On 4/14/2026 4:46 PM, Konrad Dybcio wrote:
On 4/13/26 8:55 PM, Antony Kurniawan Soemardi via B4 Relay wrote:
From: Antony Kurniawan Soemardi <[email protected]>
Add the Secure Channel Manager firmware device node to the MSM8960
device tree. The SCM is required for secure communication between the
application processor and other subsystems.
Tested-by: Rudraksha Gupta <[email protected]>
Signed-off-by: Antony Kurniawan Soemardi <[email protected]>
---
arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
index 1d5e97b6aa4b..bc3fd55e524a 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
+++ b/arch/arm/boot/dts/qcom/qcom-msm8960.dtsi
@@ -77,6 +77,15 @@ l2: l2-cache {
};
};
+ firmware {
+ scm {
+ compatible = "qcom,scm-msm8960", "qcom,scm";
+
+ clocks = <&rpmcc RPM_DAYTONA_FABRIC_CLK>;
I'm wondering if this should be an interconnect resource, but from a
quick grepping, I think this is always supposed to be @ 64 MHz so
perhaps not really
(please tell me if you know more)
Unfortunately I don't know either, this was ported as is from
qcom-apq8064.dtsi.
--
Thanks,
Antony K. S.
