From: André Apitzsch <[email protected]> Add alert interrupt for the temperature sensor of Motorola Moto G 4G (2013), although not used by the driver yet.
Signed-off-by: André Apitzsch <[email protected]> --- arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts index 50ae3cfc95bb..cff9415baa46 100644 --- a/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts +++ b/arch/arm/boot/dts/qcom/qcom-msm8926-motorola-peregrine.dts @@ -125,6 +125,10 @@ reg_lcd_neg: outn { sensor@48 { compatible = "ti,tmp108"; reg = <0x48>; + interrupts-extended = <&tlmm 13 IRQ_TYPE_LEVEL_LOW>; + pinctrl-0 = <&temp_alert_default>; + pinctrl-names = "default"; + #thermal-sensor-cells = <0>; }; }; @@ -361,6 +365,14 @@ reg_lcd_default: reg-lcd-default-state { bias-disable; output-high; }; + + temp_alert_default: temp-alert-default-state { + pins = "gpio13"; + function = "gpio"; + drive-strength = <2>; + bias-disable; + output-disable; + }; }; &usb { -- 2.45.2
