On Wed, 2013-09-18 at 11:12 +0100, Kevin Curtis wrote:
> Farsite Communications FarSync driver update
> 
> Patch 7 of 7
> 
> Update the help text and description for farsync configuration in the Kernel.
> Build farsync and fsflex when the farsync driver is selected.

fsflex seems to be an entirely independent module and should have its
own config option.

Ben.

> Signed-off-by: Kevin Curtis <[email protected]>
> 
> ---
> 
> diff -uprN -X linux-3.10.1/Documentation/dontdiff 
> linux-3.10.1/drivers/net/wan/Kconfig linux-3.10.1_new/drivers/net/wan/Kconfig
> --- linux-3.10.1/drivers/net/wan/Kconfig      2013-07-13 19:42:41.000000000 
> +0100
> +++ linux-3.10.1_new/drivers/net/wan/Kconfig  2013-07-31 14:11:05.792775800 
> +0100
> @@ -248,11 +248,11 @@ config C101
>         If unsure, say N.
>  
>  config FARSYNC
> -     tristate "FarSync T-Series support"
> +     tristate "FarSync T-Series and Flex support"
>       depends on HDLC && PCI
>       ---help---
> -       Support for the FarSync T-Series X.21 (and V.35/V.24) cards by
> -       FarSite Communications Ltd.
> +       Support for the FarSync T-Series and FarSync Flex X.21 (and
> +          V.35/V.24) ports by FarSite Communications Ltd.
>  
>         Synchronous communication is supported on all ports at speeds up to
>         8Mb/s (128K on V.24) using synchronous PPP, Cisco HDLC, raw HDLC,
> diff -uprN -X linux-3.10.1/Documentation/dontdiff 
> linux-3.10.1/drivers/net/wan/Makefile 
> linux-3.10.1_new/drivers/net/wan/Makefile
> --- linux-3.10.1/drivers/net/wan/Makefile     2013-07-13 19:42:41.000000000 
> +0100
> +++ linux-3.10.1_new/drivers/net/wan/Makefile 2013-07-26 09:14:15.345354002 
> +0100
> @@ -16,7 +16,7 @@ obj-$(CONFIG_HDLC_X25)              += hdlc_x25.o
>  obj-$(CONFIG_HOSTESS_SV11)   += z85230.o     hostess_sv11.o
>  obj-$(CONFIG_SEALEVEL_4021)  += z85230.o     sealevel.o
>  obj-$(CONFIG_COSA)           += cosa.o
> -obj-$(CONFIG_FARSYNC)                += farsync.o
> +obj-$(CONFIG_FARSYNC)                += farsync.o fsflex.o
>  obj-$(CONFIG_DSCC4)             += dscc4.o
>  obj-$(CONFIG_X25_ASY)                += x25_asy.o
> 
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to [email protected]
> More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Ben Hutchings, Staff Engineer, Solarflare
Not speaking for my employer; that's the marketing department's job.
They asked us to note that Solarflare product names are trademarked.

--
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to