On 2/16/26 10:54, Luca Weiss wrote:
Add bindings for the Camera Subsystem on the SM6350 SoC.Reviewed-by: Krzysztof Kozlowski <[email protected]> Signed-off-by: Luca Weiss <[email protected]> --- .../bindings/media/qcom,sm6350-camss.yaml | 471 +++++++++++++++++++++ 1 file changed, 471 insertions(+) diff --git a/Documentation/devicetree/bindings/media/qcom,sm6350-camss.yaml b/Documentation/devicetree/bindings/media/qcom,sm6350-camss.yaml new file mode 100644 index 000000000000..96974d90d8c4 --- /dev/null +++ b/Documentation/devicetree/bindings/media/qcom,sm6350-camss.yaml @@ -0,0 +1,471 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/media/qcom,sm6350-camss.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm SM6350 Camera Subsystem (CAMSS) + +maintainers: + - Luca Weiss <[email protected]> + +description: + The CAMSS IP is a CSI decoder and ISP present on Qualcomm platforms. + +properties: + compatible: + const: qcom,sm6350-camss + + reg: + maxItems: 24 + + reg-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid_lite + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: vfe0 + - const: vfe1 + - const: vfe2 + - const: vfe_lite + - const: a5_csr + - const: a5_qgic + - const: a5_sierra + - const: bps + - const: camnoc + - const: core_top_csr_tcsr + - const: cpas_cdm + - const: cpas_top + - const: ipe + - const: jpeg_dma + - const: jpeg_enc + - const: lrme + + clocks: + maxItems: 39 + + clock-names: + items: + - const: cam_axi + - const: soc_ahb + - const: camnoc_axi + - const: core_ahb + - const: cpas_ahb + - const: csiphy0 + - const: csiphy0_timer + - const: csiphy1 + - const: csiphy1_timer + - const: csiphy2 + - const: csiphy2_timer + - const: csiphy3 + - const: csiphy3_timer + - const: vfe0_axi + - const: vfe0 + - const: vfe0_cphy_rx + - const: vfe0_csid + - const: vfe1_axi + - const: vfe1 + - const: vfe1_cphy_rx + - const: vfe1_csid + - const: vfe2_axi + - const: vfe2 + - const: vfe2_cphy_rx + - const: vfe2_csid + - const: vfe_lite + - const: vfe_lite_cphy_rx + - const: vfe_lite_csid + - const: bps + - const: bps_ahb + - const: bps_areg + - const: bps_axi + - const: icp + - const: ipe0 + - const: ipe0_ahb + - const: ipe0_areg + - const: ipe0_axi + - const: jpeg + - const: lrme + + interrupts: + maxItems: 18 + + interrupt-names: + items: + - const: csid0 + - const: csid1 + - const: csid2 + - const: csid_lite + - const: csiphy0 + - const: csiphy1 + - const: csiphy2 + - const: csiphy3 + - const: vfe0 + - const: vfe1 + - const: vfe2 + - const: vfe_lite + - const: a5 + - const: cpas + - const: cpas_cdm + - const: jpeg_dma + - const: jpeg_enc + - const: lrme + + interconnects: + maxItems: 4 + + interconnect-names: + items: + - const: ahb + - const: hf_mnoc + - const: sf_mnoc + - const: sf_icp_mnoc + + iommus: + maxItems: 14 + + power-domains: + maxItems: 6 + + power-domain-names: + items: + - const: ife0 + - const: ife1 + - const: ife2 + - const: top + - const: bps + - const: ipe
I've lost the content, why 'top' is somewhere in the middle?
+
+ vdd-csiphy0-0p9-supply:
+ description:
+ Phandle to a 0.9V regulator supply to CSIPHY0.
+
+ vdd-csiphy0-1p25-supply:
+ description:
+ Phandle to a 1.25V regulator supply to CSIPHY0.
+
+ vdd-csiphy1-0p9-supply:
+ description:
+ Phandle to a 0.9V regulator supply to CSIPHY1.
+
+ vdd-csiphy1-1p25-supply:
+ description:
+ Phandle to a 1.25V regulator supply to CSIPHY1.
+
+ vdd-csiphy2-0p9-supply:
+ description:
+ Phandle to a 0.9V regulator supply to CSIPHY2.
+
+ vdd-csiphy2-1p25-supply:
+ description:
+ Phandle to a 1.25V regulator supply to CSIPHY2.
+
+ vdd-csiphy3-0p9-supply:
+ description:
+ Phandle to a 0.9V regulator supply to CSIPHY3.
+
+ vdd-csiphy3-1p25-supply:
+ description:
+ Phandle to a 1.25V regulator supply to CSIPHY3.
+
+ ports:
+ $ref: /schemas/graph.yaml#/properties/ports
+
+ description:
+ CSI input ports.
+
+ patternProperties:
+ "^port@[0-3]$":
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ unevaluatedProperties: false
+
+ description:
+ Input port for receiving CSI data from a CSIPHY.
+
+ properties:
+ endpoint:
+ $ref: video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ minItems: 1
+ maxItems: 4
+
+ bus-type:
+ enum:
+ - 1 # MEDIA_BUS_TYPE_CSI2_CPHY
+ - 4 # MEDIA_BUS_TYPE_CSI2_DPHY
+
+ required:
+ - data-lanes
+
+required:
+ - compatible
+ - reg
+ - reg-names
+ - clocks
+ - clock-names
+ - interrupts
+ - interrupt-names
+ - interconnects
+ - interconnect-names
+ - iommus
+ - power-domains
+ - power-domain-names
+ - ports
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/qcom,gcc-sm6350.h>
+ #include <dt-bindings/clock/qcom,sm6350-camcc.h>
+ #include <dt-bindings/interconnect/qcom,icc.h>
+ #include <dt-bindings/interconnect/qcom,sm6350.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/media/video-interfaces.h>
+ #include <dt-bindings/power/qcom-rpmpd.h>
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ isp@acb3000 {
+ compatible = "qcom,sm6350-camss";
+
+ reg = <0x0 0x0acb3000 0x0 0x1000>,
+ <0x0 0x0acba000 0x0 0x1000>,
+ <0x0 0x0acc1000 0x0 0x1000>,
+ <0x0 0x0acc8000 0x0 0x1000>,
+ <0x0 0x0ac65000 0x0 0x1000>,
+ <0x0 0x0ac66000 0x0 0x1000>,
+ <0x0 0x0ac67000 0x0 0x1000>,
+ <0x0 0x0ac68000 0x0 0x1000>,
+ <0x0 0x0acaf000 0x0 0x4000>,
+ <0x0 0x0acb6000 0x0 0x4000>,
+ <0x0 0x0acbd000 0x0 0x4000>,
+ <0x0 0x0acc4000 0x0 0x4000>,
+ <0x0 0x0ac18000 0x0 0x3000>,
+ <0x0 0x0ac00000 0x0 0x6000>,
+ <0x0 0x0ac10000 0x0 0x8000>,
+ <0x0 0x0ac6f000 0x0 0x8000>,
+ <0x0 0x0ac42000 0x0 0x4600>,
+ <0x0 0x01fc0000 0x0 0x40000>,
+ <0x0 0x0ac48000 0x0 0x1000>,
+ <0x0 0x0ac40000 0x0 0x1000>,
+ <0x0 0x0ac87000 0x0 0xa000>,
+ <0x0 0x0ac52000 0x0 0x4000>,
+ <0x0 0x0ac4e000 0x0 0x4000>,
+ <0x0 0x0ac6b000 0x0 0xa00>;
+ reg-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite",
+ "a5_csr",
+ "a5_qgic",
+ "a5_sierra",
+ "bps",
+ "camnoc",
+ "core_top_csr_tcsr",
+ "cpas_cdm",
+ "cpas_top",
+ "ipe",
+ "jpeg_dma",
+ "jpeg_enc",
+ "lrme";
+
+ clocks = <&gcc GCC_CAMERA_AXI_CLK>,
+ <&camcc CAMCC_SOC_AHB_CLK>,
+ <&camcc CAMCC_CAMNOC_AXI_CLK>,
+ <&camcc CAMCC_CORE_AHB_CLK>,
+ <&camcc CAMCC_CPAS_AHB_CLK>,
+ <&camcc CAMCC_CSIPHY0_CLK>,
+ <&camcc CAMCC_CSI0PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY1_CLK>,
+ <&camcc CAMCC_CSI1PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY2_CLK>,
+ <&camcc CAMCC_CSI2PHYTIMER_CLK>,
+ <&camcc CAMCC_CSIPHY3_CLK>,
+ <&camcc CAMCC_CSI3PHYTIMER_CLK>,
+ <&camcc CAMCC_IFE_0_AXI_CLK>,
+ <&camcc CAMCC_IFE_0_CLK>,
+ <&camcc CAMCC_IFE_0_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_0_CSID_CLK>,
+ <&camcc CAMCC_IFE_1_AXI_CLK>,
+ <&camcc CAMCC_IFE_1_CLK>,
+ <&camcc CAMCC_IFE_1_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_1_CSID_CLK>,
+ <&camcc CAMCC_IFE_2_AXI_CLK>,
+ <&camcc CAMCC_IFE_2_CLK>,
+ <&camcc CAMCC_IFE_2_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_2_CSID_CLK>,
+ <&camcc CAMCC_IFE_LITE_CLK>,
+ <&camcc CAMCC_IFE_LITE_CPHY_RX_CLK>,
+ <&camcc CAMCC_IFE_LITE_CSID_CLK>,
+ <&camcc CAMCC_BPS_CLK>,
+ <&camcc CAMCC_BPS_AHB_CLK>,
+ <&camcc CAMCC_BPS_AREG_CLK>,
+ <&camcc CAMCC_BPS_AXI_CLK>,
+ <&camcc CAMCC_ICP_CLK>,
+ <&camcc CAMCC_IPE_0_CLK>,
+ <&camcc CAMCC_IPE_0_AHB_CLK>,
+ <&camcc CAMCC_IPE_0_AREG_CLK>,
+ <&camcc CAMCC_IPE_0_AXI_CLK>,
+ <&camcc CAMCC_JPEG_CLK>,
+ <&camcc CAMCC_LRME_CLK>;
+ clock-names = "cam_axi",
+ "soc_ahb",
+ "camnoc_axi",
+ "core_ahb",
+ "cpas_ahb",
+ "csiphy0",
+ "csiphy0_timer",
+ "csiphy1",
+ "csiphy1_timer",
+ "csiphy2",
+ "csiphy2_timer",
+ "csiphy3",
+ "csiphy3_timer",
+ "vfe0_axi",
+ "vfe0",
+ "vfe0_cphy_rx",
+ "vfe0_csid",
+ "vfe1_axi",
+ "vfe1",
+ "vfe1_cphy_rx",
+ "vfe1_csid",
+ "vfe2_axi",
+ "vfe2",
+ "vfe2_cphy_rx",
+ "vfe2_csid",
+ "vfe_lite",
+ "vfe_lite_cphy_rx",
+ "vfe_lite_csid",
+ "bps",
+ "bps_ahb",
+ "bps_areg",
+ "bps_axi",
+ "icp",
+ "ipe0",
+ "ipe0_ahb",
+ "ipe0_areg",
+ "ipe0_axi",
+ "jpeg",
+ "lrme";
+
+ interrupts = <GIC_SPI 464 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 466 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 717 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 473 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 477 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 478 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 479 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 461 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 465 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 467 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 718 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 472 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 463 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 459 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 469 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 475 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 474 IRQ_TYPE_EDGE_RISING>,
+ <GIC_SPI 476 IRQ_TYPE_EDGE_RISING>;
+ interrupt-names = "csid0",
+ "csid1",
+ "csid2",
+ "csid_lite",
+ "csiphy0",
+ "csiphy1",
+ "csiphy2",
+ "csiphy3",
+ "vfe0",
+ "vfe1",
+ "vfe2",
+ "vfe_lite",
+ "a5",
+ "cpas",
+ "cpas_cdm",
+ "jpeg_dma",
+ "jpeg_enc",
+ "lrme";
+
+ interconnects = <&gem_noc MASTER_AMPSS_M0 QCOM_ICC_TAG_ACTIVE_ONLY
+ &config_noc SLAVE_CAMERA_CFG
QCOM_ICC_TAG_ACTIVE_ONLY>,
+ <&mmss_noc MASTER_CAMNOC_HF QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc MASTER_CAMNOC_SF QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>,
+ <&mmss_noc MASTER_CAMNOC_ICP QCOM_ICC_TAG_ALWAYS
+ &clk_virt SLAVE_EBI_CH0 QCOM_ICC_TAG_ALWAYS>;
+ interconnect-names = "ahb",
+ "hf_mnoc",
+ "sf_mnoc",
+ "sf_icp_mnoc";
+
+ iommus = <&apps_smmu 0x820 0xc0>,
+ <&apps_smmu 0x840 0x0>,
+ <&apps_smmu 0x860 0xc0>,
+ <&apps_smmu 0x880 0x0>,
+ <&apps_smmu 0xc40 0x20>,
+ <&apps_smmu 0xc60 0x20>,
+ <&apps_smmu 0xc80 0x0>,
+ <&apps_smmu 0xca2 0x0>,
+ <&apps_smmu 0xcc0 0x20>,
+ <&apps_smmu 0xce0 0x20>,
+ <&apps_smmu 0xd00 0x20>,
+ <&apps_smmu 0xd20 0x20>,
+ <&apps_smmu 0xd40 0x20>,
+ <&apps_smmu 0xd60 0x20>;
+
+ power-domains = <&camcc IFE_0_GDSC>,
+ <&camcc IFE_1_GDSC>,
+ <&camcc IFE_2_GDSC>,
+ <&camcc TITAN_TOP_GDSC>,
+ <&camcc BPS_GDSC>,
+ <&camcc IPE_0_GDSC>;
+ power-domain-names = "ife0",
+ "ife1",
+ "ife2",
+ "top",
+ "bps",
+ "ipe";
+
+ vdd-csiphy0-0p9-supply = <&vreg_l18a>;
+ vdd-csiphy0-1p25-supply = <&vreg_l22a>;
+ vdd-csiphy1-0p9-supply = <&vreg_l18a>;
+ vdd-csiphy1-1p25-supply = <&vreg_l22a>;
+ vdd-csiphy2-0p9-supply = <&vreg_l18a>;
+ vdd-csiphy2-1p25-supply = <&vreg_l22a>;
+ vdd-csiphy3-0p9-supply = <&vreg_l18a>;
+ vdd-csiphy3-1p25-supply = <&vreg_l22a>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+
+ csiphy0_ep: endpoint {
+ data-lanes = <0 1 2 3>;
+ bus-type = <MEDIA_BUS_TYPE_CSI2_DPHY>;
+ remote-endpoint = <&sensor_ep>;
+ };
+ };
+ };
+ };
+ };
Because CAMSS device tree nodes are far from being settled down, one more time I can just express my opinion that there is no good enough reason to describe all clocks and interconnects prematurely, anyway Reviewed-by: Vladimir Zapolskiy <[email protected]> -- Best wishes, Vladimir
