Select ARCH_WANT_OPTIONAL_GPIOLIB from SOC_TZ1090 to allow GPIOLIB and GPIO_TZ1090 (the main gpio driver) to be enabled once it is merged, and instantiate it from tz1090.dtsi.
Signed-off-by: James Hogan <[email protected]> Cc: Linus Walleij <[email protected]> --- arch/metag/Kconfig.soc | 1 + arch/metag/boot/dts/tz1090.dtsi | 35 +++++++++++++++++++++++++++++++++++ 2 files changed, 36 insertions(+) diff --git a/arch/metag/Kconfig.soc b/arch/metag/Kconfig.soc index 944dc30..d61d687 100644 --- a/arch/metag/Kconfig.soc +++ b/arch/metag/Kconfig.soc @@ -16,6 +16,7 @@ config META21_FPGA config SOC_TZ1090 bool "Toumaz Xenif TZ1090 SoC (Comet)" + select ARCH_WANT_OPTIONAL_GPIOLIB select IMGPDC_IRQ select METAG_LNKGET_AROUND_CACHE select METAG_META21 diff --git a/arch/metag/boot/dts/tz1090.dtsi b/arch/metag/boot/dts/tz1090.dtsi index f9cb189..d9e537e 100644 --- a/arch/metag/boot/dts/tz1090.dtsi +++ b/arch/metag/boot/dts/tz1090.dtsi @@ -49,5 +49,40 @@ compatible = "img,tz1090-pinctrl"; reg = <0x02005800 0xe4>; }; + + gpios: gpios@02005800 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "img,tz1090-gpio"; + reg = <0x02005800 0x90>; + + gpios0: bank@0 { + gpio-controller; + interrupt-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + reg = <0>; + interrupts = <13 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 0 30>; + }; + gpios1: bank@1 { + gpio-controller; + interrupt-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + reg = <1>; + interrupts = <14 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 30 30>; + }; + gpios2: bank@2 { + gpio-controller; + interrupt-controller; + #gpio-cells = <2>; + #interrupt-cells = <2>; + reg = <2>; + interrupts = <15 IRQ_TYPE_LEVEL_HIGH>; + gpio-ranges = <&pinctrl 0 60 30>; + }; + }; }; }; -- 1.8.1.2 -- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
