Hello Jernej,
On Tue, Jun 04, 2019 at 05:35:48PM +0200, Jernej Škrabec wrote:
> Hi!
>
> Dne torek, 04. junij 2019 ob 17:31:20 CEST je 'Ondřej Jirman' via linux-sunxi
> napisal(a):
> > Hi Jernej,
> >
> > On Tue, Jun 04, 2019 at 05:03:55PM +0200, Jernej Škrabec wrote:
> > > Dne torek, 04. junij 2019 ob 17:00:54 CEST je megous via linux-sunxi
> > >
> > > napisal(a):
> > > > From: Ondrej Jirman <[email protected]>
> > > >
> > > > The current code defines W1 clock gate to be at 0x1cc, overlaying it
> > > > with the IR gate.
> > > >
> > > > Clock gate for r-apb1-w1 is at 0x1ec. This fixes issues with IR receiver
> > > > causing interrupt floods on H6 (because interrupt flags can't be
> > > > cleared,
> > > > due to IR module's bus being disabled).
> > > >
> > > > Signed-off-by: Ondrej Jirman <[email protected]>
> > >
> > > You should add Fixes tag and CC stable with this.
> >
> > Not necessary, since H6 IR is not yet supported on mainline.
>
> Well, CCing stable is probably really not necessary, but you are fixing bug
> in
> existing driver (clk), fixes tag still apply.
Right, resent v2.
thank you and regards,
o.
> Best regards,
> Jernej
>
> >
> > regards,
> > o.
> >
> > > Best regards,
> > > Jernej
> > >
> > >
> > >
> > > _______________________________________________
> > > linux-arm-kernel mailing list
> > > [email protected]
> > > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
>
>
>
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> [email protected]
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
