On Mon 22 Jun 00:57 PDT 2020, Konrad Dybcio wrote:
> Add devicetree files for SDM630 SoC and its pin configuration.
> This commit adds basic nodes like cpu, psci and other required
> configuration for booting up from eMMC to the serial console.
>
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/sdm630-pins.dtsi | 268 ++++++
> arch/arm64/boot/dts/qcom/sdm630.dtsi | 991 ++++++++++++++++++++++
> 2 files changed, 1259 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sdm630-pins.dtsi
> create mode 100644 arch/arm64/boot/dts/qcom/sdm630.dtsi
>
> diff --git a/arch/arm64/boot/dts/qcom/sdm630-pins.dtsi
> b/arch/arm64/boot/dts/qcom/sdm630-pins.dtsi
> new file mode 100644
> index 000000000000..55d80458f447
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm630-pins.dtsi
Please just add these to the tlmm node directly in sdm630.dtsi. We used
to do it like this but are moving away from it.
> @@ -0,0 +1,268 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2020, Konrad Dybcio
> + */
> +
> + &tlmm {
> + blsp1_uart1_default: blsp1_uart1_default {
Please don't use '_' in the node name, i.e. this needs to be:
blsp1_uart1_default: blsp1-uart1-default {
> + config {
You can flatten this by skipping the "config" node and just put the
properties directly in the blsp1_uart1_default node.
[..]
> diff --git a/arch/arm64/boot/dts/qcom/sdm630.dtsi
> b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> new file mode 100644
> index 000000000000..4bf84c44068c
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sdm630.dtsi
> @@ -0,0 +1,991 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2020, Konrad Dybcio
> + */
> +
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/clock/qcom,gcc-sdm660.h>
> +#include <dt-bindings/clock/qcom,rpmcc.h>
> +#include <dt-bindings/gpio/gpio.h>
Please sort these alphabetically.
> +
> +/ {
> + model = "Qualcomm Technologies, Inc. SDM630";
> + compatible = "qcom,sdm630";
These are expected to be overridden by the .dts anyways, so you
can/should omit them from here.
> +
> + interrupt-parent = <&intc>;
> +
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + chosen { };
> +
> + memory {
> + device_type = "memory";
> + /* We expect the bootloader to fill in the reg */
> + reg = <0 0 0 0>;
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + wlan_msa_guard: wlan_msa_guard@85600000 {
As above, no '_' in node names.
> + reg = <0x0 0x85600000 0x0 0x100000>;
> + no-map;
> + };
> +
> + wlan_msa_mem: wlan_msa_mem@85700000 {
> + reg = <0x0 0x85700000 0x0 0x100000>;
> + no-map;
> + };
> +
> + qhee_code: qhee_code@85800000 {
> + reg = <0x0 0x85800000 0x0 0x3700000>;
> + no-map;
> + };
> +
> + smem_region: smem-mem@86000000 {
> + reg = <0 0x86000000 0 0x200000>;
> + no-map;
> + };
> +
> + tz_mem: memory@86200000 {
> + reg = <0x0 0x86200000 0x0 0x3300000>;
> + no-map;
> + };
> +
> + modem_fw_mem: modem_fw_region@8ac00000 {
> + reg = <0x0 0x8ac00000 0x0 0x7e00000>;
> + no-map;
> + };
> +
> + adsp_fw_mem: adsp_fw_region@92a00000 {
> + reg = <0x0 0x92a00000 0x0 0x1e00000>;
> + no-map;
> + };
> +
> + pil_mba_mem: pil_mba_region@94800000 {
> + reg = <0x0 0x94800000 0x0 0x200000>;
> + no-map;
> + };
> +
> + buffer_mem: buffer_region@94a00000 {
> + reg = <0x0 0x94a00000 0x0 0x100000>;
> + no-map;
> + };
> +
> + venus_fw_mem: venus_fw_region@9f800000 {
> + reg = <0x0 0x9f800000 0x0 0x800000>;
> + no-map;
> + };
> +
> + secure_region2: secure_region2@f7c00000 {
> + reg = <0x0 0xf7c00000 0x0 0x5c00000>;
> + no-map;
> + };
> +
> + adsp_mem: adsp_region@f6000000 {
> + reg = <0x0 0xf6000000 0x0 0x800000>;
> + no-map;
> + };
> +
> + qseecom_ta_mem: qseecom_ta_region@fec00000 {
> + reg = <0x0 0xfec00000 0x0 0x1000000>;
> + no-map;
> + };
> +
> + qseecom_mem: qseecom_region@f6800000 {
> + reg = <0x0 0xf6800000 0x0 0x1400000>;
> + no-map;
> + };
> +
> + secure_display_memory: secure_region@f5c00000 {
> + reg = <0x0 0xf5c00000 0x0 0x5c00000>;
> + no-map;
> + };
> +
> + cont_splash_mem: cont_splash_region@9d400000 {
> + reg = <0x0 0x9d400000 0x0 0x23ff000>;
> + no-map;
> + };
> + };
> +
> + clocks {
> + xo_board: xo_board {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <19200000>;
> + clock-output-names = "xo_board";
> + };
> +
> + sleep_clk: sleep_clk {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <32764>;
> + clock-output-names = "sleep_clk";
> + };
> + };
> +
> + cpus {
> + #address-cells = <2>;
> + #size-cells = <0>;
> +
> + CPU0: cpu@100 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x100>;
> + enable-method = "psci";
> + cpu-idle-states = <&PERF_CPU_SLEEP_0
> + &PERF_CPU_SLEEP_1
> + &PERF_CLUSTER_SLEEP_0
> + &PERF_CLUSTER_SLEEP_1
> + &PERF_CLUSTER_SLEEP_2>;
> + capacity-dmips-mhz = <1126>;
> + #cooling-cells = <2>;
> + next-level-cache = <&L2_1>;
> + L2_1: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + };
> + };
> +
> + CPU1: cpu@101 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x101>;
> + enable-method = "psci";
> + cpu-idle-states = <&PERF_CPU_SLEEP_0
> + &PERF_CPU_SLEEP_1
> + &PERF_CLUSTER_SLEEP_0
> + &PERF_CLUSTER_SLEEP_1
> + &PERF_CLUSTER_SLEEP_2>;
> + capacity-dmips-mhz = <1126>;
> + #cooling-cells = <2>;
> + next-level-cache = <&L2_1>;
> + };
> +
> + CPU2: cpu@102 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x102>;
> + enable-method = "psci";
> + cpu-idle-states = <&PERF_CPU_SLEEP_0
> + &PERF_CPU_SLEEP_1
> + &PERF_CLUSTER_SLEEP_0
> + &PERF_CLUSTER_SLEEP_1
> + &PERF_CLUSTER_SLEEP_2>;
> + capacity-dmips-mhz = <1126>;
> + #cooling-cells = <2>;
> + next-level-cache = <&L2_1>;
> + };
> +
> + CPU3: cpu@103 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x103>;
> + enable-method = "psci";
> + cpu-idle-states = <&PERF_CPU_SLEEP_0
> + &PERF_CPU_SLEEP_1
> + &PERF_CLUSTER_SLEEP_0
> + &PERF_CLUSTER_SLEEP_1
> + &PERF_CLUSTER_SLEEP_2>;
> + capacity-dmips-mhz = <1126>;
> + #cooling-cells = <2>;
> + next-level-cache = <&L2_1>;
> + };
> +
> + CPU4: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x0>;
> + enable-method = "psci";
> + cpu-idle-states = <&PWR_CPU_SLEEP_0
> + &PWR_CPU_SLEEP_1
> + &PWR_CLUSTER_SLEEP_0
> + &PWR_CLUSTER_SLEEP_1
> + &PWR_CLUSTER_SLEEP_2>;
> + capacity-dmips-mhz = <1024>;
> + #cooling-cells = <2>;
> + next-level-cache = <&L2_0>;
> + L2_0: l2-cache {
> + compatible = "cache";
> + cache-level = <2>;
> + };
> + };
> +
> + CPU5: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x1>;
> + enable-method = "psci";
> + cpu-idle-states = <&PWR_CPU_SLEEP_0
> + &PWR_CPU_SLEEP_1
> + &PWR_CLUSTER_SLEEP_0
> + &PWR_CLUSTER_SLEEP_1
> + &PWR_CLUSTER_SLEEP_2>;
> + capacity-dmips-mhz = <1024>;
> + #cooling-cells = <2>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU6: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x2>;
> + enable-method = "psci";
> + cpu-idle-states = <&PWR_CPU_SLEEP_0
> + &PWR_CPU_SLEEP_1
> + &PWR_CLUSTER_SLEEP_0
> + &PWR_CLUSTER_SLEEP_1
> + &PWR_CLUSTER_SLEEP_2>;
> + capacity-dmips-mhz = <1024>;
> + #cooling-cells = <2>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + CPU7: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0 0x3>;
> + enable-method = "psci";
> + cpu-idle-states = <&PWR_CPU_SLEEP_0
> + &PWR_CPU_SLEEP_1
> + &PWR_CLUSTER_SLEEP_0
> + &PWR_CLUSTER_SLEEP_1
> + &PWR_CLUSTER_SLEEP_2>;
> + capacity-dmips-mhz = <1024>;
> + #cooling-cells = <2>;
> + next-level-cache = <&L2_0>;
> + };
> +
> + cpu-map {
> + cluster0 {
> + core0 {
> + cpu = <&CPU4>;
> + };
> +
> + core1 {
> + cpu = <&CPU5>;
> + };
> +
> + core2 {
> + cpu = <&CPU6>;
> + };
> +
> + core3 {
> + cpu = <&CPU7>;
> + };
> + };
> +
> + cluster1 {
> + core0 {
> + cpu = <&CPU0>;
> + };
> +
> + core1 {
> + cpu = <&CPU1>;
> + };
> +
> + core2 {
> + cpu = <&CPU2>;
> + };
> +
> + core3 {
> + cpu = <&CPU3>;
> + };
> + };
> + };
> +
> + idle-states {
> + entry-method = "psci";
> +
> + PWR_CPU_SLEEP_0: cpu-sleep-0-0 {
> + compatible = "arm,idle-state";
> + idle-state-name = "pwr-retention";
> + arm,psci-suspend-param = <0x40000002>;
> + entry-latency-us = <338>;
> + exit-latency-us = <423>;
> + min-residency-us = <200>;
> + };
> +
> + PWR_CPU_SLEEP_1: cpu-sleep-0-1 {
> + compatible = "arm,idle-state";
> + idle-state-name = "pwr-power-collapse";
> + arm,psci-suspend-param = <0x40000003>;
> + entry-latency-us = <515>;
> + exit-latency-us = <1821>;
> + min-residency-us = <1000>;
> + local-timer-stop;
> + };
> +
> + PERF_CPU_SLEEP_0: cpu-sleep-1-0 {
> + compatible = "arm,idle-state";
> + idle-state-name = "perf-retention";
> + arm,psci-suspend-param = <0x40000002>;
> + entry-latency-us = <154>;
> + exit-latency-us = <87>;
> + min-residency-us = <200>;
> + };
> +
> + PERF_CPU_SLEEP_1: cpu-sleep-1-1 {
> + compatible = "arm,idle-state";
> + idle-state-name = "perf-power-collapse";
> + arm,psci-suspend-param = <0x40000003>;
> + entry-latency-us = <262>;
> + exit-latency-us = <301>;
> + min-residency-us = <1000>;
> + local-timer-stop;
> + };
> +
> + PWR_CLUSTER_SLEEP_0: cluster-sleep-0-0 {
> + compatible = "arm,idle-state";
> + idle-state-name =
> "pwr-cluster-dynamic-retention";
> + arm,psci-suspend-param = <0x400000F2>;
> + entry-latency-us = <284>;
> + exit-latency-us = <384>;
> + min-residency-us = <9987>;
> + local-timer-stop;
> + };
> +
> + PWR_CLUSTER_SLEEP_1: cluster-sleep-0-1 {
> + compatible = "arm,idle-state";
> + idle-state-name = "pwr-cluster-retention";
> + arm,psci-suspend-param = <0x400000F3>;
> + entry-latency-us = <338>;
> + exit-latency-us = <423>;
> + min-residency-us = <9987>;
> + local-timer-stop;
> + };
> +
> + PWR_CLUSTER_SLEEP_2: cluster-sleep-0-2 {
> + compatible = "arm,idle-state";
> + idle-state-name = "pwr-cluster-retention";
> + arm,psci-suspend-param = <0x400000F4>;
> + entry-latency-us = <515>;
> + exit-latency-us = <1821>;
> + min-residency-us = <9987>;
> + local-timer-stop;
> + };
> +
> + PERF_CLUSTER_SLEEP_0: cluster-sleep-1-0 {
> + compatible = "arm,idle-state";
> + idle-state-name =
> "perf-cluster-dynamic-retention";
> + arm,psci-suspend-param = <0x400000F2>;
> + entry-latency-us = <272>;
> + exit-latency-us = <329>;
> + min-residency-us = <9987>;
> + local-timer-stop;
> + };
> +
> + PERF_CLUSTER_SLEEP_1: cluster-sleep-1-1 {
> + compatible = "arm,idle-state";
> + idle-state-name = "perf-cluster-retention";
> + arm,psci-suspend-param = <0x400000F3>;
> + entry-latency-us = <332>;
> + exit-latency-us = <368>;
> + min-residency-us = <9987>;
> + local-timer-stop;
> + };
> +
> + PERF_CLUSTER_SLEEP_2: cluster-sleep-1-2 {
> + compatible = "arm,idle-state";
> + idle-state-name = "perf-cluster-retention";
> + arm,psci-suspend-param = <0x400000F4>;
> + entry-latency-us = <545>;
> + exit-latency-us = <1609>;
> + min-residency-us = <9987>;
> + local-timer-stop;
> + };
> + };
> + };
> +
> + firmware {
> + scm {
> + compatible = "qcom,scm-msm8998", "qcom,scm";
> + };
> + };
> +
> + tcsr_mutex: hwlock {
> + compatible = "qcom,tcsr-mutex";
> + syscon = <&tcsr_mutex_block 0 0x1000>;
> + #hwlock-cells = <1>;
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
> +
> + rpm-glink {
> + compatible = "qcom,glink-rpm";
> +
> + interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
> + qcom,rpm-msg-ram = <&rpm_msg_ram>;
> + mboxes = <&apcs_glb 0>;
> +
> + rpm_requests: rpm-requests {
> + compatible = "qcom,rpm-sdm660";
> + qcom,glink-channels = "rpm_requests";
> +
> + rpmcc: clock-controller {
> + compatible = "qcom,rpmcc-sdm660", "qcom,rpmcc";
> + #clock-cells = <1>;
> + };
> + };
> + };
> +
> + smem: smem {
> + compatible = "qcom,smem";
> + memory-region = <&smem_region>;
> + hwlocks = <&tcsr_mutex 3>;
> + };
> +
> + tcsr_mutex_block: syscon@1f40000 {
> + compatible = "syscon";
> + reg = <0 0x1f40000 0 0x20000>;
> + };
> +
> + pmu {
> + compatible = "arm,armv8-pmuv3";
> + interrupts = <GIC_PPI 6 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupts = <GIC_PPI 1 0xf08>,
> + <GIC_PPI 2 0xf08>,
> + <GIC_PPI 3 0xf08>,
> + <GIC_PPI 0 0xf08>;
> + };
> +
> + soc {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges = <0 0 0 0xffffffff>;
> + compatible = "simple-bus";
> +
> + gcc: clock-controller@100000 {
> + compatible = "qcom,gcc-sdm630";
> + #clock-cells = <1>;
> + #reset-cells = <1>;
> + #power-domain-cells = <1>;
> + reg = <0x100000 0x94000>;
Please pad the address to 8 digits to make it faster to check the sort
order of these.
And then please sort your nodes based on address (and then name for
nodes without reg).
> +
> + clock-names = "xo", "sleep_clk";
> + clocks = <&xo_board>,
> + <&sleep_clk>;
> + };
> +
> + rng: rng@793000 {
> + compatible = "qcom,prng-ee";
> + reg = <0x793000 0x1000>;
> + clocks = <&gcc GCC_PRNG_AHB_CLK>;
> + clock-names = "core";
> + };
> +
> + intc: interrupt-controller@17a00000 {
> + compatible = "arm,gic-v3";
> + reg = <0x17a00000 0x10000>, /* GICD */
> + <0x17b00000 0x100000>; /* GICR * 8 */
> + #interrupt-cells = <3>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + interrupt-controller;
> + #redistributor-regions = <1>;
> + redistributor-stride = <0x0 0x20000>;
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
> + };
> +
> + restart@10ac000 {
> + compatible = "qcom,pshold";
> + reg = <0x10ac000 0x4>;
> + };
> +
> + tcsr_mutex_regs: syscon@1f40000 {
> + compatible = "syscon";
> + reg = <0x01f40000 0x20000>;
> + };
> +
> + rpm_msg_ram: memory@778000 {
> + compatible = "qcom,rpm-msg-ram";
> + reg = <0x778000 0x7000>;
> + };
> +
> + qfprom: qfprom@780000 {
> + compatible = "qcom,qfprom";
> + reg = <0x780000 0x621c>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> + };
> +
> + apcs_glb: mailbox@17911000 {
> + compatible = "qcom,msm8998-apcs-hmss-global";
Please make sure there's a proper compatible for this.
> + reg = <0x17911000 0x1000>;
> +
> + #mbox-cells = <1>;
> + };
> +
> + tlmm: pinctrl@3000000 {
> + compatible = "qcom,sdm630-pinctrl";
> + reg = <0x3000000 0xc00000>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <0x2>;
> + interrupt-controller;
> + #interrupt-cells = <0x2>;
> + };
> +
> + spmi_bus: spmi@800f000 {
> + compatible = "qcom,spmi-pmic-arb";
> + reg = <0x0800f000 0x1000>,
> + <0x08400000 0x1000000>,
> + <0x09400000 0x1000000>,
> + <0x0a400000 0x220000>,
> + <0x0800a000 0x3000>;
> + reg-names = "core", "chnls", "obsrvr", "intr", "cnfg";
> + interrupt-names = "periph_irq";
> + interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>;
> + qcom,ee = <0>;
> + qcom,channel = <0>;
> + #address-cells = <2>;
> + #size-cells = <0>;
> + interrupt-controller;
> + #interrupt-cells = <4>;
> + cell-index = <0>;
> + };
> +
> + timer@17920000 {
> + #address-cells = <1>;
> + #size-cells = <1>;
> + ranges;
> + compatible = "arm,armv7-timer-mem";
> + reg = <0x17920000 0x1000>;
> + clock-frequency = <19200000>;
> +
> + frame@17921000 {
> + frame-number = <0>;
> + interrupts = <0 8 0x4>,
> + <0 7 0x4>;
> + reg = <0x17921000 0x1000>,
> + <0x17922000 0x1000>;
> + };
> +
> + frame@17923000 {
> + frame-number = <1>;
> + interrupts = <0 9 0x4>;
> + reg = <0x17923000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17924000 {
> + frame-number = <2>;
> + interrupts = <0 10 0x4>;
> + reg = <0x17924000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17925000 {
> + frame-number = <3>;
> + interrupts = <0 11 0x4>;
> + reg = <0x17925000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17926000 {
> + frame-number = <4>;
> + interrupts = <0 12 0x4>;
> + reg = <0x17926000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17927000 {
> + frame-number = <5>;
> + interrupts = <0 13 0x4>;
> + reg = <0x17927000 0x1000>;
> + status = "disabled";
> + };
> +
> + frame@17928000 {
> + frame-number = <6>;
> + interrupts = <0 14 0x4>;
> + reg = <0x17928000 0x1000>;
> + status = "disabled";
> + };
> + };
> +
> + sdhc_1: sdhci@c0c4000 {
> + compatible = "qcom,sdm630-sdhci", "qcom,sdhci-msm-v5";
> + reg = <0xc0c4000 0x1000>,
> + <0xc0c5000 0x1000>;
> + reg-names = "hc", "cqhci";
> +
> + interrupts = <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
> + interrupt-names = "hc_irq", "pwr_irq";
> +
> + clocks = <&gcc GCC_SDCC1_APPS_CLK>,
> + <&gcc GCC_SDCC1_AHB_CLK>,
> + <&xo_board>;
> + clock-names = "core", "iface", "xo";
> +
> + pinctrl-names = "default", "sleep";
> + pinctrl-0 = <&sdc1_clk_on &sdc1_cmd_on &sdc1_data_on
> &sdc1_rclk_on>;
> + pinctrl-1 = <&sdc1_clk_off &sdc1_cmd_off &sdc1_data_off
> &sdc1_rclk_off>;
> +
> + bus-width = <8>;
> + non-removable;
> +
> + mmc-ddr-1_8v;
> + mmc-hs200-1_8v;
> + mmc-hs400-1_8v;
These are board properties, consider pushing them out to the individual
.dts files.
> +
> + status = "disabled";
> + };
> +
Regards,
Bjorn
