Hello,
syzbot found the following crash on:
HEAD commit: bed3c0d8 Merge tag 'for-5.2-rc5-tag' of git://git.kernel.o..
git tree: upstream
console output: https://syzkaller.appspot.com/x/log.txt?x=14a165c9a00000
kernel config: https://syzkaller.appspot.com/x/.config?x=28ec3437a5394ee0
dashboard link: https://syzkaller.appspot.com/bug?extid=fc1da0f1a577d15b64fc
compiler: clang version 9.0.0 (/home/glider/llvm/clang
80fee25776c2fb61e74c1ecb1a523375c2500b69)
Unfortunately, I don't have any reproducer for this crash yet.
IMPORTANT: if you fix the bug, please add the following tag to the commit:
Reported-by: [email protected]
======================================================
WARNING: possible circular locking dependency detected
5.2.0-rc5+ #3 Not tainted
------------------------------------------------------
syz-executor.1/11011 is trying to acquire lock:
0000000046a921a5 (console_owner){-.-.}, at:
console_trylock_spinning+0x12f/0x390 kernel/printk/printk.c:1718
but task is already holding lock:
00000000b4370e8d (&(&port->lock)->rlock){-.-.}, at: pty_write+0xbd/0x190
drivers/tty/pty.c:120
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #2 (&(&port->lock)->rlock){-.-.}:
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xa1/0xc0 kernel/locking/spinlock.c:159
tty_port_tty_get drivers/tty/tty_port.c:287 [inline]
tty_port_default_wakeup+0x20/0xa0 drivers/tty/tty_port.c:47
tty_port_tty_wakeup+0x5a/0x70 drivers/tty/tty_port.c:387
uart_write_wakeup+0x48/0x60 drivers/tty/serial/serial_core.c:103
serial8250_tx_chars+0x623/0x830
drivers/tty/serial/8250/8250_port.c:1806
serial8250_handle_irq+0x255/0x390
drivers/tty/serial/8250/8250_port.c:1879
serial8250_default_handle_irq+0xc5/0x1d0
drivers/tty/serial/8250/8250_port.c:1895
serial8250_interrupt+0xad/0x190
drivers/tty/serial/8250/8250_core.c:125
__handle_irq_event_percpu+0x113/0x560 kernel/irq/handle.c:149
handle_irq_event_percpu kernel/irq/handle.c:189 [inline]
handle_irq_event+0x10a/0x2f0 kernel/irq/handle.c:206
handle_edge_irq+0x29f/0xca0 kernel/irq/chip.c:822
generic_handle_irq_desc include/linux/irqdesc.h:156 [inline]
handle_irq+0x3e/0x50 arch/x86/kernel/irq_64.c:34
do_IRQ+0xc4/0x1a0 arch/x86/kernel/irq.c:247
ret_from_intr+0x0/0x1e
arch_local_irq_restore arch/x86/include/asm/paravirt.h:767 [inline]
__raw_spin_unlock_irqrestore include/linux/spinlock_api_smp.h:160
[inline]
_raw_spin_unlock_irqrestore+0xad/0xe0 kernel/locking/spinlock.c:191
spin_unlock_irqrestore include/linux/spinlock.h:393 [inline]
uart_write+0x841/0xa50 drivers/tty/serial/serial_core.c:612
process_output_block drivers/tty/n_tty.c:595 [inline]
n_tty_write+0xd6c/0x12d0 drivers/tty/n_tty.c:2333
do_tty_write drivers/tty/tty_io.c:961 [inline]
tty_write+0x581/0x860 drivers/tty/tty_io.c:1045
redirected_tty_write+0x9e/0xb0 drivers/tty/tty_io.c:1066
__vfs_write+0xf9/0x7d0 fs/read_write.c:494
vfs_write+0x227/0x510 fs/read_write.c:558
ksys_write+0x16b/0x2a0 fs/read_write.c:611
__do_sys_write fs/read_write.c:623 [inline]
__se_sys_write fs/read_write.c:620 [inline]
__x64_sys_write+0x7b/0x90 fs/read_write.c:620
do_syscall_64+0xfe/0x140 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe
-> #1 (&port_lock_key){-.-.}:
__raw_spin_lock_irqsave include/linux/spinlock_api_smp.h:110 [inline]
_raw_spin_lock_irqsave+0xa1/0xc0 kernel/locking/spinlock.c:159
serial8250_console_write+0x1d1/0xba0
drivers/tty/serial/8250/8250_port.c:3245
univ8250_console_write+0x50/0x70
drivers/tty/serial/8250/8250_core.c:586
call_console_drivers kernel/printk/printk.c:1779 [inline]
console_unlock+0x95f/0xf20 kernel/printk/printk.c:2463
vprintk_emit+0x239/0x3a0 kernel/printk/printk.c:1986
vprintk_default+0x28/0x30 kernel/printk/printk.c:2013
vprintk_func+0x158/0x170 kernel/printk/printk_safe.c:386
printk+0xc4/0x11d kernel/printk/printk.c:2046
register_console+0xa81/0xe30 kernel/printk/printk.c:2788
univ8250_console_init+0x4b/0x4d
drivers/tty/serial/8250/8250_core.c:681
console_init+0x56/0x9c kernel/printk/printk.c:2874
start_kernel+0x49e/0x860 init/main.c:688
x86_64_start_reservations+0x18/0x2e arch/x86/kernel/head64.c:470
x86_64_start_kernel+0x7a/0x7d arch/x86/kernel/head64.c:451
secondary_startup_64+0xa4/0xb0 arch/x86/kernel/head_64.S:243
-> #0 (console_owner){-.-.}:
lock_acquire+0x158/0x250 kernel/locking/lockdep.c:4303
console_trylock_spinning+0x14f/0x390 kernel/printk/printk.c:1735
vprintk_emit+0x21c/0x3a0 kernel/printk/printk.c:1985
vprintk_default+0x28/0x30 kernel/printk/printk.c:2013
vprintk_func+0x158/0x170 kernel/printk/printk_safe.c:386
printk+0xc4/0x11d kernel/printk/printk.c:2046
fail_dump lib/fault-inject.c:45 [inline]
should_fail+0x5c5/0x860 lib/fault-inject.c:144
__should_failslab+0x11a/0x160 mm/failslab.c:32
should_failslab+0x9/0x20 mm/slab_common.c:1610
slab_pre_alloc_hook mm/slab.h:420 [inline]
slab_alloc mm/slab.c:3312 [inline]
__do_kmalloc mm/slab.c:3658 [inline]
__kmalloc+0x7a/0x310 mm/slab.c:3669
kmalloc include/linux/slab.h:552 [inline]
tty_buffer_alloc drivers/tty/tty_buffer.c:175 [inline]
__tty_buffer_request_room+0x1ef/0x560 drivers/tty/tty_buffer.c:273
tty_insert_flip_string_fixed_flag+0xa4/0x2b0
drivers/tty/tty_buffer.c:318
tty_insert_flip_string include/linux/tty_flip.h:37 [inline]
pty_write+0xe2/0x190 drivers/tty/pty.c:122
tty_put_char+0x115/0x180 drivers/tty/tty_io.c:3031
__process_echoes+0x47f/0x920 drivers/tty/n_tty.c:728
flush_echoes drivers/tty/n_tty.c:829 [inline]
__receive_buf drivers/tty/n_tty.c:1648 [inline]
n_tty_receive_buf_common+0x297f/0x3080 drivers/tty/n_tty.c:1742
n_tty_receive_buf+0x30/0x40 drivers/tty/n_tty.c:1771
tiocsti drivers/tty/tty_io.c:2195 [inline]
tty_ioctl+0xd63/0x15d0 drivers/tty/tty_io.c:2571
do_vfs_ioctl+0x7d4/0x1890 fs/ioctl.c:46
ksys_ioctl fs/ioctl.c:713 [inline]
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0xe3/0x120 fs/ioctl.c:718
do_syscall_64+0xfe/0x140 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe
other info that might help us debug this:
Chain exists of:
console_owner --> &port_lock_key --> &(&port->lock)->rlock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&(&port->lock)->rlock);
lock(&port_lock_key);
lock(&(&port->lock)->rlock);
lock(console_owner);
*** DEADLOCK ***
4 locks held by syz-executor.1/11011:
#0: 000000001e367af1 (&tty->ldisc_sem){++++}, at:
tty_ldisc_ref_wait+0x25/0x70 drivers/tty/tty_ldisc.c:272
#1: 00000000a83060be (&o_tty->termios_rwsem/1){++++}, at:
n_tty_receive_buf_common+0x8b/0x3080 drivers/tty/n_tty.c:1705
#2: 0000000055e44ce8 (&ldata->output_lock){+.+.}, at: flush_echoes
drivers/tty/n_tty.c:827 [inline]
#2: 0000000055e44ce8 (&ldata->output_lock){+.+.}, at: __receive_buf
drivers/tty/n_tty.c:1648 [inline]
#2: 0000000055e44ce8 (&ldata->output_lock){+.+.}, at:
n_tty_receive_buf_common+0x2940/0x3080 drivers/tty/n_tty.c:1742
#3: 00000000b4370e8d (&(&port->lock)->rlock){-.-.}, at:
pty_write+0xbd/0x190 drivers/tty/pty.c:120
stack backtrace:
CPU: 1 PID: 11011 Comm: syz-executor.1 Not tainted 5.2.0-rc5+ #3
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS
Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x1d8/0x2f8 lib/dump_stack.c:113
print_circular_bug+0xd34/0xf20 kernel/locking/lockdep.c:1564
check_prev_add kernel/locking/lockdep.c:2310 [inline]
check_prevs_add kernel/locking/lockdep.c:2418 [inline]
validate_chain+0x59d0/0x84f0 kernel/locking/lockdep.c:2800
__lock_acquire+0xcf7/0x1a40 kernel/locking/lockdep.c:3793
lock_acquire+0x158/0x250 kernel/locking/lockdep.c:4303
console_trylock_spinning+0x14f/0x390 kernel/printk/printk.c:1735
vprintk_emit+0x21c/0x3a0 kernel/printk/printk.c:1985
vprintk_default+0x28/0x30 kernel/printk/printk.c:2013
vprintk_func+0x158/0x170 kernel/printk/printk_safe.c:386
printk+0xc4/0x11d kernel/printk/printk.c:2046
fail_dump lib/fault-inject.c:45 [inline]
should_fail+0x5c5/0x860 lib/fault-inject.c:144
__should_failslab+0x11a/0x160 mm/failslab.c:32
should_failslab+0x9/0x20 mm/slab_common.c:1610
slab_pre_alloc_hook mm/slab.h:420 [inline]
slab_alloc mm/slab.c:3312 [inline]
__do_kmalloc mm/slab.c:3658 [inline]
__kmalloc+0x7a/0x310 mm/slab.c:3669
kmalloc include/linux/slab.h:552 [inline]
tty_buffer_alloc drivers/tty/tty_buffer.c:175 [inline]
__tty_buffer_request_room+0x1ef/0x560 drivers/tty/tty_buffer.c:273
tty_insert_flip_string_fixed_flag+0xa4/0x2b0 drivers/tty/tty_buffer.c:318
tty_insert_flip_string include/linux/tty_flip.h:37 [inline]
pty_write+0xe2/0x190 drivers/tty/pty.c:122
tty_put_char+0x115/0x180 drivers/tty/tty_io.c:3031
__process_echoes+0x47f/0x920 drivers/tty/n_tty.c:728
flush_echoes drivers/tty/n_tty.c:829 [inline]
__receive_buf drivers/tty/n_tty.c:1648 [inline]
n_tty_receive_buf_common+0x297f/0x3080 drivers/tty/n_tty.c:1742
n_tty_receive_buf+0x30/0x40 drivers/tty/n_tty.c:1771
tiocsti drivers/tty/tty_io.c:2195 [inline]
tty_ioctl+0xd63/0x15d0 drivers/tty/tty_io.c:2571
do_vfs_ioctl+0x7d4/0x1890 fs/ioctl.c:46
ksys_ioctl fs/ioctl.c:713 [inline]
__do_sys_ioctl fs/ioctl.c:720 [inline]
__se_sys_ioctl fs/ioctl.c:718 [inline]
__x64_sys_ioctl+0xe3/0x120 fs/ioctl.c:718
do_syscall_64+0xfe/0x140 arch/x86/entry/common.c:301
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x4592c9
Code: fd b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7
48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff
ff 0f 83 cb b7 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f1a2359dc78 EFLAGS: 00000246 ORIG_RAX: 0000000000000010
RAX: ffffffffffffffda RBX: 00007f1a2359dc90 RCX: 00000000004592c9
RDX: 0000000020000000 RSI: 0000000000005412 RDI: 0000000000000004
RBP: 000000000075bf20 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f1a2359e6d4
R13: 00000000004c3827 R14: 00000000004d71d8 R15: 0000000000000005
---
This bug is generated by a bot. It may contain errors.
See https://goo.gl/tpsmEJ for more information about syzbot.
syzbot engineers can be reached at [email protected].
syzbot will keep track of this bug report. See:
https://goo.gl/tpsmEJ#status for how to communicate with syzbot.
