On Sat, 26 Sep 2020 12:45:54 +0200
Tobias Jordan <[email protected]> wrote:
> Add missing of_node_put calls for the error paths of the
> for_each_available_child_of_node loop in ltc2983_parse_dt.
>
> Thought about adding an "goto err_of_node_put" instead, but as the error
> paths are quite divergent, I'm not sure if that wouldn't complicate
> things.
>
> Fixes: f110f3188e56 ("iio: temperature: Add support for LTC2983")
> Signed-off-by: Tobias Jordan <[email protected]>
Nuno Sá sent a fix for this yesterday which I've just applied.
Unlucky timing on this one!
Thanks,
Jonathan
> ---
> drivers/iio/temperature/ltc2983.c | 6 ++++++
> 1 file changed, 6 insertions(+)
>
> diff --git a/drivers/iio/temperature/ltc2983.c
> b/drivers/iio/temperature/ltc2983.c
> index 55ff28a0f1c7..438e0ee29025 100644
> --- a/drivers/iio/temperature/ltc2983.c
> +++ b/drivers/iio/temperature/ltc2983.c
> @@ -1285,6 +1285,7 @@ static int ltc2983_parse_dt(struct ltc2983_data *st)
> ret = of_property_read_u32(child, "reg", &sensor.chan);
> if (ret) {
> dev_err(dev, "reg property must given for child
> nodes\n");
> + of_node_put(child);
> return ret;
> }
>
> @@ -1293,9 +1294,11 @@ static int ltc2983_parse_dt(struct ltc2983_data *st)
> sensor.chan > LTC2983_MAX_CHANNELS_NR) {
> dev_err(dev,
> "chan:%d must be from 1 to 20\n", sensor.chan);
> + of_node_put(child);
> return -EINVAL;
> } else if (channel_avail_mask & BIT(sensor.chan)) {
> dev_err(dev, "chan:%d already in use\n", sensor.chan);
> + of_node_put(child);
> return -EINVAL;
> }
>
> @@ -1304,6 +1307,7 @@ static int ltc2983_parse_dt(struct ltc2983_data *st)
> if (ret) {
> dev_err(dev,
> "adi,sensor-type property must given for child
> nodes\n");
> + of_node_put(child);
> return ret;
> }
>
> @@ -1334,12 +1338,14 @@ static int ltc2983_parse_dt(struct ltc2983_data *st)
> st->sensors[chan] = ltc2983_adc_new(child, st, &sensor);
> } else {
> dev_err(dev, "Unknown sensor type %d\n", sensor.type);
> + of_node_put(child);
> return -EINVAL;
> }
>
> if (IS_ERR(st->sensors[chan])) {
> dev_err(dev, "Failed to create sensor %ld",
> PTR_ERR(st->sensors[chan]));
> + of_node_put(child);
> return PTR_ERR(st->sensors[chan]);
> }
> /* set generic sensor parameters */
