From: Alexander Martinz <[email protected]> As with all other devices in commit 7747a49db7e5 ("arm64: dts: qcom: sc7280-*: Remove thermal zone polling delays"), apply the same change to this device.
Signed-off-by: Alexander Martinz <[email protected]> Signed-off-by: Luca Weiss <[email protected]> --- arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts | 14 +++++++------- 1 file changed, 7 insertions(+), 7 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts index 8d45e6ac0e445b9e20bb9c1520f804623c505653..2efcfb631c3683456794b0a0cc5686f00efd329c 100644 --- a/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts +++ b/arch/arm64/boot/dts/qcom/qcm6490-shift-otter.dts @@ -131,7 +131,7 @@ rmtfs_mem: rmtfs@f8500000 { thermal-zones { camera-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 2>; trips { @@ -145,7 +145,7 @@ active-config0 { chg-skin-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 0>; trips { @@ -159,7 +159,7 @@ active-config0 { conn-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pm7250b_adc_tm 1>; trips { @@ -173,7 +173,7 @@ active-config0 { quiet-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 1>; trips { @@ -187,7 +187,7 @@ active-config0 { rear-cam-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 4>; trips { @@ -201,7 +201,7 @@ active-config0 { sdm-skin-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 3>; trips { @@ -215,7 +215,7 @@ active-config0 { xo-thermal { polling-delay-passive = <0>; - polling-delay = <0>; + thermal-sensors = <&pmk8350_adc_tm 0>; trips { -- 2.51.0
