Add initial device-tree for the OnePlus 8T. Downstream reference is [1]. [1] https://github.com/LineageOS/android_kernel_oneplus_sm8250/blob/lineage-23.2/arch/arm64/boot/dts/vendor/oplus/kona-kebab-overlay.dts
Signed-off-by: Frieder Hannenheim <[email protected]> Co-developed-by: Robert Oscilowski <[email protected]> Signed-off-by: Robert Oscilowski <[email protected]> --- Documentation/devicetree/bindings/arm/qcom.yaml | 1 + arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/sm8250-oneplus-kebab.dts | 129 ++++++++++++++++++++++ 3 files changed, 131 insertions(+) diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml index 50cc18a6ec5e..6e3fdce92798 100644 --- a/Documentation/devicetree/bindings/arm/qcom.yaml +++ b/Documentation/devicetree/bindings/arm/qcom.yaml @@ -1070,6 +1070,7 @@ properties: - qcom,qrb5165-rb5 - qcom,sm8250-hdk - qcom,sm8250-mtp + - oneplus,kebab - samsung,r8q - samsung,x1q - sony,pdx203-generic diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 6f33c4e2f09c..d8292f681e71 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -356,6 +356,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-bahamut.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8150-sony-xperia-kumano-griffin.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-hdk.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-mtp.dtb +dtb-$(CONFIG_ARCH_QCOM) += sm8250-oneplus-kebab.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-samsung-r8q.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-samsung-x1q.dtb dtb-$(CONFIG_ARCH_QCOM) += sm8250-sony-xperia-edo-pdx203.dtb diff --git a/arch/arm64/boot/dts/qcom/sm8250-oneplus-kebab.dts b/arch/arm64/boot/dts/qcom/sm8250-oneplus-kebab.dts new file mode 100644 index 000000000000..67996da204c9 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/sm8250-oneplus-kebab.dts @@ -0,0 +1,129 @@ +// SPDX-License-Identifier: GPL-2.0-only + +/dts-v1/; + +#include "sm8250-oneplus-common.dtsi" + +/ { + model = "OnePlus 8T"; + compatible = "oneplus,kebab", "qcom,sm8250"; +}; + +&battery { + charge-full-design-microamp-hours = <4500000>; + energy-full-design-microwatt-hours = <19575000>; + voltage-max-design-microvolt = <4350000>; +}; + +&framebuffer { + width = <1080>; + height = <2400>; + stride = <(1080 * 4)>; +}; + +&i2c2 { + status = "okay"; + + pm8008: pmic@8 { + compatible = "qcom,pm8008"; + reg = <0x8>; + + interrupt-parent = <&tlmm>; + interrupts = <112 IRQ_TYPE_EDGE_RISING>; + + reset-gpios = <&tlmm 93 GPIO_ACTIVE_LOW>; + + vdd-l1-l2-supply = <&vreg_s8c_1p3>; + vdd-l3-l4-supply = <&vreg_bob>; + vdd-l5-supply = <&vreg_bob>; + vdd-l6-supply = <&vreg_bob>; + vdd-l7-supply = <&vreg_bob>; + + pinctrl-names = "default"; + pinctrl-0 = <&pm8008_default>, <&pm8008_interrupt>; + + gpio-controller; + #gpio-cells = <2>; + gpio-ranges = <&pm8008 0 0 2>; + + interrupt-controller; + #interrupt-cells = <2>; + + #thermal-sensor-cells = <0>; + + regulators { + ldo1 { + regulator-name = "vreg_l1p"; + regulator-min-microvolt = <528000>; + regulator-max-microvolt = <1504000>; + }; + + ldo2 { + regulator-name = "vreg_l2p"; + regulator-min-microvolt = <528000>; + regulator-max-microvolt = <1300000>; + }; + + ldo3 { + regulator-name = "vreg_l3p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3400000>; + }; + + ldo4 { + regulator-name = "vreg_l4p"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo5 { + regulator-name = "vreg_l5p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3400000>; + }; + + ldo6 { + regulator-name = "vreg_l6p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3400000>; + }; + + ldo7 { + regulator-name = "vreg_l7p"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3400000>; + }; + }; + }; +}; + +&i2c16 { + status = "okay"; + + fuel-gauge@55 { + compatible = "ti,bq28z610"; + reg = <0x55>; + monitored-battery = <&battery>; + }; +}; + +&tlmm { + pm8008_default: pm8008-default-state { + pins = "gpio93"; + function = "gpio"; + bias-pull-up; + output-high; + drive-strength = <2>; + }; + + pm8008_interrupt: pm8008-interrupt { + pins = "gpio112"; + function = "gpio"; + bias-disable; + input-enable; + }; +}; + +&vreg_f { + status = "disabled"; +}; -- 2.54.0
