Hook the reset line into an emmc-pwrseq for it to get initialized nicely.
Signed-off-by: Heiko Stuebner <[email protected]>
---
arch/arm64/boot/dts/rockchip/px30-evb.dts | 14 ++++++++++++++
1 file changed, 14 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts
b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index d78fb172a66f..6d50f6abcb48 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -61,6 +61,13 @@
power-supply = <&vcc3v3_lcd>;
};
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ pinctrl-0 = <&emmc_reset>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio1 RK_PB3 GPIO_ACTIVE_HIGH>;
+ };
+
sdio_pwrseq: sdio-pwrseq {
compatible = "mmc-pwrseq-simple";
pinctrl-names = "default";
@@ -110,6 +117,7 @@
cap-mmc-highspeed;
mmc-hs200-1_8v;
non-removable;
+ mmc-pwrseq = <&emmc_pwrseq>;
vmmc-supply = <&vcc_3v0>;
vqmmc-supply = <&vccio_flash>;
status = "okay";
@@ -364,6 +372,12 @@
};
};
+ emmc {
+ emmc_reset: emmc-reset {
+ rockchip,pins = <1 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
pmic {
pmic_int: pmic_int {
rockchip,pins =
--
2.20.1
