From: Christian Hewitt <[email protected]> This enables Bluetooth support for the following models:
AP6335 in the WeTek Hub rev1 - BCM4335C0.hcd AP6255 in the WeTek Hub rev2 - BCM4345C0.hcd AP6330 in the WeTek Play 2 - BCM4330B1.hcd Signed-off-by: Christian Hewitt <[email protected]> Signed-off-by: Neil Armstrong <[email protected]> --- arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+) diff --git a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi index 45e306da2154..9ef6858779c1 100644 --- a/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi +++ b/arch/arm64/boot/dts/amlogic/meson-gxbb-wetek.dtsi @@ -249,6 +249,19 @@ vqmmc-supply = <&vddio_boot>; }; +/* This is connected to the Bluetooth module: */ +&uart_A { + status = "okay"; + pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>; + pinctrl-names = "default"; + uart-has-rtscts; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpio GPIOX_20 GPIO_ACTIVE_HIGH>; + }; +}; + /* This UART is brought out to the DB9 connector */ &uart_AO { status = "okay"; -- 2.21.0
