On Nov 1, 2007 12:39 PM,  <[EMAIL PROTECTED]> wrote:
>
> The patch titled
>      x86: show cpuinfo only for online CPUs
> has been added to the -mm tree.  Its filename is
>      x86-show-cpuinfo-only-for-online-cpus.patch
>
> *** Remember to use Documentation/SubmitChecklist when testing your code ***
>
> See http://www.zip.com.au/~akpm/linux/patches/stuff/added-to-mm.txt to find
> out what to do about this
>
> ------------------------------------------------------
> Subject: x86: show cpuinfo only for online CPUs
> From: "Andreas Herrmann" <[EMAIL PROTECTED]>
>
> Fix regressions introduced with 92cb7612aee39642d109b8d935ad265e602c0563.
>
> It can happen that cpuinfo is displayed for CPUs that are not online or
> even worse for CPUs not present at all. As an example, following was
> shown for a "second" CPU of a single core K8 variant:
>
>     processor       : 0
>     vendor_id       : unknown
>     cpu family      : 0
>     model           : 0
>     model name      : unknown
>     stepping        : 0
>     cache size      : 0 KB
>     fpu             : yes
>     fpu_exception   : yes
>     cpuid level     : 0
>     wp              : yes
>     flags           :
>     bogomips        : 0.00
>     clflush size    : 0
>     cache_alignment : 0
>     address sizes   : 0 bits physical, 0 bits virtual
>     power management:
>
> Signed-off-by: Andreas Herrmann <[EMAIL PROTECTED]>
> Cc: Glauber de Oliveira Costa <[EMAIL PROTECTED]>
> Cc: Thomas Gleixner <[EMAIL PROTECTED]>
> Cc: Ingo Molnar <[EMAIL PROTECTED]>
> Cc: Mike Travis <[EMAIL PROTECTED]>
> Signed-off-by: Andrew Morton <[EMAIL PROTECTED]>
> ---
>
>  arch/x86/kernel/cpu/proc.c |    8 +++-----
>  arch/x86/kernel/setup_64.c |    8 +++-----
>  2 files changed, 6 insertions(+), 10 deletions(-)
>
...
> diff -puN arch/x86/kernel/setup_64.c~x86-show-cpuinfo-only-for-online-cpus 
> arch/x86/kernel/setup_64.c
> --- a/arch/x86/kernel/setup_64.c~x86-show-cpuinfo-only-for-online-cpus
> +++ a/arch/x86/kernel/setup_64.c
> @@ -1131,8 +1131,6 @@ static int show_cpuinfo(struct seq_file
>
>
>  #ifdef CONFIG_SMP
> -       if (!cpu_online(c->cpu_index))
> -               return 0;
>         cpu = c->cpu_index;
>  #endif

wonder if could change

>       if (!cpu_online(c->cpu_index))
>               return 0;

==>

>       if (c->cpu_index >= NR_CPUS)
>               return 0;

and add another entry for every cpu
online : 1 when it is enabled
or online : 0 when it is disabled by /sys/devices/system/cpuX/online.

YH
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to [EMAIL PROTECTED]
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/

Reply via email to