On 5/23/26 2:42 AM, Anisa Su wrote:
> From: Ira Weiny <[email protected]>
>
> Devices which optionally support Dynamic Capacity (DC) are configured
> via mailbox commands. CXL 3.2 section 9.13.3 requires the host to issue
4.0
> the Get DC Configuration command in order to properly configure DCDs.
> Without the Get DC Configuration command DCD can't be supported.
>
> Implement the DC mailbox commands as specified in CXL 3.2 section
4.0
> 8.2.10.9.9 (opcodes 48XXh) to read and store the DCD configuration
> information. Disable DCD if an invalid configuration is found.
>
> Linux has no support for more than one dynamic capacity partition. Read
> and validate all the partitions but configure only the first partition
> as 'dynamic ram A'. Additional partitions can be added in the future if
> such a device ever materializes. Additionally is it anticipated that no
> skips will be present from the end of the pmem partition. Check for an
> disallow this configuration as well.
>
> Linux has no use for the trailing fields of the Get Dynamic Capacity
> Configuration Output Payload (Total number of supported extents, number
> of available extents, total number of supported tags, and number of
> available tags). Avoid defining those fields to use the more useful
> dynamic C array.
>
> Based on an original patch by Navneet Singh.
>
> Signed-off-by: Ira Weiny <[email protected]>
Missing Anisa sign off
>
> ---
> Changes:
> [anisa: rebase]
> [jonathan: mbox.c: use max possible size for get_dc_config command to
> avoid vmalloc]
> [jonathan & fan: cxlmem.h: remove unused struct cxl_mem_dev_info]
> ---
> drivers/cxl/core/hdm.c | 2 +
> drivers/cxl/core/mbox.c | 182 ++++++++++++++++++++++++++++++++++++++++
> drivers/cxl/cxlmem.h | 47 +++++++++++
> drivers/cxl/pci.c | 3 +
> include/cxl/cxl.h | 3 +-
> 5 files changed, 236 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
> index 3930e130d6b6..28974adaab75 100644
> --- a/drivers/cxl/core/hdm.c
> +++ b/drivers/cxl/core/hdm.c
> @@ -453,6 +453,8 @@ static const char *cxl_mode_name(enum cxl_partition_mode
> mode)
> return "ram";
> case CXL_PARTMODE_PMEM:
> return "pmem";
> + case CXL_PARTMODE_DYNAMIC_RAM_A:
> + return "dynamic_ram_a";
> default:
> return "";
> };
> diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
> index 7ef5708bf210..71b29cd6abfe 100644
> --- a/drivers/cxl/core/mbox.c
> +++ b/drivers/cxl/core/mbox.c
> @@ -1351,6 +1351,156 @@ int cxl_mem_sanitize(struct cxl_memdev *cxlmd, u16
> cmd)
> return -EBUSY;
> }
>
> +static int cxl_dc_check(struct device *dev, struct cxl_dc_partition_info
> *part_array,
> + u8 index, struct cxl_dc_partition *dev_part)
> +{
> + size_t blk_size = le64_to_cpu(dev_part->block_size);
> + size_t len = le64_to_cpu(dev_part->length);
> +
> + part_array[index].start = le64_to_cpu(dev_part->base);
> + part_array[index].size = le64_to_cpu(dev_part->decode_length);
> + part_array[index].size *= CXL_CAPACITY_MULTIPLIER;
> +
> + /* Check partitions are in increasing DPA order */
> + if (index > 0) {
> + struct cxl_dc_partition_info *prev_part = &part_array[index -
> 1];
> +
> + if ((prev_part->start + prev_part->size) >
> + part_array[index].start) {
> + dev_err(dev,
> + "DPA ordering violation for DC partition %d and
> %d\n",
> + index - 1, index);
> + return -EINVAL;
> + }
> + }
> +
> + if (!IS_ALIGNED(part_array[index].start, SZ_256M) ||
> + !IS_ALIGNED(part_array[index].start, blk_size)) {
> + dev_err(dev, "DC partition %d invalid start %zu blk size %zu\n",
> + index, part_array[index].start, blk_size);
> + return -EINVAL;
> + }
> +
> + if (part_array[index].size == 0 || len == 0 ||
> + part_array[index].size < len || !IS_ALIGNED(len, blk_size)) {
> + dev_err(dev, "DC partition %d invalid length; size %zu len %zu
> blk size %zu\n",
> + index, part_array[index].size, len, blk_size);
> + return -EINVAL;
> + }
> +
> + if (blk_size == 0 || blk_size % CXL_DCD_BLOCK_LINE_SIZE ||
> + !is_power_of_2(blk_size)) {
> + dev_err(dev, "DC partition %d invalid block size; %zu\n",
size: instead of size;
> + index, blk_size);
> + return -EINVAL;
> + }
> +
> + dev_dbg(dev, "DC partition %d start %zu start %zu size %zu\n",
should it be "DC partition %d start %zu size %zu blk_size: %zu\n"?
> + index, part_array[index].start, part_array[index].size,
> + blk_size);
> +
> + return 0;
> +}
> +
> +/* Returns the number of partitions in dc_resp or -ERRNO */
> +static int cxl_get_dc_config(struct cxl_mailbox *mbox, u8 start_partition,
> + struct cxl_mbox_get_dc_config_out *dc_resp,
> + size_t dc_resp_size)
> +{
> + struct cxl_mbox_get_dc_config_in get_dc = (struct
> cxl_mbox_get_dc_config_in) {
> + .partition_count = CXL_MAX_DC_PARTITIONS,
> + .start_partition_index = start_partition,
> + };
> + struct cxl_mbox_cmd mbox_cmd = (struct cxl_mbox_cmd) {
> + .opcode = CXL_MBOX_OP_GET_DC_CONFIG,
> + .payload_in = &get_dc,
> + .size_in = sizeof(get_dc),
> + .size_out = dc_resp_size,
> + .payload_out = dc_resp,
> + .min_out = 8,
> + };
> + int rc;
> +
> + rc = cxl_internal_send_cmd(mbox, &mbox_cmd);
> + if (rc < 0)
> + return rc;
> +
> + dev_dbg(mbox->host, "Read %d/%d DC partitions\n",
> + dc_resp->partitions_returned, dc_resp->avail_partition_count);
> + return dc_resp->partitions_returned;
> +}
> +
> +/**
> + * cxl_dev_dc_identify() - Reads the dynamic capacity information from the
> + * device.
> + * @mbox: Mailbox to query
> + * @dc_info: The dynamic partition information to return
> + *
> + * Read Dynamic Capacity information from the device and return the partition
> + * information.
> + *
> + * Return: 0 if identify was executed successfully, -ERRNO on error.
> + * on error only dynamic_bytes is left unchanged.
> + */
> +int cxl_dev_dc_identify(struct cxl_mailbox *mbox,
> + struct cxl_dc_partition_info *dc_info)
> +{
> + struct cxl_dc_partition_info partitions[CXL_MAX_DC_PARTITIONS];
> + struct device *dev = mbox->host;
> + size_t dc_resp_size =
> + sizeof(struct cxl_mbox_get_dc_config_out) + sizeof(partitions);
I think it needs to be something like below because of the 'partition' flex
array:
size_t dc_resp_size = struct_size(dc_resp, partition, CXL_MAX_DC_PARTITIONS);
partitions is type 'struct cxl_dc_partition_info'. and dc_resp->partition is
type 'struct cxl_dc_partition'. So the size calucation is wrong. It should at
least be:
size_t dc_resp_size = sizeof(struct cxl_mbox_get_dc_config_out) + sizeof(struct
cxl_dc_partition) * CXL_MAX_DC_PARTITIONS;
> + u8 start_partition;
> + u8 num_partitions;
> +
> + struct cxl_mbox_get_dc_config_out *dc_resp __free(kfree) =
> + kmalloc(dc_resp_size, GFP_KERNEL);
> + if (!dc_resp)
> + return -ENOMEM;
> +
> + /**
/*
> + * Read and check all partition information for validity and potential
> + * debugging; see debug output in cxl_dc_check()
> + */
> + start_partition = 0;
> + num_partitions = 0;
> + do {
> + int rc, i, j;
> +
> + rc = cxl_get_dc_config(mbox, start_partition, dc_resp,
> dc_resp_size);
> + if (rc < 0) {
> + dev_err(dev, "Failed to get DC config: %d\n", rc);
> + return rc;
> + }
> +
> + num_partitions += rc;
Would cxl_get_dc_config() keep returning 0 be a problem? Not likely to happen
unless device is malicious.
> +
> + if (num_partitions < 1 || num_partitions >
> CXL_MAX_DC_PARTITIONS) {
> + dev_err(dev, "Invalid num of dynamic capacity
> partitions %d\n",
> + num_partitions);
> + return -EINVAL;
> + }
> +
> + for (i = start_partition, j = 0; i < num_partitions; i++, j++) {
> + rc = cxl_dc_check(dev, partitions, i,
> + &dc_resp->partition[j]);
> + if (rc)
> + return rc;
> + }
> +
> + start_partition = num_partitions;
> +
> + } while (num_partitions < dc_resp->avail_partition_count);
> +
> + /* Return 1st partition */
> + dc_info->start = partitions[0].start;
> + dc_info->size = partitions[0].size;
> + dev_dbg(dev, "Returning partition 0 %zu size %zu\n",
> + dc_info->start, dc_info->size);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_NS_GPL(cxl_dev_dc_identify, "CXL");
> +
> static void add_part(struct cxl_dpa_info *info, u64 start, u64 size, enum
> cxl_partition_mode mode)
> {
> int i = info->nr_partitions;
> @@ -1421,6 +1571,38 @@ int cxl_get_dirty_count(struct cxl_memdev_state *mds,
> u32 *count)
> }
> EXPORT_SYMBOL_NS_GPL(cxl_get_dirty_count, "CXL");
>
> +void cxl_configure_dcd(struct cxl_memdev_state *mds, struct cxl_dpa_info
> *info)
> +{
> + struct cxl_dc_partition_info dc_info = { 0 };
> + struct device *dev = mds->cxlds.dev;
> + size_t skip;
> + int rc;
> +
> + rc = cxl_dev_dc_identify(&mds->cxlds.cxl_mbox, &dc_info);
> + if (rc) {
> + dev_warn(dev,
> + "Failed to read Dynamic Capacity config: %d\n", rc);
> + cxl_disable_dcd(mds);
> + return;
> + }
> +
> + /* Skips between pmem and the dynamic partition are not supported */
> + skip = dc_info.start - info->size;
> + if (skip) {
Would this be sufficient?
if (dc_info.start != info->size)
DJ
> + dev_warn(dev,
> + "Dynamic Capacity skip from pmem not supported: %zu\n",
> + skip);
> + cxl_disable_dcd(mds);
> + return;
> + }
> +
> + info->size += dc_info.size;
> + dev_dbg(dev, "Adding dynamic ram partition A; %zu size %zu\n",
> + dc_info.start, dc_info.size);
> + add_part(info, dc_info.start, dc_info.size, CXL_PARTMODE_DYNAMIC_RAM_A);
> +}
> +EXPORT_SYMBOL_NS_GPL(cxl_configure_dcd, "CXL");
> +
> int cxl_arm_dirty_shutdown(struct cxl_memdev_state *mds)
> {
> struct cxl_mailbox *cxl_mbox = &mds->cxlds.cxl_mbox;
> diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
> index 53444af448d7..87386488ad10 100644
> --- a/drivers/cxl/cxlmem.h
> +++ b/drivers/cxl/cxlmem.h
> @@ -380,6 +380,8 @@ struct cxl_security_state {
> struct kernfs_node *sanitize_node;
> };
>
> +#define CXL_MAX_DC_PARTITIONS 8
> +
> static inline resource_size_t cxl_pmem_size(struct cxl_dev_state *cxlds)
> {
> /*
> @@ -664,6 +666,31 @@ struct cxl_mbox_set_shutdown_state_in {
> u8 state;
> } __packed;
>
> +/* See CXL 3.2 Table 8-178 get dynamic capacity config Input Payload */
> +struct cxl_mbox_get_dc_config_in {
> + u8 partition_count;
> + u8 start_partition_index;
> +} __packed;
> +
> +/* See CXL 3.2 Table 8-179 get dynamic capacity config Output Payload */
> +struct cxl_mbox_get_dc_config_out {
> + u8 avail_partition_count;
> + u8 partitions_returned;
> + u8 rsvd[6];
> + /* See CXL 3.2 Table 8-180 */
> + struct cxl_dc_partition {
> + __le64 base;
> + __le64 decode_length;
> + __le64 length;
> + __le64 block_size;
> + __le32 dsmad_handle;
> + u8 flags;
> + u8 rsvd[3];
> + } __packed partition[] __counted_by(partitions_returned);
> + /* Trailing fields unused */
> +} __packed;
> +#define CXL_DCD_BLOCK_LINE_SIZE 0x40
> +
> /* Set Timestamp CXL 3.0 Spec 8.2.9.4.2 */
> struct cxl_mbox_set_timestamp_in {
> __le64 timestamp;
> @@ -787,9 +814,18 @@ enum {
> int cxl_internal_send_cmd(struct cxl_mailbox *cxl_mbox,
> struct cxl_mbox_cmd *cmd);
> int cxl_dev_state_identify(struct cxl_memdev_state *mds);
> +
> +struct cxl_dc_partition_info {
> + size_t start;
> + size_t size;
> +};
> +
> +int cxl_dev_dc_identify(struct cxl_mailbox *mbox,
> + struct cxl_dc_partition_info *dc_info);
> int cxl_await_media_ready(struct cxl_dev_state *cxlds);
> int cxl_enumerate_cmds(struct cxl_memdev_state *mds);
> int cxl_mem_dpa_fetch(struct cxl_memdev_state *mds, struct cxl_dpa_info
> *info);
> +void cxl_configure_dcd(struct cxl_memdev_state *mds, struct cxl_dpa_info
> *info);
> struct cxl_memdev_state *cxl_memdev_state_create(struct device *dev, u64
> serial,
> u16 dvsec);
> void set_exclusive_cxl_commands(struct cxl_memdev_state *mds,
> @@ -803,6 +839,17 @@ void cxl_event_trace_record(struct cxl_memdev *cxlmd,
> const uuid_t *uuid, union cxl_event *evt);
> int cxl_get_dirty_count(struct cxl_memdev_state *mds, u32 *count);
> int cxl_arm_dirty_shutdown(struct cxl_memdev_state *mds);
> +
> +static inline bool cxl_dcd_supported(struct cxl_memdev_state *mds)
> +{
> + return mds->dcd_supported;
> +}
> +
> +static inline void cxl_disable_dcd(struct cxl_memdev_state *mds)
> +{
> + mds->dcd_supported = false;
> +}
> +
> int cxl_set_timestamp(struct cxl_memdev_state *mds);
> int cxl_poison_state_init(struct cxl_memdev_state *mds);
> int cxl_mem_get_poison(struct cxl_memdev *cxlmd, u64 offset, u64 len,
> diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> index bace662dc988..60f9fa05d9ef 100644
> --- a/drivers/cxl/pci.c
> +++ b/drivers/cxl/pci.c
> @@ -870,6 +870,9 @@ static int cxl_pci_probe(struct pci_dev *pdev, const
> struct pci_device_id *id)
> if (rc)
> return rc;
>
> + if (cxl_dcd_supported(mds))
> + cxl_configure_dcd(mds, &range_info);
> +
> rc = cxl_dpa_setup(cxlds, &range_info);
> if (rc)
> return rc;
> diff --git a/include/cxl/cxl.h b/include/cxl/cxl.h
> index fa7269154620..bb1df0cef863 100644
> --- a/include/cxl/cxl.h
> +++ b/include/cxl/cxl.h
> @@ -133,6 +133,7 @@ struct cxl_dpa_perf {
> enum cxl_partition_mode {
> CXL_PARTMODE_RAM,
> CXL_PARTMODE_PMEM,
> + CXL_PARTMODE_DYNAMIC_RAM_A,
> };
>
> /**
> @@ -147,7 +148,7 @@ struct cxl_dpa_partition {
> enum cxl_partition_mode mode;
> };
>
> -#define CXL_NR_PARTITIONS_MAX 2
> +#define CXL_NR_PARTITIONS_MAX 3
>
> /**
> * struct cxl_dev_state - The driver device state
