From: David Heidelberg <[email protected]> Enable the PMI8998 flash LED block and describe two white flash LEDs used for the rear camera.
Configure the LED in flash mode with hardware limits matching the original device configuration, including maximum current and timeout. In contrary to downstream, we can control both LEDs separately. Reviewed-by: Konrad Dybcio <[email protected]> Signed-off-by: David Heidelberg <[email protected]> --- arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi | 27 ++++++++++++++++++++++ 1 file changed, 27 insertions(+) diff --git a/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi index c8a28133fb38d..8d35e33ef7aaf 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi @@ -1,16 +1,17 @@ // SPDX-License-Identifier: GPL-2.0-only /dts-v1/; #include <dt-bindings/arm/qcom,ids.h> #include <dt-bindings/dma/qcom-gpi.h> #include <dt-bindings/input/linux-event-codes.h> #include <dt-bindings/interrupt-controller/irq.h> +#include <dt-bindings/leds/common.h> #include <dt-bindings/media/video-interfaces.h> #include <dt-bindings/media/video-interface-devices.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "sdm845.dtsi" #include "pm8998.dtsi" #include "pmi8998.dtsi" @@ -591,16 +592,42 @@ &pm8998_resin { }; &pmi8998_charger { monitored-battery = <&battery>; status = "okay"; }; +&pmi8998_flash { + status = "okay"; + + /* upper part of the flash module */ + led-0 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <1>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <0>; + }; + + /* lower part of the flash module */ + led-1 { + function = LED_FUNCTION_FLASH; + color = <LED_COLOR_ID_WHITE>; + led-sources = <2>; + led-max-microamp = <500000>; + flash-max-microamp = <1500000>; + flash-max-timeout-us = <1280000>; + function-enumerator = <1>; + }; +}; + &qupv3_id_0 { status = "okay"; }; &qupv3_id_1 { status = "okay"; }; -- 2.53.0
