Hello Lee jones,
> -----Original Message-----
> From: Lee Jones [mailto:[email protected]]
> Sent: Monday, June 10, 2013 3:36 PM
> To: J, KEERTHY
> Cc: Cousson, Benoit; [email protected]; linux-
> [email protected]; [email protected];
> [email protected]; [email protected]; [email protected];
> [email protected]; [email protected]; [email protected]
> Subject: Re: [PATCH v2 2/2] ARM: dts: OMAP5: add palmas node and omap
> specific palmas regulator properties
>
> On Mon, 10 Jun 2013, J Keerthy wrote:
>
> > Add palmas node and omap specific palmas regulator properties.
> >
> > Signed-off-by: J Keerthy <[email protected]>
> > ---
> > arch/arm/boot/dts/omap5-uevm.dts | 147
> > ++++++++++++++++++++++++++++++++++++++
> > 1 files changed, 147 insertions(+), 0 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/omap5-uevm.dts
> > b/arch/arm/boot/dts/omap5-uevm.dts
> > index 927db1e..ffbcc3f 100644
> > --- a/arch/arm/boot/dts/omap5-uevm.dts
> > +++ b/arch/arm/boot/dts/omap5-uevm.dts
> > @@ -8,6 +8,8 @@
> > /dts-v1/;
> >
> > #include "omap5.dtsi"
> > +#include <dt-bindings/interrupt-controller/irq.h>
> > +#include <dt-bindings/interrupt-controller/arm-gic.h>
> >
> > / {
> > model = "TI OMAP5 uEVM board";
> > @@ -254,6 +256,151 @@
> > pinctrl-0 = <&i2c1_pins>;
> >
> > clock-frequency = <400000>;
> > +
> > + palmas: palmas@48 {
> > + reg = <0x48>;
> > + /* SPI = 0, IRQ# = 7, active high level-sensitive */
>
> I still think this is superfluous, especially now you're using the
> defines which basically say the same thing.
I retained the whole comment as it was needed to specify IRQ# as 7
And thought it completely described the below interrupt property.
I can knock it off if it is totally unnecessary.
If there are no further comments. Can I add a Reviewed-by?
>
> > + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* IRQ_SYS_1N
> */
> > + interrupt-parent = <&gic>;
> > + };
> > +
> > +};
> > +
> > +#include "palmas.dtsi"
> > +
> > +&palmas {
> > + palmas_pmic {
> > + ti,ldo6-vibrator;
> > +
> > + regulators {
> > + smps123_reg: smps123 {
> > + regulator-min-microvolt = < 600000>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + smps45_reg: smps45 {
> > + regulator-min-microvolt = < 600000>;
> > + regulator-max-microvolt = <1310000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + smps6_reg: smps6 {
> > + regulator-min-microvolt = <1200000>;
> > + regulator-max-microvolt = <1200000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + smps7_reg: smps7 {
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + smps8_reg: smps8 {
> > + regulator-min-microvolt = < 600000>;
> > + regulator-max-microvolt = <1310000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + smps9_reg: smps9 {
> > + regulator-min-microvolt = <2100000>;
> > + regulator-max-microvolt = <2100000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + ti,smps-range = <0x80>;
> > + };
> > +
> > + smps10_reg: smps10 {
> > + regulator-min-microvolt = <5000000>;
> > + regulator-max-microvolt = <5000000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo1_reg: ldo1 {
> > + regulator-min-microvolt = <2800000>;
> > + regulator-max-microvolt = <2800000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo2_reg: ldo2 {
> > + regulator-min-microvolt = <2900000>;
> > + regulator-max-microvolt = <2900000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo3_reg: ldo3 {
> > + regulator-min-microvolt = <3000000>;
> > + regulator-max-microvolt = <3000000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo4_reg: ldo4 {
> > + regulator-min-microvolt = <2200000>;
> > + regulator-max-microvolt = <2200000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo5_reg: ldo5 {
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo6_reg: ldo6 {
> > + regulator-min-microvolt = <1500000>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo7_reg: ldo7 {
> > + regulator-min-microvolt = <1500000>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo8_reg: ldo8 {
> > + regulator-min-microvolt = <1500000>;
> > + regulator-max-microvolt = <1500000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldo9_reg: ldo9 {
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <3300000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldoln_reg: ldoln {
> > + regulator-min-microvolt = <1800000>;
> > + regulator-max-microvolt = <1800000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > +
> > + ldousb_reg: ldousb {
> > + regulator-min-microvolt = <3250000>;
> > + regulator-max-microvolt = <3250000>;
> > + regulator-always-on;
> > + regulator-boot-on;
> > + };
> > + };
> > + };
> > };
> >
> > &i2c5 {
>
> --
> Lee Jones
> Linaro ST-Ericsson Landing Team Lead
> Linaro.org │ Open source software for ARM SoCs Follow Linaro: Facebook
> | Twitter | Blog
Regards,
Keerthy
