On Thu, May 16, 2019 at 05:02:16PM +0800, Bibby Hsieh wrote: > Client hardware would send event to GCE hardware, > mediatek,gce-event-names and mediatek,gce-events
We removed mediatek,gce-event-names? > can be used to present the event. > > Signed-off-by: Bibby Hsieh <[email protected]> > --- > Documentation/devicetree/bindings/mailbox/mtk-gce.txt | 6 ++++-- > 1 file changed, 4 insertions(+), 2 deletions(-) > > diff --git a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > index dceab63ccd06..265bb58da7bd 100644 > --- a/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > +++ b/Documentation/devicetree/bindings/mailbox/mtk-gce.txt > @@ -35,6 +35,8 @@ Required properties for a client device: > Optional properties for a client device: > - mediatek,gce-client-reg: u32, specify the sub-system id which is > corresponding > to the register address. > +- mediatek,gce-events: u32, the event number defined in > + 'dt-bindings/gce/mt8173-gce.h' or 'dt-binding/gce/mt8183-gce.h'. This and the example don't match. Is it an u32 or an array of u32? If the latter, how many elements? > > Some vaules of properties are defined in 'dt-bindings/gce/mt8173-gce.h' > or 'dt-binding/gce/mt8183-gce.h'. Such as sub-system ids, thread priority, > event ids. > @@ -57,8 +59,8 @@ Example for a client device: > compatible = "mediatek,mt8173-mmsys"; > mboxes = <&gce 0 CMDQ_THR_PRIO_LOWEST 1>, > <&gce 1 CMDQ_THR_PRIO_LOWEST 1>; > - mutex-event-eof = <CMDQ_EVENT_MUTEX0_STREAM_EOF > - CMDQ_EVENT_MUTEX1_STREAM_EOF>; > + mediatek,gce-events = <CMDQ_EVENT_MDP_RDMA0_SOF>, > + <CMDQ_EVENT_MDP_RSZ0_SOF>; > mediatek,gce-client-reg = <&gce SUBSYS_1400XXXX 0x3000 0x1000>, > <&gce SUBSYS_1401XXXX 0x2000 0x100>; > ... > -- > 2.18.0 >
