Add interrupt controller properties now that ssbi-gpio is a proper hierarchical IRQ chip. The interrupts property is no longer needed so remove it.
Note that the IRQs started at 24 instead of 192 like all of the other PMICs. This is the same IRQs as the MPP for this board. qcom-pm8xxx.c doesn't set the shared IRQs so this is highly likely to be a copy and paste error. Signed-off-by: Brian Masney <[email protected]> --- Changes since v1: - None arch/arm/boot/dts/qcom-mdm9615.dtsi | 9 ++------- 1 file changed, 2 insertions(+), 7 deletions(-) diff --git a/arch/arm/boot/dts/qcom-mdm9615.dtsi b/arch/arm/boot/dts/qcom-mdm9615.dtsi index e49f67ad5dbc..02afc6a42005 100644 --- a/arch/arm/boot/dts/qcom-mdm9615.dtsi +++ b/arch/arm/boot/dts/qcom-mdm9615.dtsi @@ -323,13 +323,8 @@ pmicgpio: gpio@150 { compatible = "qcom,pm8018-gpio", "qcom,ssbi-gpio"; - interrupt-parent = <&pmicintc>; - interrupts = <24 IRQ_TYPE_NONE>, - <25 IRQ_TYPE_NONE>, - <26 IRQ_TYPE_NONE>, - <27 IRQ_TYPE_NONE>, - <28 IRQ_TYPE_NONE>, - <29 IRQ_TYPE_NONE>; + interrupt-controller; + #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; }; -- 2.17.2
