Re: [PATCH 5/9] arm64: dts: ls2088ardb: add PHY nodes for the CS4340 PHYs

[Ioana Ciornei]

On Fri, Oct 30, 2020 at 08:10:38AM +0800, Shawn Guo wrote:
> On Fri, Sep 25, 2020 at 04:24:59PM +0300, Ioana Ciornei wrote:
> > Annotate the EMDIO1 node and describe the 4 10GBASER PHYs found on the
> > LS2088ARDB board. Also, add phy-handles for DPMACs 1-4 to their
> > associated PHY.
> > 
> > Signed-off-by: Ioana Ciornei <ioana.cior...@nxp.com>
> > ---
> >  .../boot/dts/freescale/fsl-ls2088a-rdb.dts    | 41 +++++++++++++++++++
> >  1 file changed, 41 insertions(+)
> > 
> > diff --git a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts 
> > b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
> > index f6b4d75a258b..0d1935fcd201 100644
> > --- a/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
> > +++ b/arch/arm64/boot/dts/freescale/fsl-ls2088a-rdb.dts
> > @@ -22,3 +22,44 @@ chosen {
> >             stdout-path = "serial1:115200n8";
> >     };
> >  };
> > +
> > +&dpmac1 {
> > +   phy-handle = <&mdio1_phy1>;
> > +};
> > +
> > +&dpmac2 {
> > +   phy-handle = <&mdio1_phy2>;
> > +};
> > +
> > +&dpmac3 {
> > +   phy-handle = <&mdio1_phy3>;
> > +};
> > +
> > +&dpmac4 {
> > +   phy-handle = <&mdio1_phy4>;
> > +};
> > +
> > +&emdio1 {
> > +   status = "okay";
> > +
> > +   mdio1_phy1: emdio1_phy@1 {
> > +           compatible = "ethernet-phy-id13e5.1002";
> > +           reg = <0x10>;
> > +           phy-connection-type = "10gbase-r";
> > +   };
> 
> Please have a newline between nodes.
> 

Sure.