On 3/6/2026 7:18 PM, Luca Weiss wrote:
> GXCLKCTL (Graphics GX Clock Controller) is a block dedicated to managing
> clocks for the GPU subsystem on GX power domain. The GX clock controller
> driver manages only the GX GDSC and the rest of the resources of the
> controller are managed by the firmware.
>
> We can use the existing kaanapali driver for Milos as well since the
> GX_CLKCTL_GX_GDSC supported by the Linux driver requires the same
> configuration.
>
> Signed-off-by: Luca Weiss <[email protected]>
> ---
> drivers/clk/qcom/Makefile | 2 +-
> drivers/clk/qcom/gxclkctl-kaanapali.c | 1 +
> 2 files changed, 2 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile
> index 90ea21c3b7cf..155830140d26 100644
> --- a/drivers/clk/qcom/Makefile
> +++ b/drivers/clk/qcom/Makefile
> @@ -182,7 +182,7 @@ obj-$(CONFIG_SM_GPUCC_8350) += gpucc-sm8350.o
> obj-$(CONFIG_SM_GPUCC_8450) += gpucc-sm8450.o
> obj-$(CONFIG_SM_GPUCC_8550) += gpucc-sm8550.o
> obj-$(CONFIG_SM_GPUCC_8650) += gpucc-sm8650.o
> -obj-$(CONFIG_SM_GPUCC_MILOS) += gpucc-milos.o
> +obj-$(CONFIG_SM_GPUCC_MILOS) += gpucc-milos.o gxclkctl-kaanapali.o
> obj-$(CONFIG_SM_LPASSCC_6115) += lpasscc-sm6115.o
> obj-$(CONFIG_SM_TCSRCC_8550) += tcsrcc-sm8550.o
> obj-$(CONFIG_SM_TCSRCC_8650) += tcsrcc-sm8650.o
> diff --git a/drivers/clk/qcom/gxclkctl-kaanapali.c
> b/drivers/clk/qcom/gxclkctl-kaanapali.c
> index 3ee512f34967..d3899420d6f2 100644
> --- a/drivers/clk/qcom/gxclkctl-kaanapali.c
> +++ b/drivers/clk/qcom/gxclkctl-kaanapali.c
> @@ -54,6 +54,7 @@ static const struct qcom_cc_desc gx_clkctl_kaanapali_desc =
> {
> static const struct of_device_id gx_clkctl_kaanapali_match_table[] = {
> { .compatible = "qcom,glymur-gxclkctl" },
> { .compatible = "qcom,kaanapali-gxclkctl" },
> + { .compatible = "qcom,milos-gxclkctl" },
> { }
> };
> MODULE_DEVICE_TABLE(of, gx_clkctl_kaanapali_match_table);
>
Reviewed-By: Jagadeesh Kona <[email protected]>
Thanks,
Jagadeesh
