From: Karel Balej <[email protected]> Hello,
this patch series generalizes the Imagis touchscreen driver to support other Imagis chips, namely IST3038B and IST3032C, which use a slightly different protocol. It also adds necessary information to the driver so that the IST3032C touchscreen can be used with it. The motivation for this is the samsung,coreprimevelte smartphone with which this series has been tested. However, the support for this device is not yet in-tree, the effort is happening at [1]. Preliminary version of the regulator driver needed to use the touchscreen on this phone can be found here [2]. Note that this is a prerequisite for this patch [3] which implements support for touch keys for Imagis touchscreens that have it. [1] https://lore.kernel.org/all/[email protected]/ [2] https://lore.kernel.org/all/[email protected]/ [3] https://lore.kernel.org/all/[email protected]/ --- v4: - Rebase to v6.7. - v3: https://lore.kernel.org/all/[email protected]/ - Address feedback and add trailers. v3: - Rebase to v6.7-rc3. - v2: https://lore.kernel.org/all/[email protected]/ v2: - Do not rename the driver. - Do not hardcode voltage required by the IST3032C. - Use Markuss' series which generalizes the driver. Link to the original series: https://lore.kernel.org/all/[email protected]/ - Separate bindings into separate patch. - v1: https://lore.kernel.org/all/[email protected]/ Karel Balej (2): dt-bindings: input/touchscreen: imagis: add compatible for IST3032C input/touchscreen: imagis: add support for IST3032C Markuss Broks (3): input/touchscreen: imagis: Correct the maximum touch area value dt-bindings: input/touchscreen: Add compatible for IST3038B input/touchscreen: imagis: Add support for Imagis IST3038B .../input/touchscreen/imagis,ist3038c.yaml | 2 + drivers/input/touchscreen/imagis.c | 70 +++++++++++++++---- 2 files changed, 60 insertions(+), 12 deletions(-) -- 2.43.0
