Document the component used to boot SoCCP on Kaanapali SoC and add compatible for Glymur SoCCP which could fallback to Kaanapali. Extend the "qcom,smem-states", "qcom,smem-state-names" in the pas-common and add maxItems constraints for SMEM properties in the documents that reference to pas-common.
Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Jingyi Wang <[email protected]> --- .../devicetree/bindings/remoteproc/qcom,adsp.yaml | 8 ++ .../remoteproc/qcom,kaanapali-soccp-pas.yaml | 154 +++++++++++++++++++++ .../bindings/remoteproc/qcom,milos-pas.yaml | 8 ++ .../bindings/remoteproc/qcom,pas-common.yaml | 6 +- .../bindings/remoteproc/qcom,qcs404-pas.yaml | 8 ++ .../bindings/remoteproc/qcom,sa8775p-pas.yaml | 8 ++ .../bindings/remoteproc/qcom,sc7180-pas.yaml | 8 ++ .../bindings/remoteproc/qcom,sc8280xp-pas.yaml | 8 ++ .../bindings/remoteproc/qcom,sdx55-pas.yaml | 8 ++ .../bindings/remoteproc/qcom,sm6115-pas.yaml | 8 ++ .../bindings/remoteproc/qcom,sm6350-pas.yaml | 8 ++ .../bindings/remoteproc/qcom,sm6375-pas.yaml | 8 ++ .../bindings/remoteproc/qcom,sm8150-pas.yaml | 8 ++ .../bindings/remoteproc/qcom,sm8350-pas.yaml | 8 ++ .../bindings/remoteproc/qcom,sm8550-pas.yaml | 8 ++ 15 files changed, 263 insertions(+), 1 deletion(-) diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml index 16c35e15ee1b..7e8ecae8e6cb 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,adsp.yaml @@ -73,6 +73,14 @@ properties: - const: handover - const: stop-ack + qcom,smem-states: + maxItems: 1 + description: States used by the AP to signal the Hexagon core + + qcom,smem-state-names: + maxItems: 1 + description: The names of the state bits used for SMP2P output + required: - compatible - memory-region diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,kaanapali-soccp-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,kaanapali-soccp-pas.yaml new file mode 100644 index 000000000000..ce18460a949f --- /dev/null +++ b/Documentation/devicetree/bindings/remoteproc/qcom,kaanapali-soccp-pas.yaml @@ -0,0 +1,154 @@ +# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/remoteproc/qcom,kaanapali-soccp-pas.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Kaanapali SoCCP Peripheral Authentication Service + +maintainers: + - Jingyi Wang <[email protected]> + +description: + The SoC Control Processor (SoCCP) is a small RISC-V MCU that controls USB + Type-C, battery charging and various other functions on Qualcomm SoCs, somewhat + analogous to traditional PC Embedded Controllers. This document describes + the Peripheral Authentication Service that loads and boots firmware for SoCCP. + +properties: + compatible: + oneOf: + - items: + - enum: + - qcom,glymur-soccp-pas + - const: qcom,kaanapali-soccp-pas + - enum: + - qcom,kaanapali-soccp-pas + + reg: + maxItems: 1 + + clocks: + items: + - description: XO clock + + clock-names: + items: + - const: xo + + power-domains: + items: + - description: CX power domain + - description: MX power domain + + power-domain-names: + items: + - const: cx + - const: mx + + firmware-name: + items: + - description: Firmware name of the SoC Control Processor + - description: Firmware name of the SoCCP Devicetree + + memory-region: + items: + - description: Memory region for main Firmware authentication + - description: Memory region for Devicetree Firmware authentication + + interrupts: + items: + - description: Watchdog interrupt + - description: Fatal interrupt + - description: Ready interrupt + - description: Handover interrupt + - description: Stop acknowledge interrupt + - description: Pong interrupt + + interrupt-names: + items: + - const: wdog + - const: fatal + - const: ready + - const: handover + - const: stop-ack + - const: pong + + qcom,smem-states: + minItems: 2 + description: States used by the AP to signal the SoC Control Processor + + qcom,smem-state-names: + minItems: 2 + description: The names of the state bits used for SMP2P output + +required: + - compatible + - reg + - memory-region + - power-domains + - power-domain-names + +allOf: + - $ref: /schemas/remoteproc/qcom,pas-common.yaml# + +unevaluatedProperties: false + +examples: + - | + #include <dt-bindings/clock/qcom,rpmh.h> + #include <dt-bindings/interrupt-controller/arm-gic.h> + #include <dt-bindings/interrupt-controller/irq.h> + #include <dt-bindings/mailbox/qcom-ipcc.h> + #include <dt-bindings/power/qcom-rpmpd.h> + #define IPCC_MPROC_SOCCP + + remoteproc@d00000 { + compatible = "qcom,kaanapali-soccp-pas"; + reg = <0x00d00000 0x200000>; + + clocks = <&rpmhcc RPMH_CXO_CLK>; + clock-names = "xo"; + + interrupts-extended = <&intc GIC_SPI 167 IRQ_TYPE_EDGE_RISING>, + <&soccp_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, + <&soccp_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, + <&soccp_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, + <&soccp_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, + <&soccp_smp2p_in 9 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "wdog", + "fatal", + "ready", + "handover", + "stop-ack", + "pong"; + + memory-region = <&soccp_mem>, + <&soccp_dtb_mem_mem>; + + firmware-name = "qcom/kaanapali/soccp.mbn", + "qcom/kaanapali/soccp_dtb.mbn"; + + power-domains = <&rpmhpd RPMHPD_CX>, + <&rpmhpd RPMHPD_MX>; + power-domain-names = "cx", + "mx"; + + qcom,smem-states = <&soccp_smp2p_out 0>, + <&soccp_smp2p_out 8>; + qcom,smem-state-names = "stop", + "ping"; + + glink-edge { + interrupts-extended = <&ipcc IPCC_MPROC_SOCCP + IPCC_MPROC_SIGNAL_GLINK_QMP + IRQ_TYPE_EDGE_RISING>; + mboxes = <&ipcc IPCC_MPROC_SOCCP + IPCC_MPROC_SIGNAL_GLINK_QMP>; + + label = "soccp"; + qcom,remote-pid = <19>; + + /* ... */ + }; + }; diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,milos-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,milos-pas.yaml index d22d50c1e1ea..99d7337e58ec 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,milos-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,milos-pas.yaml @@ -69,6 +69,14 @@ properties: - description: Memory region for core Firmware authentication - description: Memory region for Devicetree Firmware authentication + qcom,smem-states: + maxItems: 1 + description: States used by the AP to signal the Hexagon core + + qcom,smem-state-names: + maxItems: 1 + description: The names of the state bits used for SMP2P output + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml index dc5a9981c12c..e81ef400555a 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,pas-common.yaml @@ -46,13 +46,17 @@ properties: qcom,smem-states: $ref: /schemas/types.yaml#/definitions/phandle-array description: States used by the AP to signal the Hexagon core + minItems: 1 items: - - description: Stop the modem + - description: Stop the remoteproc + - description: ping the remoteproc qcom,smem-state-names: description: The names of the state bits used for SMP2P output + minItems: 1 items: - const: stop + - const: ping smd-edge: $ref: /schemas/remoteproc/qcom,smd-edge.yaml# diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml index 5854b3d2041d..bf9bf1af9ff1 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,qcs404-pas.yaml @@ -59,6 +59,14 @@ properties: maxItems: 1 description: Firmware name for the Hexagon core + qcom,smem-states: + maxItems: 1 + description: States used by the AP to signal the Hexagon core + + qcom,smem-state-names: + maxItems: 1 + description: The names of the state bits used for SMP2P output + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sa8775p-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sa8775p-pas.yaml index 7f287e55896e..dda2d144b720 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sa8775p-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sa8775p-pas.yaml @@ -74,6 +74,14 @@ properties: - const: handover - const: stop-ack + qcom,smem-states: + maxItems: 1 + description: States used by the AP to signal the Hexagon core + + qcom,smem-state-names: + maxItems: 1 + description: The names of the state bits used for SMP2P output + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml index cb0a61fc301d..b20780e5e26b 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc7180-pas.yaml @@ -68,6 +68,14 @@ properties: - const: stop-ack - const: shutdown-ack + qcom,smem-states: + maxItems: 1 + description: States used by the AP to signal the Hexagon core + + qcom,smem-state-names: + maxItems: 1 + description: The names of the state bits used for SMP2P output + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml index fef9d7c39f3c..4bbe4a986c7c 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sc8280xp-pas.yaml @@ -65,6 +65,14 @@ properties: - const: stop-ack - const: shutdown-ack + qcom,smem-states: + maxItems: 1 + description: States used by the AP to signal the Hexagon core + + qcom,smem-state-names: + maxItems: 1 + description: The names of the state bits used for SMP2P output + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sdx55-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sdx55-pas.yaml index 2bbd427c6ea4..8c16b01c53e4 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sdx55-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sdx55-pas.yaml @@ -71,6 +71,14 @@ properties: maxItems: 1 description: Firmware name for the Hexagon core + qcom,smem-states: + maxItems: 1 + description: States used by the AP to signal the Hexagon core + + qcom,smem-state-names: + maxItems: 1 + description: The names of the state bits used for SMP2P output + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml index 987fac433fae..454ba82bd6f1 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6115-pas.yaml @@ -71,6 +71,14 @@ properties: - const: stop-ack - const: shutdown-ack + qcom,smem-states: + maxItems: 1 + description: States used by the AP to signal the Hexagon core + + qcom,smem-state-names: + maxItems: 1 + description: The names of the state bits used for SMP2P output + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml index 53ffb1ccd199..42e02c64347a 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6350-pas.yaml @@ -65,6 +65,14 @@ properties: - const: stop-ack - const: shutdown-ack + qcom,smem-states: + maxItems: 1 + description: States used by the AP to signal the Hexagon core + + qcom,smem-state-names: + maxItems: 1 + description: The names of the state bits used for SMP2P output + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml index 6823a2a8d74e..274f87880e2e 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm6375-pas.yaml @@ -61,6 +61,14 @@ properties: smd-edge: false + qcom,smem-states: + maxItems: 1 + description: States used by the AP to signal the Hexagon core + + qcom,smem-state-names: + maxItems: 1 + description: The names of the state bits used for SMP2P output + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml index 8a1fae095a3b..5a7c5f8c92d1 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8150-pas.yaml @@ -81,6 +81,14 @@ properties: - const: stop-ack - const: shutdown-ack + qcom,smem-states: + maxItems: 1 + description: States used by the AP to signal the Hexagon core + + qcom,smem-state-names: + maxItems: 1 + description: The names of the state bits used for SMP2P output + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml index 4ea7518db537..72d0db5698c5 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8350-pas.yaml @@ -75,6 +75,14 @@ properties: - const: stop-ack - const: shutdown-ack + qcom,smem-states: + maxItems: 1 + description: States used by the AP to signal the Hexagon core + + qcom,smem-state-names: + maxItems: 1 + description: The names of the state bits used for SMP2P output + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml index 74df49b5fbe9..0b44141d31ee 100644 --- a/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml +++ b/Documentation/devicetree/bindings/remoteproc/qcom,sm8550-pas.yaml @@ -93,6 +93,14 @@ properties: - const: stop-ack - const: shutdown-ack + qcom,smem-states: + maxItems: 1 + description: States used by the AP to signal the Hexagon core + + qcom,smem-state-names: + maxItems: 1 + description: The names of the state bits used for SMP2P output + required: - compatible - reg -- 2.34.1
