Add the definitions for a few fixed regulators found on the Fairphone 3.
Reviewed-by: Konrad Dybcio <[email protected]>
Signed-off-by: Luca Weiss <[email protected]>
---
arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts | 36 +++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
index 55a45b528bd3..557925a66276 100644
--- a/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
+++ b/arch/arm64/boot/dts/qcom/sdm632-fairphone-fp3.dts
@@ -36,6 +36,42 @@ key-volume-up {
};
};
+ vreg_cam_af_2p85: regulator-cam-af-2p85 {
+ compatible = "regulator-fixed";
+ regulator-name = "cam_af_2p85";
+ regulator-min-microvolt = <2850000>;
+ regulator-max-microvolt = <2850000>;
+
+ gpio = <&tlmm 128 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ vreg_cam_io_1p8: regulator-cam-io-1p8 {
+ compatible = "regulator-fixed";
+ regulator-name = "cam_io_1p8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ gpio = <&tlmm 130 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vph_pwr>;
+ };
+
+ vreg_cam2_dig_1p2: regulator-cam2-dig-1p2 {
+ compatible = "regulator-fixed";
+ regulator-name = "cam2_dig_1p2";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+
+ gpio = <&tlmm 46 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+
+ vin-supply = <&vph_pwr>;
+ };
+
/* Dummy regulator until PMI632 has LCDB VSP/VSN support */
lcdb_dummy: regulator-lcdb-dummy {
compatible = "regulator-fixed";
--
2.51.2
