Add a devicetree for the Motorola One smartphone, which is based on the Jacala/MSM8953 SoC.
Supported functionality as of this initial submission: * I2C peripherals (Touchscreen,NFC) * Power Button, Volume Keys * Regulators (PM8953) * Remoteprocs (ADSP, MPSS, WCNSS) * USB Device tree also contains supply maps to other subsystems like MDSS but due to missing dependencies like panel those are disabled. Signed-off-by: Adam Skladowski <[email protected]> --- arch/arm64/boot/dts/qcom/Makefile | 1 + arch/arm64/boot/dts/qcom/msm8953-motorola-deen.dts | 460 +++++++++++++++++++++ 2 files changed, 461 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile index 1c86e7e98f55..11e953657691 100644 --- a/arch/arm64/boot/dts/qcom/Makefile +++ b/arch/arm64/boot/dts/qcom/Makefile @@ -120,6 +120,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8939-sony-xperia-kanuti-tulip.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-wingtech-wt82918.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8939-wingtech-wt82918hd.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-flipkart-rimob.dtb +dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-deen.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-motorola-potter.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-daisy.dtb dtb-$(CONFIG_ARCH_QCOM) += msm8953-xiaomi-mido.dtb diff --git a/arch/arm64/boot/dts/qcom/msm8953-motorola-deen.dts b/arch/arm64/boot/dts/qcom/msm8953-motorola-deen.dts new file mode 100644 index 000000000000..acb0b61b8f94 --- /dev/null +++ b/arch/arm64/boot/dts/qcom/msm8953-motorola-deen.dts @@ -0,0 +1,460 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/* + * Copyright (c) 2026 Adam Skladowski <[email protected]> + */ + +/dts-v1/; +#include <dt-bindings/usb/pd.h> +#include "msm8953.dtsi" +#include "pm8953.dtsi" +#include "pmi8950.dtsi" + +/delete-node/ &cont_splash_mem; +/delete-node/ &qseecom_mem; + +/ { + model = "Motorola One"; + compatible = "motorola,deen", "qcom,msm8953"; + chassis-type = "handset"; + + gpio-keys { + compatible = "gpio-keys"; + + pinctrl-0 = <&gpio_key_default>; + pinctrl-names = "default"; + + key-volume-up { + label = "Volume Up"; + gpios = <&tlmm 85 GPIO_ACTIVE_LOW>; + linux,code = <KEY_VOLUMEUP>; + }; + }; + + reserved-memory { + qseecom_mem: qseecom@84300000 { + reg = <0x0 0x84300000 0x0 0x2000000>; + no-map; + }; + }; + + vph_pwr: vph-pwr-regulator { + compatible = "regulator-fixed"; + regulator-name = "vph_pwr"; + regulator-always-on; + regulator-boot-on; + }; + + /* Fake VBUS 5V supply till we wire pmi8950 one */ + fusb302_vbus: otg-vbus { + compatible = "regulator-fixed"; + regulator-name = "otg-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; +}; + +&hsusb_phy { + vdd-supply = <&pm8953_l3>; + vdda-phy-dpdm-supply = <&pm8953_l13>; + vdda-pll-supply = <&pm8953_l7>; + + status = "okay"; +}; + +&i2c_1 { + status = "okay"; + + typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupts-extended = <&tlmm 9 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-names = "default"; + pinctrl-0 = <&fusb302_int_default>; + + usb-role-switch = <&usb3>; + vbus-supply = <&fusb302_vbus>; + + connector { + compatible = "usb-c-connector"; + label = "USB-C"; + power-role = "dual"; + data-role = "dual"; + try-power-role = "sink"; + typec-power-opmode = "default"; + source-pdos = <PDO_FIXED(5000, 500, + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_DATA_SWAP | + PDO_FIXED_USB_COMM)>; + sink-pdos = <PDO_FIXED(5000, 3000, + PDO_FIXED_DUAL_ROLE | + PDO_FIXED_DATA_SWAP | + PDO_FIXED_USB_COMM)>; + op-sink-microwatt = <2000000>; + + port { + fusb302: endpoint { + remote-endpoint = <&usb_dwc3_hs>; + }; + }; + }; + }; +}; + +&i2c_2 { + status = "okay"; +}; + +&i2c_3 { + status = "okay"; + + touchscreen@62 { + compatible = "novatek,nt36672a-ts"; + reg = <0x62>; + interrupts-extended = <&tlmm 65 IRQ_TYPE_EDGE_RISING>; + + reset-gpios = <&tlmm 64 GPIO_ACTIVE_HIGH>; + iovcc-supply = <&pm8953_l6>; + /* vcc-supply should follow lab from panel */ + + pinctrl-0 = <&ts_reset_default &ts_int_default>; + pinctrl-1 = <&ts_reset_sleep &ts_int_sleep>; + pinctrl-names = "default", "sleep"; + + touchscreen-size-x = <720>; + touchscreen-size-y = <1520>; + + status = "disabled"; + }; +}; + +&i2c_5 { + status = "okay"; + + pn553: nfc@28 { + compatible = "nxp,pn553", "nxp,nxp-nci-i2c"; + reg = <0x28>; + interrupts-extended = <&tlmm 17 IRQ_TYPE_LEVEL_HIGH>; + + enable-gpios = <&tlmm 16 GPIO_ACTIVE_HIGH>; + firmware-gpios = <&tlmm 62 GPIO_ACTIVE_HIGH>; + + pinctrl-0 = <&nfc_firm_default &nfc_irq_default &nfc_pwr_default>; + pinctrl-names = "default"; + }; +}; + +&ibb { + qcom,discharge-resistor-kohms = <32>; +}; + +&lpass { + status = "okay"; +}; + +&mdss_dsi0 { + vdda-supply = <&pm8953_s3>; + vddio-supply = <&pm8953_l6>; +}; + +&mdss_dsi0_out { + data-lanes = <0 1 2 3>; +}; + +&mdss_dsi0_phy { + vcca-supply = <&pm8953_l3>; +}; + +&mpss { + pll-supply = <&pm8953_l7>; + + status = "okay"; +}; + +&pm8953_resin { + linux,code = <KEY_VOLUMEDOWN>; + + status = "okay"; +}; + +&pmi8950_wled { + qcom,current-limit-microamp = <25000>; + qcom,num-strings = <2>; + + qcom,cabc; + qcom,external-pfet; +}; + +&q6afedai { + dai@22 { + reg = <QUATERNARY_MI2S_RX>; + qcom,sd-lines = <0>; + }; + + dai@127 { + reg = <QUINARY_MI2S_RX>; + qcom,sd-lines = <1>; + }; +}; + +&rpm_requests { + regulators { + compatible = "qcom,rpm-pm8953-regulators"; + vdd_s1-supply = <&vph_pwr>; + vdd_s2-supply = <&vph_pwr>; + vdd_s3-supply = <&vph_pwr>; + vdd_s4-supply = <&vph_pwr>; + vdd_s5-supply = <&vph_pwr>; + vdd_s6-supply = <&vph_pwr>; + vdd_s7-supply = <&vph_pwr>; + vdd_l1-supply = <&pm8953_s3>; + vdd_l2_l3-supply = <&pm8953_s3>; + vdd_l4_l5_l6_l7_l16_l19-supply = <&pm8953_s4>; + vdd_l8_l11_l12_l13_l14_l15-supply = <&vph_pwr>; + vdd_l9_l10_l17_l18_l22-supply = <&vph_pwr>; + vdd_l23-supply = <&pm8953_s3>; + + pm8953_s1: s1 { + regulator-min-microvolt = <863000>; + regulator-max-microvolt = <1152000>; + }; + + pm8953_s3: s3 { + regulator-min-microvolt = <1224000>; + regulator-max-microvolt = <1224000>; + }; + + pm8953_s4: s4 { + regulator-min-microvolt = <1896000>; + regulator-max-microvolt = <2048000>; + }; + + pm8953_l1: l1 { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1100000>; + }; + + pm8953_l2: l2 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + pm8953_l3: l3 { + regulator-min-microvolt = <925000>; + regulator-max-microvolt = <925000>; + regulator-allow-set-load; + }; + + pm8953_l5: l5 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l6: l6 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + pm8953_l7: l7 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1900000>; + }; + + pm8953_l8: l8 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l9: l9 { + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + }; + + pm8953_l10: l10 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l11: l11 { + regulator-min-microvolt = <2950000>; + regulator-max-microvolt = <2950000>; + regulator-allow-set-load; + regulator-system-load = <200000>; + }; + + pm8953_l12: l12 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + }; + + pm8953_l13: l13 { + regulator-min-microvolt = <3075000>; + regulator-max-microvolt = <3125000>; + }; + + pm8953_l15: l15 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l16: l16 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + pm8953_l17: l17 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; + }; + + pm8953_l19: l19 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1350000>; + }; + + pm8953_l22: l22 { + regulator-min-microvolt = <2900000>; + regulator-max-microvolt = <2900000>; + }; + + pm8953_l23: l23 { + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + }; +}; + +&sdhc_1 { + vmmc-supply = <&pm8953_l8>; + vqmmc-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&sdhc_2 { + cd-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; + + pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on &sdc2_cd_off>; + pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off &sdc2_cd_off>; + pinctrl-names = "default", "sleep"; + + vmmc-supply = <&pm8953_l11>; + vqmmc-supply = <&pm8953_l12>; + + status = "okay"; +}; + +&tlmm { + gpio-reserved-ranges = <96 4>; /* Fingerprint SPI */ + + disp_reset_n_active: disp-reset-n-active-state { + pins = "gpio61"; + function = "gpio"; + drive-strength = <8>; + bias-disable; + }; + + disp_reset_n_sleep: disp-reset-n-sleep-state { + pins = "gpio61"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + fusb302_int_default: fusb302-int-default-state { + pins = "gpio9"; + function = "gpio"; + drive-strength = <2>; + bias-pull-up; + }; + + mi2s_sec_act: mi2s-quat-active-state { + pins = "gpio135", "gpio136", "gpio137", "gpio138"; + function = "sec_mi2s"; + drive-strength = <8>; + }; + + mi2s_sec_sus: mi2s-quat-sleep-state { + pins = "gpio135", "gpio136", "gpio137", "gpio138"; + function = "sec_mi2s"; + drive-strength = <2>; + bias-pull-down; + }; + + nfc_firm_default: nfc-firm-state { + pins = "gpio62"; + function = "gpio"; + bias-pull-down; + output-low; + drive-strength = <2>; + }; + + nfc_irq_default: nfc-irq-state { + pins = "gpio17"; + function = "gpio"; + bias-pull-down; + drive-strength = <2>; + }; + + nfc_pwr_default: nfc-pwr-state { + pins = "gpio16"; + function = "gpio"; + bias-pull-down; + output-low; + drive-strength = <2>; + }; + + ts_int_default: ts-int-default-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_int_sleep: ts-int-sleep-state { + pins = "gpio65"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; + + ts_reset_default: ts-reset-default-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <8>; + bias-pull-up; + }; + + ts_reset_sleep: ts-reset-sleep-state { + pins = "gpio64"; + function = "gpio"; + drive-strength = <2>; + bias-pull-down; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb_dwc3_hs { + remote-endpoint = <&fusb302>; +}; + +&wcnss { + vddpx-supply = <&pm8953_l5>; + + status = "okay"; +}; + +&wcnss_iris { + compatible = "qcom,wcn3660b"; + + vdddig-supply = <&pm8953_l5>; + vddpa-supply = <&pm8953_l9>; + vddrfa-supply = <&pm8953_l19>; + vddxo-supply = <&pm8953_l7>; +}; -- 2.55.0
