[    0.000000] Linux version 3.18.0-rc4+ (eb@blackout) (gcc version 4.8.3 (CRUX) ) #2 SMP PREEMPT Thu Nov 13 22:28:45 CET 2014
[    0.000000] Command line: BOOT_IMAGE=/vmlinuz-git root=/dev/sda4 rootfstype=ext4 rootflags=data=writeback ro quiet drm.debug=0xe
[    0.000000] KERNEL supported cpus:
[    0.000000]   Intel GenuineIntel
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000dc000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bb27bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb27c000-0x00000000bb281fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb282000-0x00000000bb35efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb35f000-0x00000000bb370fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb371000-0x00000000bb3f1fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb3f2000-0x00000000bb40efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb40f000-0x00000000bb46efff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb46f000-0x00000000bb667fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb668000-0x00000000bb6e7fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb6e8000-0x00000000bb70efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb70f000-0x00000000bb716fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb717000-0x00000000bb71efff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bb71f000-0x00000000bb76bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb76c000-0x00000000bb777fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb778000-0x00000000bb77afff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bb77b000-0x00000000bb78afff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb78b000-0x00000000bb78bfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bb78c000-0x00000000bb79efff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bb79f000-0x00000000bb7fefff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bb7ff000-0x00000000bb7fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bb800000-0x00000000bfffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000feaff000-0x00000000feafffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000137ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] SMBIOS 2.6 present.
[    0.000000] DMI: LENOVO 3323L7T/3323L7T, BIOS 6QET69WW (1.39 ) 04/26/2012
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x138000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: uncachable
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 disabled
[    0.000000]   1 base 000000000 mask F80000000 write-back
[    0.000000]   2 base 080000000 mask FC0000000 write-back
[    0.000000]   3 base 100000000 mask FC0000000 write-back
[    0.000000]   4 base 138000000 mask FF8000000 uncachable
[    0.000000]   5 base 0BC000000 mask FFC000000 uncachable
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[    0.000000] original variable MTRRs
[    0.000000] reg 1, base: 0GB, range: 2GB, type WB
[    0.000000] reg 2, base: 2GB, range: 1GB, type WB
[    0.000000] reg 3, base: 4GB, range: 1GB, type WB
[    0.000000] reg 4, base: 4992MB, range: 128MB, type UC
[    0.000000] reg 5, base: 3008MB, range: 64MB, type UC
[    0.000000] total RAM covered: 3904M
[    0.000000] Found optimal setting for mtrr clean up
[    0.000000]  gran_size: 64K 	chunk_size: 256M 	num_reg: 5  	lose cover RAM: 0G
[    0.000000] New variable MTRRs
[    0.000000] reg 0, base: 0GB, range: 2GB, type WB
[    0.000000] reg 1, base: 2GB, range: 1GB, type WB
[    0.000000] reg 2, base: 3008MB, range: 64MB, type UC
[    0.000000] reg 3, base: 4GB, range: 1GB, type WB
[    0.000000] reg 4, base: 4992MB, range: 128MB, type UC
[    0.000000] e820: update [mem 0xbc000000-0xffffffff] usable ==> reserved
[    0.000000] e820: last_pfn = 0xbb800 max_arch_pfn = 0x400000000
[    0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[    0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[    0.000000]  [mem 0x00000000-0x000fffff] page 4k
[    0.000000] BRK [0x01be6000, 0x01be6fff] PGTABLE
[    0.000000] BRK [0x01be7000, 0x01be7fff] PGTABLE
[    0.000000] BRK [0x01be8000, 0x01be8fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x137e00000-0x137ffffff]
[    0.000000]  [mem 0x137e00000-0x137ffffff] page 2M
[    0.000000] BRK [0x01be9000, 0x01be9fff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0x134000000-0x137dfffff]
[    0.000000]  [mem 0x134000000-0x137dfffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x100000000-0x133ffffff]
[    0.000000]  [mem 0x100000000-0x133ffffff] page 2M
[    0.000000] init_memory_mapping: [mem 0x00100000-0xbb27bfff]
[    0.000000]  [mem 0x00100000-0x001fffff] page 4k
[    0.000000]  [mem 0x00200000-0xbb1fffff] page 2M
[    0.000000]  [mem 0xbb200000-0xbb27bfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbb282000-0xbb35efff]
[    0.000000]  [mem 0xbb282000-0xbb35efff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbb40f000-0xbb46efff]
[    0.000000]  [mem 0xbb40f000-0xbb46efff] page 4k
[    0.000000] BRK [0x01bea000, 0x01beafff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbb70f000-0xbb716fff]
[    0.000000]  [mem 0xbb70f000-0xbb716fff] page 4k
[    0.000000] BRK [0x01beb000, 0x01bebfff] PGTABLE
[    0.000000] init_memory_mapping: [mem 0xbb71f000-0xbb76bfff]
[    0.000000]  [mem 0xbb71f000-0xbb76bfff] page 4k
[    0.000000] init_memory_mapping: [mem 0xbb7ff000-0xbb7fffff]
[    0.000000]  [mem 0xbb7ff000-0xbb7fffff] page 4k
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F68E0 000024 (v02 LENOVO)
[    0.000000] ACPI: XSDT 0x00000000BB7F0826 000094 (v01 LENOVO TP-6Q    00001390  LTP 00000000)
[    0.000000] ACPI: FACP 0x00000000BB7F0900 0000F4 (v04 LENOVO TP-6Q    00001390 LNVO 00000001)
[    0.000000] ACPI BIOS Warning (bug): 32/64X length mismatch in FADT/Pm1aControlBlock: 16/32 (20140926/tbfadt-618)
[    0.000000] ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20140926/tbfadt-699)
[    0.000000] ACPI: DSDT 0x00000000BB7F0C6B 00DE70 (v01 LENOVO TP-6Q    00001390 MSFT 03000001)
[    0.000000] ACPI: FACS 0x00000000BB6E7000 000040
[    0.000000] ACPI: SSDT 0x00000000BB7F0AB4 0001B7 (v01 LENOVO TP-6Q    00001390 MSFT 03000001)
[    0.000000] ACPI: ECDT 0x00000000BB7FEADB 000052 (v01 LENOVO TP-6Q    00001390 LNVO 00000001)
[    0.000000] ACPI: APIC 0x00000000BB7FEB2D 000084 (v01 LENOVO TP-6Q    00001390 LNVO 00000001)
[    0.000000] ACPI: MCFG 0x00000000BB7FEBE9 00003C (v01 LENOVO TP-6Q    00001390 LNVO 00000001)
[    0.000000] ACPI: HPET 0x00000000BB7FEC25 000038 (v01 LENOVO TP-6Q    00001390 LNVO 00000001)
[    0.000000] ACPI: ASF! 0x00000000BB7FEDBE 0000A4 (v16 LENOVO TP-6Q    00001390 PTL  00000001)
[    0.000000] ACPI: SLIC 0x00000000BB7FEE62 000176 (v01 LENOVO TP-6Q    00001390  LTP 00000000)
[    0.000000] ACPI: BOOT 0x00000000BB7FEFD8 000028 (v01 LENOVO TP-6Q    00001390  LTP 00000001)
[    0.000000] ACPI: SSDT 0x00000000BB6E590A 00085B (v01 LENOVO TP-6Q    00001390 INTL 20050513)
[    0.000000] ACPI: TCPA 0x00000000BB78B000 000032 (v02 PTL     CRESTLN 06040000      00005A52)
[    0.000000] ACPI: SSDT 0x00000000BB77A000 0009F1 (v01 PmRef  CpuPm    00003000 INTL 20050513)
[    0.000000] ACPI: SSDT 0x00000000BB779000 000259 (v01 PmRef  Cpu0Tst  00003000 INTL 20050513)
[    0.000000] ACPI: SSDT 0x00000000BB778000 00049F (v01 PmRef  ApTst    00003000 INTL 20050513)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000]  [ffffea0000000000-ffffea0004dfffff] PMD -> [ffff880133800000-ffff8801375fffff] on node 0
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x00001000-0x00ffffff]
[    0.000000]   DMA32    [mem 0x01000000-0xffffffff]
[    0.000000]   Normal   [mem 0x100000000-0x137ffffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x00001000-0x0009dfff]
[    0.000000]   node   0: [mem 0x00100000-0xbb27bfff]
[    0.000000]   node   0: [mem 0xbb282000-0xbb35efff]
[    0.000000]   node   0: [mem 0xbb40f000-0xbb46efff]
[    0.000000]   node   0: [mem 0xbb70f000-0xbb716fff]
[    0.000000]   node   0: [mem 0xbb71f000-0xbb76bfff]
[    0.000000]   node   0: [mem 0xbb7ff000-0xbb7fffff]
[    0.000000]   node   0: [mem 0x100000000-0x137ffffff]
[    0.000000] Initmem setup node 0 [mem 0x00001000-0x137ffffff]
[    0.000000] On node 0 totalpages: 996268
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3997 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 11921 pages used for memmap
[    0.000000]   DMA32 zone: 762895 pages, LIFO batch:31
[    0.000000]   Normal zone: 3584 pages used for memmap
[    0.000000]   Normal zone: 229376 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics stolen memory at 0xbe000000-0xbfffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1008
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
[    0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x05] enabled)
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
[    0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[    0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] smpboot: Allowing 4 CPUs, 0 hotplug CPUs
[    0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[    0.000000] setup_percpu: NR_CPUS:4 nr_cpumask_bits:4 nr_cpu_ids:4 nr_node_ids:1
[    0.000000] PERCPU: Embedded 28 pages/cpu @ffff880137c00000 s75840 r8192 d30656 u524288
[    0.000000] pcpu-alloc: s75840 r8192 d30656 u524288 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1 2 3 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 980678
[    0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-git root=/dev/sda4 rootfstype=ext4 rootflags=data=writeback ro quiet drm.debug=0xe
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[    0.000000] Memory: 3836552K/3985072K available (6326K kernel code, 477K rwdata, 1360K rodata, 768K init, 664K bss, 148520K reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000] 	Dump stacks of tasks blocking RCU-preempt GP.
[    0.000000] NR_IRQS:4352 nr_irqs:456 0
[    0.000000] 	Offload RCU callbacks from all CPUs
[    0.000000] 	Offload RCU callbacks from CPUs: 0-3.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] hpet clockevent registered
[    0.000000] tsc: Fast TSC calibration using PIT
[    0.000000] tsc: Detected 2127.858 MHz processor
[    0.000029] Calibrating delay loop (skipped), value calculated using timer frequency.. 4255.71 BogoMIPS (lpj=2127858)
[    0.000032] pid_max: default: 32768 minimum: 301
[    0.000037] ACPI: Core revision 20140926
[    0.010800] ACPI: All ACPI Tables successfully acquired
[    0.019517] Security Framework initialized
[    0.019520] Yama: becoming mindful.
[    0.019534] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.019536] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[    0.019735] CPU: Physical Processor ID: 0
[    0.019737] CPU: Processor Core ID: 0
[    0.019742] mce: CPU supports 9 MCE banks
[    0.019752] CPU0: Thermal monitoring enabled (TM1)
[    0.019762] Last level iTLB entries: 4KB 512, 2MB 7, 4MB 7
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32, 1GB 0
[    0.019899] Freeing SMP alternatives memory: 24K (ffffffff81b39000 - ffffffff81b3f000)
[    0.020462] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[    0.030460] smpboot: CPU0: Intel(R) Core(TM) i3 CPU       M 330  @ 2.13GHz (fam: 06, model: 25, stepping: 02)
[    0.131932] Performance Events: PEBS fmt1+, 16-deep LBR, Westmere events, Intel PMU driver.
[    0.131952] perf_event_intel: CPUID marked event: 'bus cycles' unavailable
[    0.131955] ... version:                3
[    0.131956] ... bit width:              48
[    0.131957] ... generic registers:      4
[    0.131958] ... value mask:             0000ffffffffffff
[    0.131959] ... max period:             000000007fffffff
[    0.131960] ... fixed-purpose events:   3
[    0.131961] ... event mask:             000000070000000f
[    0.140045] x86: Booting SMP configuration:
[    0.140047] .... node  #0, CPUs:      #1 #2 #3
[    0.183279] x86: Booted up 1 node, 4 CPUs
[    0.183284] smpboot: Total of 4 processors activated (17022.86 BogoMIPS)
[    0.185420] devtmpfs: initialized
[    0.185641] PM: Registering ACPI NVS region [mem 0xbb371000-0xbb3f1fff] (528384 bytes)
[    0.185649] PM: Registering ACPI NVS region [mem 0xbb668000-0xbb6e7fff] (524288 bytes)
[    0.185658] PM: Registering ACPI NVS region [mem 0xbb76c000-0xbb777fff] (49152 bytes)
[    0.185659] PM: Registering ACPI NVS region [mem 0xbb77b000-0xbb78afff] (65536 bytes)
[    0.185662] PM: Registering ACPI NVS region [mem 0xbb78c000-0xbb79efff] (77824 bytes)
[    0.185856] NET: Registered protocol family 16
[    0.188918] cpuidle: using governor ladder
[    0.191914] cpuidle: using governor menu
[    0.191998] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.192000] ACPI: bus type PCI registered
[    0.192045] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[    0.192048] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[    0.192322] PCI: Using configuration type 1 for base access
[    0.197169] ACPI: Added _OSI(Module Device)
[    0.197171] ACPI: Added _OSI(Processor Device)
[    0.197173] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.197174] ACPI: Added _OSI(Processor Aggregator Device)
[    0.198618] ACPI : EC: EC description table is found, configuring boot EC
[    0.202764] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[    0.281422] ACPI: Dynamic OEM Table Load:
[    0.281429] ACPI: SSDT 0xFFFF880133780000 00042D (v01 PmRef  Cpu0Ist  00003000 INTL 20050513)
[    0.281927] ACPI: Dynamic OEM Table Load:
[    0.281933] ACPI: SSDT 0xFFFF880133780800 0006B2 (v01 PmRef  Cpu0Cst  00003001 INTL 20050513)
[    0.288122] ACPI: Dynamic OEM Table Load:
[    0.288128] ACPI: SSDT 0xFFFF880133735800 000303 (v01 PmRef  ApIst    00003000 INTL 20050513)
[    0.290987] ACPI: Dynamic OEM Table Load:
[    0.290992] ACPI: SSDT 0xFFFF880133725400 000119 (v01 PmRef  ApCst    00003000 INTL 20050513)
[    0.295493] ACPI: Interpreter enabled
[    0.295500] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140926/hwxface-580)
[    0.295505] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140926/hwxface-580)
[    0.295516] ACPI: (supports S0 S3 S5)
[    0.295518] ACPI: Using IOAPIC for interrupt routing
[    0.295542] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.299198] ACPI: Power Resource [PUBS] (on)
[    0.302710] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11)
[    0.302796] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 10 *11)
[    0.302864] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.302948] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11)
[    0.303031] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 *11)
[    0.303096] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.303162] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11) *0, disabled.
[    0.303249] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 *11)
[    0.303329] ACPI: PCI Root Bridge [UNCR] (domain 0000 [bus ff])
[    0.303334] acpi PNP0A03:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.303339] acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[    0.303369] PCI host bridge to bus 0000:ff
[    0.303372] pci_bus 0000:ff: root bus resource [bus ff]
[    0.303379] pci 0000:ff:00.0: [8086:2c62] type 00 class 0x060000
[    0.303433] pci 0000:ff:00.1: [8086:2d01] type 00 class 0x060000
[    0.303484] pci 0000:ff:02.0: [8086:2d10] type 00 class 0x060000
[    0.303529] pci 0000:ff:02.1: [8086:2d11] type 00 class 0x060000
[    0.303572] pci 0000:ff:02.2: [8086:2d12] type 00 class 0x060000
[    0.303616] pci 0000:ff:02.3: [8086:2d13] type 00 class 0x060000
[    0.303668] pci_bus 0000:ff: on NUMA node 0
[    0.303690] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
[    0.303693] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.303865] acpi PNP0A08:00: _OSC: platform does not support [PCIeCapability]
[    0.303942] acpi PNP0A08:00: _OSC: not requesting control; platform does not support [PCIeCapability]
[    0.303945] acpi PNP0A08:00: _OSC: OS requested [PCIeHotplug PME AER PCIeCapability]
[    0.303947] acpi PNP0A08:00: _OSC: platform willing to grant [PCIeHotplug PME AER]
[    0.303949] acpi PNP0A08:00: _OSC failed (AE_SUPPORT); disabling ASPM
[    0.303998] PCI host bridge to bus 0000:00
[    0.304001] pci_bus 0000:00: root bus resource [bus 00-fe]
[    0.304003] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
[    0.304005] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff]
[    0.304006] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[    0.304008] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[    0.304010] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[    0.304012] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[    0.304014] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xfebfffff]
[    0.304021] pci 0000:00:00.0: [8086:0044] type 00 class 0x060000
[    0.304102] pci 0000:00:02.0: [8086:0046] type 00 class 0x030000
[    0.304114] pci 0000:00:02.0: reg 0x10: [mem 0xf2000000-0xf23fffff 64bit]
[    0.304121] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[    0.304126] pci 0000:00:02.0: reg 0x20: [io  0x1800-0x1807]
[    0.304243] pci 0000:00:16.0: [8086:3b64] type 00 class 0x078000
[    0.304274] pci 0000:00:16.0: reg 0x10: [mem 0xf2727800-0xf272780f 64bit]
[    0.304374] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[    0.304463] pci 0000:00:19.0: [8086:10ea] type 00 class 0x020000
[    0.304489] pci 0000:00:19.0: reg 0x10: [mem 0xf2500000-0xf251ffff]
[    0.304501] pci 0000:00:19.0: reg 0x14: [mem 0xf2525000-0xf2525fff]
[    0.304514] pci 0000:00:19.0: reg 0x18: [io  0x1820-0x183f]
[    0.304607] pci 0000:00:19.0: PME# supported from D0 D3hot D3cold
[    0.304645] pci 0000:00:19.0: System wakeup disabled by ACPI
[    0.304694] pci 0000:00:1a.0: [8086:3b3c] type 00 class 0x0c0320
[    0.304720] pci 0000:00:1a.0: reg 0x10: [mem 0xf2728000-0xf27283ff]
[    0.304837] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[    0.304876] pci 0000:00:1a.0: System wakeup disabled by ACPI
[    0.304925] pci 0000:00:1b.0: [8086:3b56] type 00 class 0x040300
[    0.304948] pci 0000:00:1b.0: reg 0x10: [mem 0xf2520000-0xf2523fff 64bit]
[    0.305059] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[    0.305102] pci 0000:00:1b.0: System wakeup disabled by ACPI
[    0.305146] pci 0000:00:1c.0: [8086:3b42] type 01 class 0x060400
[    0.305262] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.305303] pci 0000:00:1c.0: System wakeup disabled by ACPI
[    0.305349] pci 0000:00:1c.3: [8086:3b48] type 01 class 0x060400
[    0.305461] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[    0.305500] pci 0000:00:1c.3: System wakeup disabled by ACPI
[    0.305543] pci 0000:00:1c.4: [8086:3b4a] type 01 class 0x060400
[    0.305654] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
[    0.305695] pci 0000:00:1c.4: System wakeup disabled by ACPI
[    0.305746] pci 0000:00:1d.0: [8086:3b34] type 00 class 0x0c0320
[    0.305773] pci 0000:00:1d.0: reg 0x10: [mem 0xf2728400-0xf27287ff]
[    0.305888] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.305926] pci 0000:00:1d.0: System wakeup disabled by ACPI
[    0.305968] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[    0.306102] pci 0000:00:1f.0: [8086:3b07] type 00 class 0x060100
[    0.306283] pci 0000:00:1f.2: [8086:3b2f] type 00 class 0x010601
[    0.306312] pci 0000:00:1f.2: reg 0x10: [io  0x1860-0x1867]
[    0.306323] pci 0000:00:1f.2: reg 0x14: [io  0x1814-0x1817]
[    0.306334] pci 0000:00:1f.2: reg 0x18: [io  0x1818-0x181f]
[    0.306346] pci 0000:00:1f.2: reg 0x1c: [io  0x1810-0x1813]
[    0.306357] pci 0000:00:1f.2: reg 0x20: [io  0x1840-0x185f]
[    0.306368] pci 0000:00:1f.2: reg 0x24: [mem 0xf2727000-0xf27277ff]
[    0.306439] pci 0000:00:1f.2: PME# supported from D3hot
[    0.306514] pci 0000:00:1f.3: [8086:3b30] type 00 class 0x0c0500
[    0.306537] pci 0000:00:1f.3: reg 0x10: [mem 0xf2728800-0xf27288ff 64bit]
[    0.306568] pci 0000:00:1f.3: reg 0x20: [io  0x1880-0x189f]
[    0.306662] pci 0000:00:1f.6: [8086:3b32] type 00 class 0x118000
[    0.306690] pci 0000:00:1f.6: reg 0x10: [mem 0xf2526000-0xf2526fff 64bit]
[    0.306901] pci 0000:00:1c.0: PCI bridge to [bus 0d]
[    0.306980] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.306985] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.306990] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.306997] pci 0000:00:1c.3:   bridge window [mem 0xf2800000-0xf28fffff 64bit pref]
[    0.307162] pci 0000:02:00.0: [8086:4239] type 00 class 0x028000
[    0.307254] pci 0000:02:00.0: reg 0x10: [mem 0xf2400000-0xf2401fff 64bit]
[    0.307502] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
[    0.307712] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.307719] pci 0000:00:1c.4:   bridge window [mem 0xf2400000-0xf24fffff]
[    0.307807] pci 0000:00:1e.0: PCI bridge to [bus 0e] (subtractive decode)
[    0.307820] pci 0000:00:1e.0:   bridge window [io  0x0000-0x0cf7] (subtractive decode)
[    0.307822] pci 0000:00:1e.0:   bridge window [io  0x0d00-0xffff] (subtractive decode)
[    0.307824] pci 0000:00:1e.0:   bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[    0.307826] pci 0000:00:1e.0:   bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[    0.307828] pci 0000:00:1e.0:   bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[    0.307830] pci 0000:00:1e.0:   bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[    0.307832] pci 0000:00:1e.0:   bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[    0.307889] pci_bus 0000:00: on NUMA node 0
[    0.308996] ACPI: Enabled 3 GPEs in block 00 to 3F
[    0.309068] ACPI : EC: GPE = 0x11, I/O: command/status = 0x66, data = 0x62
[    0.309143] vgaarb: setting as boot device: PCI:0000:00:02.0
[    0.309146] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[    0.309149] vgaarb: loaded
[    0.309150] vgaarb: bridge control possible 0000:00:02.0
[    0.309219] SCSI subsystem initialized
[    0.309230] libata version 3.00 loaded.
[    0.309232] ACPI: bus type USB registered
[    0.309252] usbcore: registered new interface driver usbfs
[    0.309261] usbcore: registered new interface driver hub
[    0.309285] usbcore: registered new device driver usb
[    0.309300] Linux video capture interface: v2.00
[    0.309309] pps_core: LinuxPPS API ver. 1 registered
[    0.309310] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.309313] PTP clock support registered
[    0.309333] Advanced Linux Sound Architecture Driver Initialized.
[    0.309335] PCI: Using ACPI for IRQ routing
[    0.319322] PCI: pci_cache_line_size set to 64 bytes
[    0.319428] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
[    0.319430] e820: reserve RAM buffer [mem 0xbb27c000-0xbbffffff]
[    0.319433] e820: reserve RAM buffer [mem 0xbb35f000-0xbbffffff]
[    0.319436] e820: reserve RAM buffer [mem 0xbb46f000-0xbbffffff]
[    0.319438] e820: reserve RAM buffer [mem 0xbb717000-0xbbffffff]
[    0.319440] e820: reserve RAM buffer [mem 0xbb76c000-0xbbffffff]
[    0.319442] e820: reserve RAM buffer [mem 0xbb800000-0xbbffffff]
[    0.319626] cfg80211: Calling CRDA to update world regulatory domain
[    0.319717] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.319723] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[    0.321749] Switched to clocksource hpet
[    0.321803] pnp: PnP ACPI init
[    0.322429] system 00:00: [mem 0x00000000-0x0009ffff] could not be reserved
[    0.322432] system 00:00: [mem 0x000c0000-0x000c3fff] could not be reserved
[    0.322435] system 00:00: [mem 0x000c4000-0x000c7fff] could not be reserved
[    0.322437] system 00:00: [mem 0x000c8000-0x000cbfff] has been reserved
[    0.322439] system 00:00: [mem 0x000cc000-0x000cffff] has been reserved
[    0.322441] system 00:00: [mem 0x000dc000-0x000dffff] could not be reserved
[    0.322443] system 00:00: [mem 0x000e0000-0x000e3fff] could not be reserved
[    0.322445] system 00:00: [mem 0x000e4000-0x000e7fff] could not be reserved
[    0.322447] system 00:00: [mem 0x000e8000-0x000ebfff] could not be reserved
[    0.322449] system 00:00: [mem 0x000ec000-0x000effff] could not be reserved
[    0.322452] system 00:00: [mem 0x000f0000-0x000fffff] could not be reserved
[    0.322454] system 00:00: [mem 0x00100000-0xbfffffff] could not be reserved
[    0.322456] system 00:00: [mem 0xfec00000-0xfed3ffff] could not be reserved
[    0.322458] system 00:00: [mem 0xfed4c000-0xffffffff] could not be reserved
[    0.322461] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[    0.322798] system 00:01: [io  0x164e-0x164f] has been reserved
[    0.322801] system 00:01: [io  0x1000-0x107f] could not be reserved
[    0.322803] system 00:01: [io  0x1180-0x11ff] has been reserved
[    0.322806] system 00:01: [io  0x0800-0x080f] has been reserved
[    0.322808] system 00:01: [io  0x15e0-0x15ef] has been reserved
[    0.322810] system 00:01: [io  0x1600-0x1641] has been reserved
[    0.322812] system 00:01: [io  0x1644-0x167f] could not be reserved
[    0.322815] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
[    0.322817] system 00:01: [mem 0xfeaff000-0xfeafffff] has been reserved
[    0.322819] system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
[    0.322821] system 00:01: [mem 0xfed10000-0xfed13fff] has been reserved
[    0.322823] system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.322826] system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.322828] system 00:01: [mem 0xfed45000-0xfed4bfff] has been reserved
[    0.322831] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.322882] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.322908] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[    0.322933] pnp 00:04: Plug and Play ACPI device, IDs LEN0018 PNP0f13 (active)
[    0.323211] pnp 00:05: Plug and Play ACPI device, IDs SMO1200 PNP0c31 (active)
[    0.323635] pnp: PnP ACPI: found 6 devices
[    0.330477] pci 0000:00:1c.0: PCI bridge to [bus 0d]
[    0.330492] pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
[    0.330496] pci 0000:00:1c.3:   bridge window [io  0x2000-0x2fff]
[    0.330503] pci 0000:00:1c.3:   bridge window [mem 0xf0000000-0xf1ffffff]
[    0.330508] pci 0000:00:1c.3:   bridge window [mem 0xf2800000-0xf28fffff 64bit pref]
[    0.330516] pci 0000:00:1c.4: PCI bridge to [bus 02]
[    0.330522] pci 0000:00:1c.4:   bridge window [mem 0xf2400000-0xf24fffff]
[    0.330532] pci 0000:00:1e.0: PCI bridge to [bus 0e]
[    0.330547] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
[    0.330549] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff]
[    0.330551] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[    0.330553] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.330555] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.330556] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.330558] pci_bus 0000:00: resource 10 [mem 0xc0000000-0xfebfffff]
[    0.330560] pci_bus 0000:05: resource 0 [io  0x2000-0x2fff]
[    0.330562] pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
[    0.330564] pci_bus 0000:05: resource 2 [mem 0xf2800000-0xf28fffff 64bit pref]
[    0.330566] pci_bus 0000:02: resource 1 [mem 0xf2400000-0xf24fffff]
[    0.330568] pci_bus 0000:0e: resource 4 [io  0x0000-0x0cf7]
[    0.330570] pci_bus 0000:0e: resource 5 [io  0x0d00-0xffff]
[    0.330572] pci_bus 0000:0e: resource 6 [mem 0x000a0000-0x000bffff]
[    0.330574] pci_bus 0000:0e: resource 7 [mem 0x000d0000-0x000d3fff]
[    0.330575] pci_bus 0000:0e: resource 8 [mem 0x000d4000-0x000d7fff]
[    0.330577] pci_bus 0000:0e: resource 9 [mem 0x000d8000-0x000dbfff]
[    0.330579] pci_bus 0000:0e: resource 10 [mem 0xc0000000-0xfebfffff]
[    0.330601] NET: Registered protocol family 2
[    0.330756] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
[    0.330857] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
[    0.331039] TCP: Hash tables configured (established 32768 bind 32768)
[    0.331071] TCP: reno registered
[    0.331075] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[    0.331108] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[    0.331178] NET: Registered protocol family 1
[    0.331199] pci 0000:00:02.0: Video device with shadowed ROM
[    0.331520] PCI: CLS 64 bytes, default 64
[    0.331542] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.331545] software IO TLB [mem 0xb727c000-0xbb27c000] (64MB) mapped at [ffff8800b727c000-ffff8800bb27bfff]
[    0.331594] Simple Boot Flag at 0x35 set to 0x80
[    0.332152] sha1_ssse3: Using SSSE3 optimized SHA-1 implementation
[    0.332201] sha256_ssse3: Using SSSE3 optimized SHA-256 implementation
[    0.332292] sha512_ssse3: Using SSSE3 optimized SHA-512 implementation
[    0.332525] futex hash table entries: 1024 (order: 4, 65536 bytes)
[    0.332543] Initialise system trusted keyring
[    0.332690] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.333696] zpool: loaded
[    0.333698] zbud: loaded
[    0.334143] ntfs: driver 2.1.31 [Flags: R/O].
[    0.334242] msgmni has been set to 7493
[    0.334837] Key type asymmetric registered
[    0.334839] Asymmetric key parser 'x509' registered
[    0.334867] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 250)
[    0.334869] io scheduler noop registered
[    0.334870] io scheduler deadline registered
[    0.334893] io scheduler cfq registered (default)
[    0.335308] intel_idle: MWAIT substates: 0x1120
[    0.335310] intel_idle: v0.4 model 0x25
[    0.335311] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.335783] ACPI: AC Adapter [AC] (on-line)
[    0.335881] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[    0.336096] ACPI: Lid Switch [LID]
[    0.336144] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input1
[    0.336149] ACPI: Sleep Button [SLPB]
[    0.336234] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[    0.336239] ACPI: Power Button [PWRF]
[    0.342001] thermal LNXTHERM:00: registered as thermal_zone0
[    0.342007] ACPI: Thermal Zone [THM0] (51 C)
[    0.342187] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.343473] Non-volatile memory driver v1.3
[    0.343537] Linux agpgart interface v0.103
[    0.343590] agpgart-intel 0000:00:00.0: Intel HD Graphics Chipset
[    0.343612] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[    0.344173] agpgart-intel 0000:00:00.0: detected 32768K stolen memory
[    0.344400] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[    0.344439] Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
[    0.344460] [drm] Initialized drm 1.1.0 20060810
[    0.344866] [drm:i915_dump_device_info] i915 device info: gen=5, pciid=0x0046 rev=0x02 flags=is_mobile,need_gfx_hws,has_fbc,has_hotplug,
[    0.344887] [drm:intel_detect_pch] Found Ibex Peak PCH
[    0.344891] [drm] Memory usable by graphics device = 2048M
[    0.344893] [drm:i915_gem_gtt_init] GMADR size = 256M
[    0.344894] [drm:i915_gem_gtt_init] GTT stolen size = 32M
[    0.344895] [drm:i915_gem_gtt_init] ppgtt mode: 0
[    0.344896] [drm] Replacing VGA console driver
[    0.345500] Console: switching to colour dummy device 80x25
[    0.348138] [drm:intel_opregion_setup] graphic opregion physical addr: 0xbb77f018
[    0.348147] [drm:intel_opregion_setup] Public ACPI methods supported
[    0.348150] [drm:intel_opregion_setup] SWSCI supported
[    0.353790] [drm:swsci_setup] SWSCI GBDA callbacks 00000483, SBCB callbacks 00000203
[    0.353796] [drm:intel_opregion_setup] ASLE supported
[    0.353872] i915 0000:00:02.0: irq 24 for MSI/MSI-X
[    0.353883] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    0.353884] [drm] Driver supports precise vblank timestamp query.
[    0.353887] [drm:init_vbt_defaults] Set default to SSC at 120000 kHz
[    0.353890] [drm:validate_vbt] Using VBT from OpRegion: $VBT IRONLAKE-MOBILEd
[    0.353893] [drm:parse_general_features] BDB_GENERAL_FEATURES int_tv_support 0 int_crt_support 1 lvds_use_ssc 1 lvds_ssc_freq 120000 display_clock_mode 0 fdi_rx_polarity_inverted 0
[    0.353894] [drm:parse_general_definitions] crt_ddc_bus_pin: 2
[    0.353897] [drm:parse_lfp_panel_data] DRRS supported mode is static
[    0.353900] [drm:parse_lfp_panel_data] Found panel mode in BIOS VBT tables:
[    0.353903] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 0 69300 1280 1328 1360 1403 800 803 809 821 0x8 0xa
[    0.353905] [drm:parse_lfp_panel_data] VBT initial LVDS value 300300
[    0.353907] [drm:parse_lfp_backlight] VBT backlight PWM modulation frequency 625 Hz, active high, min brightness 4, level 255
[    0.353909] [drm:parse_sdvo_panel_data] Found SDVO panel mode in BIOS VBT tables:
[    0.353912] [drm:drm_mode_debug_printmodeline] Modeline 0:"1600x1200" 0 162000 1600 1664 1856 2160 1200 1201 1204 1250 0x8 0xa
[    0.353914] [drm:parse_sdvo_device_mapping] No SDVO device info is found in VBT
[    0.353916] [drm:parse_driver_features] DRRS State Enabled:1
[    0.353982] [drm:intel_dsm_pci_probe] no _DSM method for intel device
[    0.353988] [drm:i915_gem_init_stolen] found 33554432 bytes of stolen memory at be000000
[    0.353991] [drm:intel_display_power_get] enabling always-on
[    0.354062] [drm:intel_print_wm_latency] Primary WM0 latency 7 (0.7 usec)
[    0.354064] [drm:intel_print_wm_latency] Primary WM1 latency 10 (5.0 usec)
[    0.354066] [drm:intel_print_wm_latency] Primary WM2 latency 34 (17.0 usec)
[    0.354068] [drm:intel_print_wm_latency] Sprite WM0 latency 13 (1.3 usec)
[    0.354070] [drm:intel_print_wm_latency] Sprite WM1 latency 10 (5.0 usec)
[    0.354071] [drm:intel_print_wm_latency] Sprite WM2 latency 34 (17.0 usec)
[    0.354073] [drm:intel_print_wm_latency] Cursor WM0 latency 13 (1.3 usec)
[    0.354075] [drm:intel_print_wm_latency] Cursor WM1 latency 10 (5.0 usec)
[    0.354077] [drm:intel_print_wm_latency] Cursor WM2 latency 34 (17.0 usec)
[    0.354081] [drm:intel_modeset_init] 2 display pipes available.
[    0.354101] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    0.364851] ACPI: Battery Slot [BAT0] (battery present)
[    0.367305] [drm:intel_lvds_init] using preferred mode from EDID: 
[    0.367314] [drm:drm_mode_debug_printmodeline] Modeline 17:"1280x800" 60 69300 1280 1328 1360 1403 800 803 809 821 0x48 0xa
[    0.367322] [drm:intel_lvds_init] detected single-link lvds configuration
[    0.367418] [drm:intel_panel_setup_backlight] backlight initialized, enabled, brightness 784/1562, sysfs interface registered
[    0.367477] [drm:intel_crt_reset] pch crt adpa set to 0xf40000
[    0.367550] [drm:intel_dp_init_connector] Adding DP connector on port C
[    0.367595] [drm:intel_dp_aux_init] registering DPDDC-C bus for card0-DP-1
[    0.367660] [drm:ironlake_init_pch_refclk] has_panel 1 has_lvds 1 has_ck505 0
[    0.368091] [drm:intel_modeset_readout_hw_state] [CRTC:8] hw state readout: enabled
[    0.368096] [drm:intel_modeset_readout_hw_state] [CRTC:12] hw state readout: disabled
[    0.368104] [drm:intel_modeset_readout_hw_state] PCH DPLL A hw state readout: refcount 1, on 1
[    0.368112] [drm:intel_modeset_readout_hw_state] PCH DPLL B hw state readout: refcount 0, on 0
[    0.368120] [drm:intel_modeset_readout_hw_state] [ENCODER:15:LVDS-15] hw state readout: enabled, pipe A
[    0.368126] [drm:intel_modeset_readout_hw_state] [ENCODER:23:DAC-23] hw state readout: disabled, pipe A
[    0.368131] [drm:intel_modeset_readout_hw_state] [ENCODER:24:TMDS-24] hw state readout: disabled, pipe A
[    0.368137] [drm:intel_modeset_readout_hw_state] [ENCODER:29:TMDS-29] hw state readout: disabled, pipe A
[    0.368143] [drm:intel_modeset_readout_hw_state] [CONNECTOR:14:LVDS-1] hw state readout: enabled
[    0.368148] [drm:intel_modeset_readout_hw_state] [CONNECTOR:22:VGA-1] hw state readout: disabled
[    0.368153] [drm:intel_modeset_readout_hw_state] [CONNECTOR:25:HDMI-A-1] hw state readout: disabled
[    0.368159] [drm:intel_modeset_readout_hw_state] [CONNECTOR:30:DP-1] hw state readout: disabled
[    0.368165] [drm:intel_dump_pipe_config] [CRTC:8][setup_hw_state] config for pipe A
[    0.368168] [drm:intel_dump_pipe_config] cpu_transcoder: A
[    0.368172] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 0
[    0.368176] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 4, gmch_m: 1211105, gmch_n: 8388608, link_m: 134567, link_n: 524288, tu: 64
[    0.368180] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.368184] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    0.368187] [drm:intel_dump_pipe_config] requested mode:
[    0.368193] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 720 0 0 0 400 0 0 0 0x0 0x0
[    0.368196] [drm:intel_dump_pipe_config] adjusted mode:
[    0.368201] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0xa
[    0.368207] [drm:intel_dump_crtc_timings] crtc timings: 69286 1280 1328 1360 1403 800 803 809 821, type: 0x0 flags: 0xa
[    0.368210] [drm:intel_dump_pipe_config] port clock: 69286
[    0.368213] [drm:intel_dump_pipe_config] pipe src size: 720x400
[    0.368217] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    0.368220] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x05000320, enabled
[    0.368223] [drm:intel_dump_pipe_config] ips: 0
[    0.368226] [drm:intel_dump_pipe_config] double wide: 0
[    0.368231] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
[    0.368236] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
[    0.368239] [drm:i915_get_vblank_timestamp] crtc 1 is disabled
[    0.368244] [drm:gm45_get_vblank_counter] trying to get vblank count for disabled pipe B
[    0.368248] [drm:intel_dump_pipe_config] [CRTC:12][setup_hw_state] config for pipe B
[    0.368251] [drm:intel_dump_pipe_config] cpu_transcoder: B
[    0.368254] [drm:intel_dump_pipe_config] pipe bpp: 0, dithering: 0
[    0.368258] [drm:intel_dump_pipe_config] fdi/pch: 0, lanes: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.368262] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.368266] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    0.368269] [drm:intel_dump_pipe_config] requested mode:
[    0.368274] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    0.368277] [drm:intel_dump_pipe_config] adjusted mode:
[    0.368282] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    0.368287] [drm:intel_dump_crtc_timings] crtc timings: 0 0 0 0 0 0 0 0 0, type: 0x0 flags: 0x0
[    0.368290] [drm:intel_dump_pipe_config] port clock: 0
[    0.368293] [drm:intel_dump_pipe_config] pipe src size: 0x0
[    0.368297] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    0.368300] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    0.368303] [drm:intel_dump_pipe_config] ips: 0
[    0.368306] [drm:intel_dump_pipe_config] double wide: 0
[    0.368316] [drm:intel_connector_check_state] [CONNECTOR:14:LVDS-1]
[    0.368325] [drm:check_encoder_state] [ENCODER:15:LVDS-15]
[    0.368330] [drm:check_encoder_state] [ENCODER:23:DAC-23]
[    0.368335] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
[    0.368340] [drm:check_encoder_state] [ENCODER:29:TMDS-29]
[    0.368345] [drm:check_crtc_state] [CRTC:8]
[    0.368369] [drm:check_crtc_state] [CRTC:12]
[    0.368372] [drm:check_shared_dpll_state] PCH DPLL A
[    0.368380] [drm:check_shared_dpll_state] PCH DPLL B
[    0.368395] [drm:ironlake_get_plane_config] pipe/plane 0/0 with fb: size=720x400@32, offset=0, pitch 768, size 0x4b000
[    0.368400] [drm:i915_gem_object_create_stolen_for_preallocated] creating preallocated stolen object: stolen_offset=0, gtt_offset=0, size=4b000
[    0.368406] [drm:i915_pages_create_for_stolen] offset=0x0, size=307200
[    0.368414] [drm:intel_alloc_plane_obj] plane fb obj ffff8800b6d96000
[    0.368419] [drm:i915_gem_setup_global_gtt] reserving preallocated space: 0 + 4b000
[    0.368423] [drm:i915_gem_setup_global_gtt] clearing unused GTT space: [4b000, 7ffff000]
[    0.374441] [drm:i915_gem_context_init] fake context support initialized
[    0.374479] [drm:init_status_page] render ring hws offset: 0x0004c000
[    0.374483] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
[    0.374488] [drm:i915_pages_create_for_stolen] offset=0x4b000, size=131072
[    0.374529] [drm:intel_init_pipe_control] render ring pipe control offset: 0x0006f000
[    0.374538] [drm:init_status_page] bsd ring hws offset: 0x00070000
[    0.374542] [drm:i915_gem_object_create_stolen] creating stolen object: size=20000
[    0.374546] [drm:i915_pages_create_for_stolen] offset=0x6b000, size=131072
[    0.374601] [drm:ironlake_enable_drps] fmax: 0, fmin: 7, fstart: 5
[    0.375761] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:LVDS-1]
[    0.375768] [drm:intel_lvds_detect] [CONNECTOR:14:LVDS-1]
[    0.375785] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:14:LVDS-1] probed modes :
[    0.375793] [drm:drm_mode_debug_printmodeline] Modeline 17:"1280x800" 60 69300 1280 1328 1360 1403 800 803 809 821 0x48 0xa
[    0.375799] [drm:drm_mode_debug_printmodeline] Modeline 18:"1280x800" 50 57590 1280 1328 1360 1403 800 803 809 821 0x40 0xa
[    0.375803] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:VGA-1]
[    0.375807] [drm:intel_crt_detect] [CONNECTOR:22:VGA-1] force=1
[    0.375814] [drm:intel_ironlake_crt_detect_hotplug] trigger hotplug detect cycle: adpa=0xf40000
[    0.379525] ACPI: Video Device [VID] (multi-head: yes  rom: no  post: no)
[    0.379683] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input3
[    0.379777] [drm] Initialized i915 1.6.0 20140905 for 0000:00:02.0 on minor 0
[    0.381233] loop: module loaded
[    0.381338] ACPI Warning: SystemIO range 0x0000000000001028-0x000000000000102f conflicts with OpRegion 0x0000000000001000-0x000000000000107f (\_SB_.PCI0.LPC_.PMIO) (20140926/utaddress-258)
[    0.381349] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.381355] ACPI Warning: SystemIO range 0x00000000000011c0-0x00000000000011cf conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20140926/utaddress-258)
[    0.381363] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.381365] ACPI Warning: SystemIO range 0x00000000000011b0-0x00000000000011bf conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20140926/utaddress-258)
[    0.381373] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.381375] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011af conflicts with OpRegion 0x0000000000001180-0x00000000000011ff (\_SB_.PCI0.LPC_.LPIO) (20140926/utaddress-258)
[    0.381382] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[    0.381385] lpc_ich: Resource conflict(s) found affecting gpio_ich
[    0.381492] ahci 0000:00:1f.2: version 3.0
[    0.381682] ahci 0000:00:1f.2: irq 25 for MSI/MSI-X
[    0.381741] ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
[    0.381803] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 3 Gbps 0x31 impl SATA mode
[    0.381810] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ems sxs apst 
[    0.385823] [drm:intel_ironlake_crt_detect_hotplug] ironlake hotplug adpa=0xf40000, result 0
[    0.385830] [drm:intel_crt_detect] CRT not detected via hotplug
[    0.386043] [drm:gmbus_xfer] GMBUS [i915 gmbus vga] NAK for addr: 0050 r(1)
[    0.386049] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[    0.386052] [drm:intel_crt_get_edid] CRT GMBUS EDID read failed, retry using GPIO bit-banging
[    0.386056] [drm:intel_gmbus_force_bit] enabling bit-banging on i915 gmbus vga. force bit now 1
[    0.386441] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus vga
[    0.386442] [drm:intel_gmbus_force_bit] disabling bit-banging on i915 gmbus vga. force bit now 0
[    0.386444] [drm:intel_crt_detect_ddc] CRT not detected via DDC:0x50 [no valid EDID found]
[    0.386446] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:22:VGA-1] disconnected
[    0.386448] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-1]
[    0.386450] [drm:intel_hdmi_detect] [CONNECTOR:25:HDMI-A-1]
[    0.386577] scsi host0: ahci
[    0.386633] [drm:gmbus_xfer] GMBUS [i915 gmbus dpc] NAK for addr: 0050 r(1)
[    0.386638] [drm:drm_do_probe_ddc_edid] drm: skipping non-existent adapter i915 gmbus dpc
[    0.386642] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:25:HDMI-A-1] disconnected
[    0.386646] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:DP-1]
[    0.386650] [drm:intel_dp_detect] [CONNECTOR:30:DP-1]
[    0.386655] [drm:drm_helper_probe_single_connector_modes_merge_bits] [CONNECTOR:30:DP-1] disconnected
[    0.386659] [drm:drm_setup_crtcs] 
[    0.386664] [drm:drm_enable_connectors] connector 14 enabled? yes
[    0.386667] [drm:drm_enable_connectors] connector 22 enabled? no
[    0.386670] [drm:drm_enable_connectors] connector 25 enabled? no
[    0.386673] [drm:drm_enable_connectors] connector 30 enabled? no
[    0.386677] [drm:intel_fb_initial_config] looking for cmdline mode on connector LVDS-1
[    0.386680] [drm:intel_fb_initial_config] looking for preferred mode on connector LVDS-1
[    0.386685] [drm:intel_fb_initial_config] connector LVDS-1 on pipe A [CRTC:8]: 1280x800
[    0.386689] [drm:intel_fb_initial_config] connector VGA-1 not enabled, skipping
[    0.386692] [drm:intel_fb_initial_config] connector HDMI-A-1 not enabled, skipping
[    0.386695] [drm:intel_fb_initial_config] connector DP-1 not enabled, skipping
[    0.386699] [drm:drm_setup_crtcs] desired mode 1280x800 set on crtc 8
[    0.386704] [drm:intelfb_create] no BIOS fb, allocating a new one
[    0.386708] [drm:i915_gem_object_create_stolen] creating stolen object: size=3e8000
[    0.386716] [drm:i915_pages_create_for_stolen] offset=0x8b000, size=4096000
[    0.386854] scsi host1: ahci
[    0.386990] scsi host2: ahci
[    0.387119] scsi host3: ahci
[    0.387246] scsi host4: ahci
[    0.387375] scsi host5: ahci
[    0.387424] ata1: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727100 irq 25
[    0.387426] ata2: DUMMY
[    0.387427] ata3: DUMMY
[    0.387428] ata4: DUMMY
[    0.387431] ata5: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727300 irq 25
[    0.387434] ata6: SATA max UDMA/133 abar m2048@0xf2727000 port 0xf2727380 irq 25
[    0.387529] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.387531] ehci-pci: EHCI PCI platform driver
[    0.387657] ehci-pci 0000:00:1a.0: EHCI Host Controller
[    0.387731] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    0.387749] ehci-pci 0000:00:1a.0: debug port 2
[    0.387938] [drm:intelfb_create] allocated 1280x800 fb: 0x00092000, bo ffff880132db4000
[    0.391667] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[    0.391688] ehci-pci 0000:00:1a.0: irq 23, io mem 0xf2728000
[    0.391703] fbcon: inteldrmfb (fb0) is primary device
[    0.391747] [drm:intel_crtc_set_config] [CRTC:8] [FB:33] #connectors=1 (x y) (0 0)
[    0.391750] [drm:intel_set_config_compute_mode_changes] modes are different, full mode set
[    0.391752] [drm:drm_mode_debug_printmodeline] Modeline 0:"" 0 0 0 0 0 0 0 0 0 0 0x0 0x0
[    0.391754] [drm:drm_mode_debug_printmodeline] Modeline 32:"1280x800" 60 69300 1280 1328 1360 1403 800 803 809 821 0x48 0xa
[    0.391755] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=1, fb_changed=1
[    0.391756] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
[    0.391758] [drm:intel_modeset_affected_pipes] set mode pipe masks: modeset: 1, prepare: 1, disable: 0
[    0.391761] [drm:connected_sink_compute_bpp] [CONNECTOR:14:LVDS-1] checking for sink bpp constrains
[    0.391762] [drm:intel_lvds_compute_config] forcing display bpp (was 24) to LVDS (18)
[    0.391765] [drm:ironlake_check_fdi_lanes] checking fdi config on pipe A, lanes 1
[    0.391766] [drm:intel_modeset_pipe_config] plane bpp: 24, pipe bpp: 18, dithering: 1
[    0.391767] [drm:intel_dump_pipe_config] [CRTC:8][modeset] config for pipe A
[    0.391767] [drm:intel_dump_pipe_config] cpu_transcoder: A
[    0.391768] [drm:intel_dump_pipe_config] pipe bpp: 18, dithering: 1
[    0.391769] [drm:intel_dump_pipe_config] fdi/pch: 1, lanes: 1, gmch_m: 2422210, gmch_n: 4194304, link_m: 134567, link_n: 524288, tu: 64
[    0.391771] [drm:intel_dump_pipe_config] dp: 0, gmch_m: 0, gmch_n: 0, link_m: 0, link_n: 0, tu: 0
[    0.391772] [drm:intel_dump_pipe_config] dp: 0, gmch_m2: 0, gmch_n2: 0, link_m2: 0, link_n2: 0, tu2: 0
[    0.391772] [drm:intel_dump_pipe_config] requested mode:
[    0.391774] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 60 69300 1280 1328 1360 1403 800 803 809 821 0x48 0xa
[    0.391775] [drm:intel_dump_pipe_config] adjusted mode:
[    0.391777] [drm:drm_mode_debug_printmodeline] Modeline 0:"1280x800" 60 69300 1280 1328 1360 1403 800 803 809 821 0x48 0xa
[    0.391778] [drm:intel_dump_crtc_timings] crtc timings: 69300 1280 1328 1360 1403 800 803 809 821, type: 0x48 flags: 0xa
[    0.391779] [drm:intel_dump_pipe_config] port clock: 69300
[    0.391780] [drm:intel_dump_pipe_config] pipe src size: 1280x800
[    0.391781] [drm:intel_dump_pipe_config] gmch pfit: control: 0x00000000, ratios: 0x00000000, lvds border: 0x00000000
[    0.391782] [drm:intel_dump_pipe_config] pch pfit: pos: 0x00000000, size: 0x00000000, disabled
[    0.391782] [drm:intel_dump_pipe_config] ips: 0
[    0.391783] [drm:intel_dump_pipe_config] double wide: 0
[    0.391795] [drm:intel_panel_actually_set_backlight] set backlight PWM = 0
[    0.396744] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[    0.396810] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    0.396813] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.396816] usb usb1: Product: EHCI Host Controller
[    0.396818] usb usb1: Manufacturer: Linux 3.18.0-rc4+ ehci_hcd
[    0.396820] usb usb1: SerialNumber: 0000:00:1a.0
[    0.397068] hub 1-0:1.0: USB hub found
[    0.397074] hub 1-0:1.0: 3 ports detected
[    0.397270] ehci-pci 0000:00:1d.0: EHCI Host Controller
[    0.397312] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[    0.397326] ehci-pci 0000:00:1d.0: debug port 2
[    0.401237] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[    0.401251] ehci-pci 0000:00:1d.0: irq 19, io mem 0xf2728400
[    0.406830] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[    0.406886] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    0.406888] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    0.406890] usb usb2: Product: EHCI Host Controller
[    0.406892] usb usb2: Manufacturer: Linux 3.18.0-rc4+ ehci_hcd
[    0.406893] usb usb2: SerialNumber: 0000:00:1d.0
[    0.407212] hub 2-0:1.0: USB hub found
[    0.407220] hub 2-0:1.0: 3 ports detected
[    0.407337] uhci_hcd: USB Universal Host Controller Interface driver
[    0.407370] usbcore: registered new interface driver usb-storage
[    0.407399] i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
[    0.410669] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.410695] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.410838] mousedev: PS/2 mouse device common for all mice
[    0.411800] I2O subsystem v1.325
[    0.411802] i2o: max drivers = 8
[    0.411975] rtc_cmos 00:02: RTC can wake from S4
[    0.412213] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[    0.412252] rtc_cmos 00:02: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[    0.412265] i2c /dev entries driver
[    0.412957] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[    0.413138] uvcvideo: Unable to create debugfs directory
[    0.413163] usbcore: registered new interface driver uvcvideo
[    0.413164] USB Video Class driver (1.1.1)
[    0.413339] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    0.413372] iTCO_wdt: Found a QM57 TCO device (Version=2, TCOBASE=0x1060)
[    0.413568] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    0.413578] iTCO_vendor_support: vendor-support=0
[    0.413636] device-mapper: uevent: version 1.0.3
[    0.413798] device-mapper: ioctl: 4.28.0-ioctl (2014-09-17) initialised: dm-devel@redhat.com
[    0.413858] usbcore: registered new interface driver usbhid
[    0.413859] usbhid: USB HID core driver
[    0.415376] thinkpad_acpi: ThinkPad ACPI Extras v0.25
[    0.415377] thinkpad_acpi: http://ibm-acpi.sf.net/
[    0.415378] thinkpad_acpi: ThinkPad BIOS 6QET69WW (1.39 ), EC 6QHT33WW-1.14
[    0.415379] thinkpad_acpi: Lenovo ThinkPad X201, model 3323L7T
[    0.416109] thinkpad_acpi: detected a 16-level brightness capable ThinkPad
[    0.416388] thinkpad_acpi: radio switch found; radios are enabled
[    0.416600] thinkpad_acpi: possible tablet mode switch found; ThinkPad in laptop mode
[    0.416815] thinkpad_acpi: This ThinkPad has standard ACPI backlight brightness control, supported by the ACPI video driver
[    0.416815] thinkpad_acpi: Disabling thinkpad-acpi brightness events by default...
[    0.416820] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[    0.421923] thinkpad_acpi: Standard ACPI backlight interface available, not loading native one
[    0.422090] thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
[    0.424484] input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
[    0.424606] intel ips 0000:00:1f.6: CPU TDP doesn't match expected value (found 25, expected 29)
[    0.424803] intel ips 0000:00:1f.6: IPS driver initialized, MCP temp limit 90
[    0.425073] snd_hda_intel 0000:00:1b.0: irq 26 for MSI/MSI-X
[    0.425151] Netfilter messages via NETLINK v0.30.
[    0.425153] nfnl_acct: registering with nfnetlink.
[    0.425161] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[    0.425247] ctnetlink v0.93: registering with nfnetlink.
[    0.426395] ip_tables: (C) 2000-2006 Netfilter Core Team
[    0.426454] arp_tables: (C) 2002 David S. Miller
[    0.426535] TCP: cubic registered
[    0.426536] TCP: veno registered
[    0.426628] NET: Registered protocol family 10
[    0.426866] NET: Registered protocol family 17
[    0.426871] NET: Registered protocol family 15
[    0.427159] Loading compiled-in X.509 certificates
[    0.428315] Loaded X.509 cert 'Magrathea: Glacier signing key: 742c3b2ff369b42635042c8e86f9f2fd95d23252'
[    0.429089] rtc_cmos 00:02: setting system clock to 2014-11-13 21:29:21 UTC (1415914161)
[    0.434398] sound hdaudioC0D0: CX20585: BIOS auto-probing.
[    0.435047] sound hdaudioC0D0: autoconfig: line_outs=1 (0x1f/0x0/0x0/0x0/0x0) type:speaker
[    0.435049] sound hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    0.435051] sound hdaudioC0D0:    hp_outs=2 (0x1c/0x19/0x0/0x0/0x0)
[    0.435057] sound hdaudioC0D0:    mono: mono_out=0x0
[    0.435059] sound hdaudioC0D0:    inputs:
[    0.435062] sound hdaudioC0D0:      Internal Mic=0x23
[    0.435065] sound hdaudioC0D0:      Mic=0x1b
[    0.435068] sound hdaudioC0D0:      Dock Mic=0x1a
[    0.435759] ALSA device list:
[    0.435760]   #29: ThinkPad Console Audio Control at EC reg 0x30, fw 6QHT33WW-1.14
[    0.436449] sound hdaudioC0D0: Enable sync_write for stable communication
[    0.438187] sound hdaudioC0D3: autoconfig: line_outs=0 (0x0/0x0/0x0/0x0/0x0) type:line
[    0.438189] sound hdaudioC0D3:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    0.438190] sound hdaudioC0D3:    hp_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    0.438191] sound hdaudioC0D3:    mono: mono_out=0x0
[    0.438192] sound hdaudioC0D3:    dig-out=0x5/0x0
[    0.438193] sound hdaudioC0D3:    inputs:
[    0.693747] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    0.694390] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
[    0.694396] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
[    0.694400] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
[    0.694713] [drm:intel_disable_shared_dpll] disable PCH DPLL A (active 1, on? 1) for crtc 8
[    0.694721] [drm:intel_disable_shared_dpll] disabling PCH DPLL A
[    0.695015] ata1.00: ATA-9: M4-CT128M4SSD2, 070H, max UDMA/100
[    0.695018] ata1.00: 250069680 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.695143] [drm:intel_update_fbc] no output, disabling
[    0.695155] [drm:ironlake_get_refclk] using SSC reference clock of 120000 kHz
[    0.695204] [drm:intel_get_shared_dpll] CRTC:8 dropping existing PCH DPLL A
[    0.695206] [drm:intel_get_shared_dpll] CRTC:8 using pre-allocated PCH DPLL A
[    0.695208] [drm:intel_get_shared_dpll] using PCH DPLL A for pipe A
[    0.695211] [drm:intel_prepare_shared_dpll] setting up PCH DPLL A
[    0.695592] ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
[    0.695609] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
[    0.695612] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
[    0.695994] ata1.00: configured for UDMA/100
[    0.696130] [drm:ironlake_fdi_link_train] FDI_RX_IIR 0x700
[    0.696131] [drm:ironlake_fdi_link_train] FDI train 1 done.
[    0.696289] [drm:ironlake_fdi_link_train] FDI_RX_IIR 0x600
[    0.696291] [drm:ironlake_fdi_link_train] FDI train 2 done.
[    0.696292] [drm:ironlake_fdi_link_train] FDI train done
[    0.696294] [drm:intel_enable_shared_dpll] enable PCH DPLL A (active 0, on? 0) for crtc 8
[    0.696296] [drm:intel_enable_shared_dpll] enabling PCH DPLL A
[    0.698622] usb 1-1: new high-speed USB device number 2 using ehci-pci
[    0.708612] usb 2-1: new high-speed USB device number 2 using ehci-pci
[    0.813257] usb 1-1: New USB device found, idVendor=8087, idProduct=0020
[    0.813260] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.813607] hub 1-1:1.0: USB hub found
[    0.813754] hub 1-1:1.0: 6 ports detected
[    0.823454] usb 2-1: New USB device found, idVendor=8087, idProduct=0020
[    0.823456] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[    0.823740] hub 2-1:1.0: USB hub found
[    0.823822] hub 2-1:1.0: 8 ports detected
[    0.915522] [drm:intel_panel_enable_backlight] pipe A
[    0.915528] [drm:intel_panel_actually_set_backlight] set backlight PWM = 784
[    0.915540] [drm:ironlake_update_primary_plane] Writing base 00092000 00000000 0 0 5120
[    0.915544] [drm:intel_update_fbc] disabled per chip default
[    0.915552] [drm:intel_connector_check_state] [CONNECTOR:14:LVDS-1]
[    0.915560] [drm:check_encoder_state] [ENCODER:15:LVDS-15]
[    0.915563] [drm:check_encoder_state] [ENCODER:23:DAC-23]
[    0.915566] [drm:check_encoder_state] [ENCODER:24:TMDS-24]
[    0.915568] [drm:check_encoder_state] [ENCODER:29:TMDS-29]
[    0.915571] [drm:check_crtc_state] [CRTC:8]
[    0.915590] [drm:check_crtc_state] [CRTC:12]
[    0.915592] [drm:check_shared_dpll_state] PCH DPLL A
[    0.915597] [drm:check_shared_dpll_state] PCH DPLL B
[    0.915613] [drm:intel_crtc_set_config] [CRTC:12] [NOFB]
[    0.915615] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:12], mode_changed=0, fb_changed=0
[    0.915617] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
[    0.915682] [drm:intel_crtc_set_config] [CRTC:8] [FB:33] #connectors=1 (x y) (0 0)
[    0.915686] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[    0.915689] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
[    0.922263] Console: switching to colour frame buffer device 160x50
[    0.922271] [drm:intel_crtc_set_config] [CRTC:8] [FB:33] #connectors=1 (x y) (0 0)
[    0.922274] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[    0.922276] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
[    0.928882] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    0.928883] i915 0000:00:02.0: registered panic notifier
[    0.934986] scsi 0:0:0:0: Direct-Access     ATA      M4-CT128M4SSD2   070H PQ: 0 ANSI: 5
[    0.935305] sd 0:0:0:0: [sda] 250069680 512-byte logical blocks: (128 GB/119 GiB)
[    0.935322] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    0.935361] sd 0:0:0:0: [sda] Write Protect is off
[    0.935368] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.935393] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.937872]  sda: sda1 sda2 sda4 sda5 sda6
[    0.938602] sd 0:0:0:0: [sda] Attached SCSI disk
[    1.088648] usb 1-1.6: new high-speed USB device number 3 using ehci-pci
[    1.179568] usb 1-1.6: New USB device found, idVendor=17ef, idProduct=4816
[    1.179576] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    1.179580] usb 1-1.6: Product: Integrated Camera
[    1.179585] usb 1-1.6: Manufacturer: Chicony Electronics Co., Ltd.
[    1.180530] uvcvideo: Found UVC 1.00 device Integrated Camera (17ef:4816)
[    1.251527] ata5: SATA link down (SStatus 0 SControl 300)
[    1.333434] tsc: Refined TSC clocksource calibration: 2127.999 MHz
[    1.556376] ata6: SATA link down (SStatus 0 SControl 300)
[    1.559335] EXT4-fs (sda4): mounted filesystem with writeback data mode. Opts: data=writeback
[    1.559351] VFS: Mounted root (ext4 filesystem) readonly on device 8:4.
[    1.560853] devtmpfs: mounted
[    1.562327] Freeing unused kernel memory: 768K (ffffffff81a79000 - ffffffff81b39000)
[    1.562330] Write protecting the kernel read-only data: 10240k
[    1.570834] Freeing unused kernel memory: 1852K (ffff880001631000 - ffff880001800000)
[    1.572688] Freeing unused kernel memory: 688K (ffff880001954000 - ffff880001a00000)
[    1.608815] random: systemd urandom read with 22 bits of entropy available
[    1.679987] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[    1.724630] EXT4-fs (sda4): re-mounted. Opts: discard
[    1.756279] systemd-journald[127]: Received request to flush runtime journal from PID 1
[    1.780992] e1000e: Intel(R) PRO/1000 Network Driver - 2.3.2-k
[    1.780996] e1000e: Copyright(c) 1999 - 2014 Intel Corporation.
[    1.781225] e1000e 0000:00:19.0: Interrupt Throttling Rate (ints/sec) set to dynamic conservative mode
[    1.781254] e1000e 0000:00:19.0: irq 27 for MSI/MSI-X
[    1.788865] Intel(R) Wireless WiFi driver for Linux, in-tree:
[    1.788868] Copyright(c) 2003- 2014 Intel Corporation
[    1.789034] iwlwifi 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.789210] iwlwifi 0000:02:00.0: irq 28 for MSI/MSI-X
[    1.791185] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000-6.ucode failed with error -2
[    1.791197] iwlwifi 0000:02:00.0: Direct firmware load for iwlwifi-6000-5.ucode failed with error -2
[    1.794195] iwlwifi 0000:02:00.0: loaded firmware version 9.221.4.1 build 25532 op_mode iwldvm
[    1.805234] [drm:intel_backlight_device_update_status] updating intel_backlight, brightness=771/1562
[    1.805240] [drm:intel_panel_actually_set_backlight] set backlight PWM = 784
[    1.814174] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUG disabled
[    1.814180] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEBUGFS disabled
[    1.814183] iwlwifi 0000:02:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[    1.814186] iwlwifi 0000:02:00.0: Detected Intel(R) Centrino(R) Advanced-N 6200 AGN, REV=0x74
[    1.815029] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[    1.834939] ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
[    1.843434] iwlwifi 0000:02:00.0 wlp2s0: renamed from wlan0
[    1.847521] Adding 524284k swap on /dev/sda2.  Priority:-1 extents:1 across:524284k SSFS
[    1.856001] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
[    1.858442] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
[    1.899333] EXT4-fs (sda5): barriers disabled
[    1.903567] EXT4-fs (sda5): mounted filesystem with writeback data mode. Opts: discard,data=writeback,barrier=0
[    1.971970] e1000e 0000:00:19.0 eth0: (PCI Express:2.5GT/s:Width x1) 5c:ff:35:01:7d:ca
[    1.971979] e1000e 0000:00:19.0 eth0: Intel(R) PRO/1000 Network Connection
[    1.972082] e1000e 0000:00:19.0 eth0: MAC: 9, PHY: 10, PBA No: A002FF-0FF
[    1.974337] e1000e 0000:00:19.0 enp0s25: renamed from eth0
[    1.986830] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[    1.995292] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
[    2.201776] iwlwifi 0000:02:00.0: L1 Enabled - LTR Disabled
[    2.208478] iwlwifi 0000:02:00.0: Radio type=0x1-0x3-0x1
[    2.286645] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
[    2.306797] [drm:intel_crtc_set_config] [CRTC:8] [FB:33] #connectors=1 (x y) (0 0)
[    2.306802] [drm:intel_set_config_compute_mode_changes] computed changes for [CRTC:8], mode_changed=0, fb_changed=0
[    2.306804] [drm:intel_modeset_stage_output_state] [CONNECTOR:14:LVDS-1] to [CRTC:8]
[    2.333186] Switched to clocksource tsc
[    2.663064] cfg80211: Calling CRDA to update world regulatory domain
[    2.775372] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.4, id: 0x1e0b1, caps: 0xd047b3/0xb40000/0xa0000, board id: 71, fw id: 615624
[    2.775380] psmouse serio1: synaptics: serio: Synaptics pass-through port at isa0060/serio1/input0
[    2.793741] cfg80211: Calling CRDA to update world regulatory domain
[    2.827424] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[    5.450258] wlp2s0: authenticate with a4:b1:e9:f3:a4:f9
[    5.450267] wlp2s0: capabilities/regulatory prevented using AP HT/VHT configuration, downgraded
[    5.454862] wlp2s0: send auth to a4:b1:e9:f3:a4:f9 (try 1/3)
[    5.460344] wlp2s0: authenticated
[    5.460474] wlp2s0: waiting for beacon from a4:b1:e9:f3:a4:f9
[    5.497543] random: nonblocking pool is initialized
[    5.516706] wlp2s0: associate with a4:b1:e9:f3:a4:f9 (try 1/3)
[    5.520197] wlp2s0: RX AssocResp from a4:b1:e9:f3:a4:f9 (capab=0x411 status=0 aid=3)
[    5.532341] wlp2s0: associated
[    5.532385] IPv6: ADDRCONF(NETDEV_CHANGE): wlp2s0: link becomes ready
[    6.795337] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/serio2/input/input8
