030] [drm:intel_modeset_readout_hw_state] [CONNECTOR:22:VGA-1] hw state readout: disabled
[    0.368036] [drm:intel_modeset_readout_hw_state] [CONNECTOR:25:HDMI-A-1] hw state readout: disabled
[    0.368041] [drm:intel_modeset_readout_hw_state] [CONNECTOR:30:DP-1] hw state readout: disabled
[    0.368048] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A
[    0.368051] [drm:intel_dump_pipe_config] cpu_transcoder: A
[    0.368054] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0
[    0.368059] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 4, gmch_m: 1211105, gmch_n: 8388608, link_m: 134567, link_n: 524288, tu: 64
[    0.368063] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.368067] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    0.368070] [drm:intel_dump_pipe_config] requested mode:
[    0.368075] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
[    0.368078] [drm:intel_dump_pipe_config] adjusted mode:
[    0.368084] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[    0.368089] [drm:intel_dump_crtc_timings] crtc timings: 69286 1280 1328 1360 1403 800 803 809 821, type: 0x0 flags: 0xa
[    0.368092] [drm:intel_dump_pipe_config] port clock: 69286
[    0.368096] [drm:intel_dump_pipe_config] pipe src size: 720x400
[    0.368099] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    0.368103] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x05000320, enabled
[    0.368106] [drm:intel_dump_pipe_config] ips: 0
[    0.368109] [drm:intel_dump_pipe_config] double wide: 0
[    0.368114] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
[    0.368119] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
[    0.368122] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
[    0.368126] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
[    0.368131] [drm:intel_dump_pipe_config] [CRTC:12][setup_hw_state] config for pipe B
[    0.368133] [drm:intel_dump_pipe_config] cpu_transcoder: B
[    0.368137] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[    0.368141] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.368145] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.368149] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    0.368152] [drm:intel_dump_pipe_config] requested mode:
[    0.368157] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    0.368160] [drm:intel_dump_pipe_config] adjusted mode:
[    0.368165] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    0.368170] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[    0.368173] [drm:intel_dump_pipe_config] port clock: 0
[    0.368176] [drm:intel_dump_pipe_config] pipe src size: 0x0
[    0.368180] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    0.368183] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    0.368186] [drm:intel_dump_pipe_config] ips: 0
[    0.368188] [drm:intel_dump_pipe_config] double wide: 0
[    0.368199] [drm:intel_connector_check_state] [CONNECTOR:14:LVDS-1]
[    0.368208] [drm:check_encoder_state] [ENCODER:15:LVDS-15]
[    0.368213] [drm:check_encoder_state] [ENCODER:23:DAC-23]
[    0.368218] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
[    0.368223] [drm:check_encoder_state] [ENCODER:29:TMDS-29]
[    0.368228] [drm:check_crtc_state] [CRTC:8]
[    0.368251] [drm:check_crtc_state] [CRTC:12]
[    0.368255] [drm:check_shared_dpll_state] PCH DPLL A
[    0.368262] [drm:check_shared_dpll_state] PCH DPLL B
[    0.368276] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=720x400@32, offset=0, pitch 768, size 0x4b000
[    0.368281] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=4b000
[    0.368287] [drm:i915_pages_create_for_stolen] offset=0x0, size=307200
[    0.368295] [drm:intel_alloc_plane_obj] plane fb obj ffff8800b6c28000
[    0.368301] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 4b000
[    0.368305] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [4b000, 7ffff000]
[    0.374359] [drm:i915_gem_context_init] fake context support initialized
[    0.374394] [drm:init_status_page] render ring hws offset: 0x0004c000
[    0.374398] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
[    0.374403] [drm:i915_pages_create_for_stolen] offset=0x4b000, size=131072
[    0.374443] [drm:intel_init_pipe_control] render ring pipe control offset: 0x0006f000
[    0.374453] [drm:init_status_page] bsd ring hws offset: 0x00070000
[    0.374456] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
[    0.374460] [drm:i915_pages_create_for_stolen] offset=0x6b000, size=131072
[    0.374515] [drm:ironlake_enable_drps] fmax: 0, fmin: 7, fstart: 5
[    0.375670] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:LVDS-1]
[    0.375677] [drm:intel_lvds_detect] [CONNECTOR:14:LVDS-1]
[    0.375695] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:LVDS-1] probed modes :
[    0.375702] [drm:drm_mode_debug_printmodeline] Modeline 17:"1280x800" 60 69300 1280 1328 1360 1403 800 803 809 821 0x48 0xa
[    0.375708] [drm:drm_mode_debug_printmodeline] Modeline 18:"1280x800" 50 57590 1280 1328 1360 1403 800 803 809 821 0x40 0xa
[    0.375712] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:VGA-1]
[    0.375717] [drm:intel_crt_detect] [CONNECTOR:22:VGA-1] force=1
[    0.375725] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
[    0.379143] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    0.379319] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    0.379397] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
[    0.380862] loop: module loaded
[    0.380965] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102f conflicts with OpRegion 0x0000000000001000-0x000000000000107f (\_SB_.PCI0.LPC_.PMIO) (20140926/utaddress-258)
[    0.380975] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.380981] ACPI Warning: SystemIO range 0x00000000000011c0-0x00000000000011cf conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20140926/utaddress-258)
[    0.380989] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.380992] ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20140926/utaddress-258)
[    0.380999] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.381002] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20140926/utaddress-258)
[    0.381009] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.381011] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.381119] ahci 0000:00:1f.2: version 3.0
[    0.381325] ahci 0000:00:1f.2: irq 25 for MSI/MSI-X
[    0.381371] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.381426] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x31 impl SATA mode
[    0.381434] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    0.385393] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[    0.385400] [drm:intel_crt_detect] CRT not detected via hotplug
[    0.385602] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[    0.385609] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[    0.385612] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    0.385616] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[    0.386014] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[    0.386018] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[    0.386021] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[    0.386026] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:VGA-1] disconnected
[    0.386031] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-1]
[    0.386034] [drm:intel_hdmi_detect] [CONNECTOR:25:HDMI-A-1]
[    0.386222] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    0.386227] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[    0.386231] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-1] disconnected
[    0.386235] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:DP-1]
[    0.386238] [drm:intel_dp_detect] [CONNECTOR:30:DP-1]
[    0.386244] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:DP-1] disconnected
[    0.386247] [drm:drm_setup_crtcs] 
[    0.386252] [drm:drm_enable_connectors] connector 14 enabled? yes
[    0.386255] [drm:drm_enable_connectors] connector 22 enabled? no
[    0.386258] [drm:drm_enable_connectors] connector 25 enabled? no
[    0.386261] [drm:drm_enable_connectors] connector 30 enabled? no
[    0.386265] [drm:intel_fb_initial_config] looking for cmdline mode on connector LVDS-1
[    0.386269] [drm:intel_fb_initial_config] looking for preferred mode on connector LVDS-1
[    0.386274] [drm:intel_fb_initial_config] connector LVDS-1 on pipe A [CRTC:8]: 1280x800
[    0.386277] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
[    0.386280] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
[    0.386283] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
[    0.386287] [drm:drm_setup_crtcs] desired mode 1280x800 set on crtc 8
[    0.386293] [drm:intelfb_create] no BIOS fb, allocating a new one
[    0.386296] [drm:i915_gem_object_create_stolen] creating stolen object: size=3e8000
[    0.386321] [drm:i915_pages_create_for_stolen] offset=0x8b000, size=4096000
[    0.386493] scsi host0: ahci
[    0.386783] scsi host1: ahci
[    0.386997] scsi host2: ahci
[    0.387213] scsi host3: ahci
[    0.387452] scsi host4: ahci
[    0.387662] scsi host5: ahci
[    0.387694] [drm:intelfb_create] allocated 1280x800 fb: 0x00092000, bo ffff880132e3e000
[    0.387800] ata1: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727100 irq 25
[    0.387804] ata2: DUMMY
[    0.387806] ata3: DUMMY
[    0.387809] ata4: DUMMY
[    0.387813] ata5: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727300 irq 25
[    0.387818] ata6: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727380 irq 25
[    0.387853] fbcon: inteldrmfb (fb0) is primary device
[    0.387947] [drm:intel_crtc_set_config] [CRTC:8] [FB:33] #connectors=1 (x y) (0 0)
[    0.387950] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
[    0.387955] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    0.387959] [drm:drm_mode_debug_printmodeline] Modeline 32:"1280x800" 60 69300 1280 1328 1360 1403 800 803 809 821 0x48 0xa
[    0.387962] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=1
[    0.387965] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
[    0.387969] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    0.387973] [drm:connected_sink_compute_bpp] [CONNECTOR:14:LVDS-1] checking for sink bpp constrains
[    0.387975] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18)
[    0.387981] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1
[    0.387984] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
[    0.387987] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
[    0.387989] [drm:intel_dump_pipe_config] cpu_transcoder: A
[    0.387992] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
[    0.387996] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2422210, gmch_n: 4194304, link_m: 134567, link_n: 524288, tu: 64
[    0.387998] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.388002] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.388003] ehci-pci: EHCI PCI platform driver
[    0.388006] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    0.388008] [drm:intel_dump_pipe_config] requested mode:
[    0.388015] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 60 69300 1280 1328 1360 1403 800 803 809 821 0x48 0xa
[    0.388017] [drm:intel_dump_pipe_config] adjusted mode:
[    0.388023] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 60 69300 1280 1328 1360 1403 800 803 809 821 0x48 0xa
[    0.388028] [drm:intel_dump_crtc_timings] crtc timings: 69300 1280 1328 1360 1403 800 803 809 821, type: 0x48 flags: 0xa
[    0.388030] [drm:intel_dump_pipe_config] port clock: 69300
[    0.388032] [drm:intel_dump_pipe_config] pipe src size: 1280x800
[    0.388034] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    0.388036] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    0.388038] [drm:intel_dump_pipe_config] ips: 0
[    0.388040] [drm:intel_dump_pipe_config] double wide: 0
[    0.388060] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[    0.388212] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.388281] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.388297] ehci-pci 0000:00:1a.0: debug port 2
[    0.392242] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.392256] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf2728000
[    0.397319] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.397355] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.397357] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.397358] usb usb1: Product: EHCI Host Controller
[    0.397359] usb usb1: Manufacturer: Linux 3.18.0-rc4+ ehci_hcd
[    0.397360] usb usb1: SerialNumber: 0000:00:1a.0
[    0.397491] hub 1-0:1.0: USB hub found
[    0.397496] hub 1-0:1.0: 3 ports detected
[    0.397708] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.397762] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.397775] ehci-pci 0000:00:1d.0: debug port 2
[    0.401684] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.401701] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf2728400
[    0.407315] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.407337] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.407339] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.407340] usb usb2: Product: EHCI Host Controller
[    0.407341] usb usb2: Manufacturer: Linux 3.18.0-rc4+ ehci_hcd
[    0.407342] usb usb2: SerialNumber: 0000:00:1d.0
[    0.407589] hub 2-0:1.0: USB hub found
[    0.407600] hub 2-0:1.0: 3 ports detected
[    0.407819] uhci_hcd: USB Universal Host Controller Interface driver
[    0.407888] usbcore: registered new interface driver usb-storage
[    0.407944] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.411323] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.411377] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.411524] mousedev: PS/2 mouse device common for all mice
[    0.411859] I2O subsystem v1.325
[    0.411861] i2o: max drivers = 8
[    0.412038] rtc_cmos 00:02: RTC can wake from S4
[    0.412277] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.412328] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.412343] i2c /dev entries driver
[    0.413053] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    0.413224] uvcvideo: Unable to create debugfs directory
[    0.413248] usbcore: registered new interface driver uvcvideo
[    0.413249] USB Video Class driver (1.1.1)
[    0.413426] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    0.413460] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x1060)
[    0.413687] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    0.413698] iTCO_vendor_support: vendor-support=0
[    0.413754] device-mapper: uevent: version 1.0.3
[    0.413881] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
[    0.413942] usbcore: registered new interface driver usbhid
[    0.413942] usbhid: USB HID core driver
[    0.415483] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    0.415484] thinkpad_acpi: http://ibm-acpi.sf.net/
[    0.415485] thinkpad_acpi: ThinkPad BIOS 6QET69WW (1.39 ), EC 6QHT33WW-1.14
[    0.415487] thinkpad_acpi: Lenovo ThinkPad X201, model 3323L7T
[    0.416084] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.416552] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[    0.416798] thinkpad_acpi: radio switch found; radios are enabled
[    0.417015] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[    0.417190] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    0.417191] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    0.423325] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    0.423476] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    0.425961] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[    0.426178] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[    0.426650] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[    0.427243] snd_hda_intel 0000:00:1b.0: irq 26 for MSI/MSI-X
[    0.427368] Netfilter messages via NETLINK v0.30.
[    0.427370] nfnl_acct: registering with nfnetlink.
[    0.427380] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    0.427465] ctnetlink v0.93: registering with nfnetlink.
[    0.427944] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.428001] arp_tables: (C) 2002 David S. Miller
[    0.428080] TCP: cubic registered
[    0.428081] TCP: veno registered
[    0.428173] NET: Registered protocol family 10
[    0.428468] NET: Registered protocol family 17
[    0.428477] NET: Registered protocol family 15
[    0.429104] Loading compiled-in X.509 certificates
[    0.431756] Loaded X.509 cert 'Magrathea: Glacier signing key: 742c3b2ff369b42635042c8e86f9f2fd95d23252'
[    0.432281] rtc_cmos 00:02: setting system clock to 2014-11-13 21:27:14 UTC (1415914034)
[    0.436866] sound hdaudioC0D0: CX20585: BIOS auto-probing.
[    0.437514] ALSA device list:
[    0.437515]   #29: ThinkPad Console Audio Control at EC reg 0x30, fw 6QHT33WW-1.14
[    0.437517] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[    0.437518] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    0.437520] sound hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[    0.437521] sound hdaudioC0D0:    mono: mono_out=0x0
[    0.437522] sound hdaudioC0D0:    inputs:
[    0.437523] sound hdaudioC0D0:      Internal Mic=0x23
[    0.437524] sound hdaudioC0D0:      Mic=0x1b
[    0.437525] sound hdaudioC0D0:      Dock Mic=0x1a
[    0.438810] sound hdaudioC0D0: Enable sync_write for stable communication
[    0.440514] sound hdaudioC0D3: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[    0.440515] sound hdaudioC0D3:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    0.440517] sound hdaudioC0D3:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    0.440518] sound hdaudioC0D3:    mono: mono_out=0x0
[    0.440519] sound hdaudioC0D3:    dig-out=0x5/0x0
[    0.440519] sound hdaudioC0D3:    inputs:
[    0.689236] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 8
[    0.689243] [drm:intel_disable_shared_dpll] disabling PCH DPLL A
[    0.689660] [drm:intel_update_fbc] no output, disabling
[    0.689673] [drm:ironlake_get_refclk] using SSC reference clock of 120000 kHz
[    0.689722] [drm:intel_get_shared_dpll] CRTC:8 dropping existing PCH DPLL A
[    0.689724] [drm:intel_get_shared_dpll] CRTC:8 using pre-allocated PCH DPLL A
[    0.689726] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
[    0.689729] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A
[    0.690628] [drm:ironlake_fdi_link_train] FDI_RX_IIR 0x700
[    0.690629] [drm:ironlake_fdi_link_train] FDI train 1 done.
[    0.690787] [drm:ironlake_fdi_link_train] FDI_RX_IIR 0x600
[    0.690788] [drm:ironlake_fdi_link_train] FDI train 2 done.
[    0.690790] [drm:ironlake_fdi_link_train] FDI train done
[    0.690792] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0) for crtc 8
[    0.690794] [drm:intel_enable_shared_dpll] enabling PCH DPLL A
[    0.694348] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.695035] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
[    0.695038] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
[    0.695040] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
[    0.695696] ata1.00: ATA-9: M4-CT128M4SSD2, 070H, max UDMA/100
[    0.695700] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.696409] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
[    0.696413] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
[    0.696417] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
[    0.696899] ata1.00: configured for UDMA/100
[    0.699250] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.709240] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.813871] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    0.813875] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.814226] hub 1-1:1.0: USB hub found
[    0.814486] hub 1-1:1.0: 6 ports detected
[    0.823847] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    0.823851] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.824247] hub 2-1:1.0: USB hub found
[    0.824490] hub 2-1:1.0: 8 ports detected
[    0.896174] [drm:intel_panel_enable_backlight] pipe A
[    0.896179] [drm:intel_panel_actually_set_backlight] set backlight PWM = 784
[    0.896191] [drm:ironlake_update_primary_plane] Writing base 00092000 00000000 0 0 5120
[    0.896195] [drm:intel_update_fbc] disabled per chip default
[    0.896202] [drm:intel_connector_check_state] [CONNECTOR:14:LVDS-1]
[    0.896211] [drm:check_encoder_state] [ENCODER:15:LVDS-15]
[    0.896214] [drm:check_encoder_state] [ENCODER:23:DAC-23]
[    0.896217] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
[    0.896220] [drm:check_encoder_state] [ENCODER:29:TMDS-29]
[    0.896223] [drm:check_crtc_state] [CRTC:8]
[    0.896243] [drm:check_crtc_state] [CRTC:12]
[    0.896245] [drm:check_shared_dpll_state] PCH DPLL A
[    0.896250] [drm:check_shared_dpll_state] PCH DPLL B
[    0.896258] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
[    0.896260] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
[    0.896262] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
[    0.896289] [drm:intel_crtc_set_config] [CRTC:8] [FB:33] #connectors=1 (x y) (0 0)
[    0.896291] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[    0.896292] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
[    0.902907] Console: switching to colour frame buffer device 160x50
[    0.902918] [drm:intel_crtc_set_config] [CRTC:8] [FB:33] #connectors=1 (x y) (0 0)
[    0.902921] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[    0.902924] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
[    0.908677] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    0.908679] i915 0000:00:02.0: registered panic notifier
[    0.914516] scsi 0:0:0:0: Direct-Access     ATA      M4-CT128M4SSD2   070H PQ: 0 ANSI: 5
[    0.914695] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    0.914741] sd 0:0:0:0: [sda] Write Protect is off
[    0.914747] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.914761] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.914765] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.917195]  sda: sda1 sda2 sda4 sda5 sda6
[    0.917789] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.090210] usb 1-1.6: new high-speed USB device number 3 using ehci-pci
[    1.181427] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=4816
[    1.181434] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.181439] usb 1-1.6: Product: Integrated Camera
[    1.181443] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    1.182352] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:4816)
[    1.219094] ata5: SATA link down (SStatus 0 SControl 300)
[    1.332990] tsc: Refined TSC clocksource calibration: 2127.996 MHz
[    1.523965] ata6: SATA link down (SStatus 0 SControl 300)
[    1.526900] EXT4-fs (sda4): mounted filesystem with writeback data mode. Opts: data=writeback
[    1.526912] VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
[    1.528454] devtmpfs: mounted
[    1.529913] Freeing unused kernel memory: 768K (ffffffff81a79000 - ffffffff81b39000)
[    1.529917] Write protecting the kernel read-only data: 10240k
[    1.538221] Freeing unused kernel memory: 1852K (ffff880001631000 - ffff880001800000)
[    1.540081] Freeing unused kernel memory: 688K (ffff880001954000 - ffff880001a00000)
[    1.574158] random: systemd urandom read with 22 bits of entropy available
[    1.641521] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    1.683549] EXT4-fs (sda4): re-mounted. Opts: discard
[    1.726069] systemd-journald[127]: Received request to flush runtime journal from PID 1
[    2.049920] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=771/1562
[    2.049927] [drm:intel_panel_actually_set_backlight] set backlight PWM = 784
[    2.050543] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    2.050545] Copyright(c) 2003- 2014 Intel Corporation
[    2.050754] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    2.050892] iwlwifi 0000:02:00.0: irq 27 for MSI/MSI-X
[    2.051393] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    2.051396] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[    2.051580] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    2.051623] e1000e 0000:00:19.0: irq 28 for MSI/MSI-X
[    2.065721] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[    2.065740] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[    2.068185] iwlwifi 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[    2.074084] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    2.074090] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    2.074093] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    2.074096] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[    2.074200] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[    2.092376] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    2.104641] Adding 524284k swap on /dev/sda2.  Priority:-1 extents:1 across:524284k SSFS
[    2.112169] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    2.128708] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[    2.131215] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    2.133047] EXT4-fs (sda5): barriers disabled
[    2.139223] EXT4-fs (sda5): mounted filesystem with writeback data mode. Opts: discard,data=writeback,barrier=0
[    2.233614] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[    2.240575] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
[    2.332804] Switched to clocksource tsc
[    2.447342] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[    2.454007] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
[    2.532211] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    2.532692] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 5c:ff:35:01:7d:ca
[    2.532700] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    2.532782] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[    2.535072] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    2.556317] [drm:intel_crtc_set_config] [CRTC:8] [FB:33] #connectors=1 (x y) (0 0)
[    2.556322] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[    2.556324] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
[    2.891470] cfg80211: Calling CRDA to update world regulatory domain
[    2.934513] cfg80211: Calling CRDA to update world regulatory domain
[    3.023914] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 615624
[    3.023923] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    3.076211] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    5.590968] wlp2s0: authenticate with a4:b1:e9:f3:a4:f9
[    5.590977] wlp2s0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[    5.593499] wlp2s0: send auth to a4:b1:e9:f3:a4:f9 (try 1/3)
[    5.598212] wlp2s0: authenticated
[    5.598348] wlp2s0: waiting for beacon from a4:b1:e9:f3:a4:f9
[    5.659221] wlp2s0: associate with a4:b1:e9:f3:a4:f9 (try 1/3)
[    5.662692] wlp2s0: RX AssocResp from a4:b1:e9:f3:a4:f9 (capab=0x411 status=0 aid=3)
[    5.666147] wlp2s0: associated
[    5.666189] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[    5.831816] random: nonblocking pool is initialized
[    7.053741] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/serio2/input/input8
