Add simple-framebuffer, necessary power-domains and clocks for ms013g.
Signed-off-by: Raymond Hackley <[email protected]>
---
.../dts/qcom/qcom-msm8226-samsung-ms013g.dts | 31 ++++++++++++++++++-
1 file changed, 30 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
index 08b50dc63923..80fe2916501a 100644
--- a/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
+++ b/arch/arm/boot/dts/qcom/qcom-msm8226-samsung-ms013g.dts
@@ -13,13 +13,37 @@ / {
chassis-type = "handset";
aliases {
+ display0 = &framebuffer0;
mmc0 = &sdhc_1; /* SDC1 eMMC slot */
mmc1 = &sdhc_2; /* SDC2 SD card slot */
serial0 = &blsp1_uart3;
};
chosen {
- stdout-path = "serial0:115200n8";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ stdout-path = "display0";
+
+ framebuffer0: framebuffer@3200000 {
+ compatible = "simple-framebuffer";
+ reg = <0x03200000 0x800000>;
+ memory-region = <&cont_splash_region>;
+
+ width = <720>;
+ height = <1280>;
+ stride = <(720 * 3)>;
+ format = "r8g8b8";
+
+ clocks = <&mmcc MDSS_AHB_CLK>,
+ <&mmcc MDSS_AXI_CLK>,
+ <&mmcc MDSS_BYTE0_CLK>,
+ <&mmcc MDSS_MDP_CLK>,
+ <&mmcc MDSS_PCLK0_CLK>,
+ <&mmcc MDSS_VSYNC_CLK>;
+ power-domains = <&mmcc MDSS_GDSC>;
+ };
};
gpio-hall-sensor {
@@ -93,6 +117,11 @@ reg_vdd_tsp_a: regulator-vdd-tsp-a {
};
reserved-memory {
+ cont_splash_region: cont-splash@3200000 {
+ reg = <0x03200000 0x800000>;
+ no-map;
+ };
+
smem_region: smem@fa00000 {
reg = <0x0fa00000 0x100000>;
no-map;
--
2.47.3
