From: Alexandre Messier <[email protected]> Add the touchscreen device node for the HTC One (M8).
Signed-off-by: Alexandre Messier <[email protected]> --- arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts | 36 +++++++++++++++++++++++ 1 file changed, 36 insertions(+) diff --git a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts index 36eb42f0f3d9..040a256f9465 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8974pro-htc-m8.dts @@ -65,6 +65,35 @@ vreg_vph_pwr: vreg-vph-pwr { }; }; +&blsp1_i2c2 { + clock-frequency = <384000>; + + status = "okay"; + + touch@20 { + compatible = "syna,rmi4-i2c"; + reg = <0x20>; + + interrupts-extended = <&tlmm 18 IRQ_TYPE_LEVEL_LOW>; + + pinctrl-0 = <&ts_int_pin>; + pinctrl-names = "default"; + + #address-cells = <1>; + #size-cells = <0>; + + rmi4-f01@1 { + reg = <0x1>; + syna,nosleep-mode = <1>; + }; + + rmi4-f11@11 { + reg = <0x11>; + syna,sensor-type = <1>; + }; + }; +}; + &blsp1_i2c3 { clock-frequency = <384000>; @@ -358,6 +387,13 @@ cmd-data-pins { }; }; + ts_int_pin: ts-int-pin-state { + pins = "gpio18"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + }; + wcnss_pin_a: wcnss-pin-active-state { bt-pins { pins = "gpio35", "gpio43", "gpio44"; -- 2.51.0
