This commit simply renames gpio_set_drive_single_ended() to
gpio_set_config(), as the function is not specific to setting the GPIO
drive type, and will be used for other purposes in followup commits.

In addition, it moves the function above gpiod_direction_input(), as
it will be used from gpiod_direction_input().

Signed-off-by: Thomas Petazzoni <[email protected]>
---
 drivers/gpio/gpiolib.c | 28 ++++++++++++++--------------
 1 file changed, 14 insertions(+), 14 deletions(-)

diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 361a09c8138a..cf8a4402fef1 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -2555,6 +2555,14 @@ EXPORT_SYMBOL_GPL(gpiochip_free_own_desc);
  * rely on gpio_request() having been called beforehand.
  */
 
+static int gpio_set_config(struct gpio_chip *gc, unsigned offset,
+                          enum pin_config_param mode)
+{
+       unsigned long config = { PIN_CONF_PACKED(mode, 0) };
+
+       return gc->set_config ? gc->set_config(gc, offset, config) : -ENOTSUPP;
+}
+
 /**
  * gpiod_direction_input - set the GPIO direction to input
  * @desc:      GPIO to set to input
@@ -2608,14 +2616,6 @@ int gpiod_direction_input(struct gpio_desc *desc)
 }
 EXPORT_SYMBOL_GPL(gpiod_direction_input);
 
-static int gpio_set_drive_single_ended(struct gpio_chip *gc, unsigned offset,
-                                      enum pin_config_param mode)
-{
-       unsigned long config = { PIN_CONF_PACKED(mode, 0) };
-
-       return gc->set_config ? gc->set_config(gc, offset, config) : -ENOTSUPP;
-}
-
 static int gpiod_direction_output_raw_commit(struct gpio_desc *desc, int value)
 {
        struct gpio_chip *gc = desc->gdev->chip;
@@ -2712,8 +2712,8 @@ int gpiod_direction_output(struct gpio_desc *desc, int 
value)
        gc = desc->gdev->chip;
        if (test_bit(FLAG_OPEN_DRAIN, &desc->flags)) {
                /* First see if we can enable open drain in hardware */
-               ret = gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc),
-                                                 PIN_CONFIG_DRIVE_OPEN_DRAIN);
+               ret = gpio_set_config(gc, gpio_chip_hwgpio(desc),
+                                     PIN_CONFIG_DRIVE_OPEN_DRAIN);
                if (!ret)
                        goto set_output_value;
                /* Emulate open drain by not actively driving the line high */
@@ -2721,16 +2721,16 @@ int gpiod_direction_output(struct gpio_desc *desc, int 
value)
                        return gpiod_direction_input(desc);
        }
        else if (test_bit(FLAG_OPEN_SOURCE, &desc->flags)) {
-               ret = gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc),
-                                                 PIN_CONFIG_DRIVE_OPEN_SOURCE);
+               ret = gpio_set_config(gc, gpio_chip_hwgpio(desc),
+                                     PIN_CONFIG_DRIVE_OPEN_SOURCE);
                if (!ret)
                        goto set_output_value;
                /* Emulate open source by not actively driving the line low */
                if (!value)
                        return gpiod_direction_input(desc);
        } else {
-               gpio_set_drive_single_ended(gc, gpio_chip_hwgpio(desc),
-                                           PIN_CONFIG_DRIVE_PUSH_PULL);
+               gpio_set_config(gc, gpio_chip_hwgpio(desc),
+                               PIN_CONFIG_DRIVE_PUSH_PULL);
        }
 
 set_output_value:
-- 
2.20.1

Reply via email to