Document that #pinctrl-cells can be 1 or 2 for pinctrl-single,pins
Fixes: 27c90e5e48d0 ("ARM: dts: am33xx-l4: change #pinctrl-cells from 1 to 2")
Reported-by: Emmanuel Vadot <[email protected]>
Link:
https://lore.kernel.org/linux-gpio/[email protected]/
Cc: Tony Lindgren <[email protected]>
Signed-off-by: Drew Fustini <[email protected]>
---
Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
index f903eb4471f8..bb9999119314 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-single.txt
@@ -8,7 +8,7 @@ Required properties:
- reg : offset and length of the register set for the mux registers
- #pinctrl-cells : number of cells in addition to the index, set to 1
- for pinctrl-single,pins and 2 for pinctrl-single,bits
+ or 2 for pinctrl-single,pins and set to 2 for pinctrl-single,bits
- pinctrl-single,register-width : pinmux register access width in bits
--
2.25.1
