Formatting of Kconfig files doesn't look so pretty, so let the Great White Handkerchief come around and clean it up.
Signed-off-by: Enrico Weigelt, metux IT consult <[email protected]> --- drivers/i2c/Kconfig | 2 +- drivers/i2c/busses/Kconfig | 36 ++++++++++++++++++------------------ drivers/i2c/muxes/Kconfig | 18 +++++++++--------- 3 files changed, 28 insertions(+), 28 deletions(-) diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig index c6b7fc7..797c2c9 100644 --- a/drivers/i2c/Kconfig +++ b/drivers/i2c/Kconfig @@ -55,7 +55,7 @@ config I2C_CHARDEV programs use the I2C bus. Information on how to do this is contained in the file <file:Documentation/i2c/dev-interface>. - This support is also available as a module. If so, the module + This support is also available as a module. If so, the module will be called i2c-dev. config I2C_MUX diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig index f2c6819..4d0a668 100644 --- a/drivers/i2c/busses/Kconfig +++ b/drivers/i2c/busses/Kconfig @@ -277,7 +277,7 @@ config I2C_VIA select I2C_ALGOBIT help If you say yes to this option, support will be included for the VIA - 82C586B I2C interface + 82C586B I2C interface This driver can also be built as a module. If so, the module will be called i2c-via. @@ -647,11 +647,11 @@ config I2C_IMX_LPI2C tristate "IMX Low Power I2C interface" depends on ARCH_MXC || COMPILE_TEST help - Say Y here if you want to use the Low Power IIC bus controller - on the Freescale i.MX processors. + Say Y here if you want to use the Low Power IIC bus controller + on the Freescale i.MX processors. - This driver can also be built as a module. If so, the module - will be called i2c-imx-lpi2c. + This driver can also be built as a module. If so, the module + will be called i2c-imx-lpi2c. config I2C_IOP3XX tristate "Intel IOPx3xx and IXP4xx on-chip I2C interface" @@ -667,10 +667,10 @@ config I2C_JZ4780 tristate "JZ4780 I2C controller interface support" depends on MACH_JZ4780 || COMPILE_TEST help - If you say yes to this option, support will be included for the - Ingenic JZ4780 I2C controller. + If you say yes to this option, support will be included for the + Ingenic JZ4780 I2C controller. - If you don't know what to do here, say N. + If you don't know what to do here, say N. config I2C_KEMPLD tristate "Kontron COM I2C Controller" @@ -1145,14 +1145,14 @@ config I2C_DIOLAN_U2C will be called i2c-diolan-u2c. config I2C_DLN2 - tristate "Diolan DLN-2 USB I2C adapter" - depends on MFD_DLN2 - help - If you say yes to this option, support will be included for Diolan - DLN2, a USB to I2C interface. + tristate "Diolan DLN-2 USB I2C adapter" + depends on MFD_DLN2 + help + If you say yes to this option, support will be included for Diolan + DLN2, a USB to I2C interface. - This driver can also be built as a module. If so, the module - will be called i2c-dln2. + This driver can also be built as a module. If so, the module + will be called i2c-dln2. config I2C_PARPORT tristate "Parallel port adapter" @@ -1246,9 +1246,9 @@ config I2C_VIPERBOARD help Say yes here to access the I2C part of the Nano River Technologies Viperboard as I2C master. - See viperboard API specification and Nano - River Tech's viperboard.h for detailed meaning - of the module parameters. + See viperboard API specification and Nano + River Tech's viperboard.h for detailed meaning + of the module parameters. comment "Other I2C/SMBus bus drivers" diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig index 52a4a92..adff0cc 100644 --- a/drivers/i2c/muxes/Kconfig +++ b/drivers/i2c/muxes/Kconfig @@ -108,14 +108,14 @@ config I2C_DEMUX_PINCTRL want to change the I2C master at run-time depending on features. config I2C_MUX_MLXCPLD - tristate "Mellanox CPLD based I2C multiplexer" - help - If you say yes to this option, support will be included for a - CPLD based I2C multiplexer. This driver provides access to - I2C busses connected through a MUX, which is controlled - by a CPLD register. - - This driver can also be built as a module. If so, the module - will be called i2c-mux-mlxcpld. + tristate "Mellanox CPLD based I2C multiplexer" + help + If you say yes to this option, support will be included for a + CPLD based I2C multiplexer. This driver provides access to + I2C busses connected through a MUX, which is controlled + by a CPLD register. + + This driver can also be built as a module. If so, the module + will be called i2c-mux-mlxcpld. endmenu -- 1.9.1
