On Tue, Feb 05, 2019 at 08:33:29PM -0500, Brian Masney wrote:
> This patch adds device device tree bindings for the vibrator found on
> the LG Nexus 5 (hammerhead) phone.
>
> Signed-off-by: Brian Masney <[email protected]>
This should go through Qualcomm tree with the other bindings?
> ---
> Changes since v3:
> - None
>
> .../qcom-msm8974-lge-nexus5-hammerhead.dts | 31 +++++++++++++++++++
> 1 file changed, 31 insertions(+)
>
> diff --git a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> index b3b04736a159..1fd9f429f34a 100644
> --- a/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> +++ b/arch/arm/boot/dts/qcom-msm8974-lge-nexus5-hammerhead.dts
> @@ -5,6 +5,7 @@
> #include <dt-bindings/gpio/gpio.h>
> #include <dt-bindings/input/input.h>
> #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
> +#include <dt-bindings/clock/qcom,mmcc-msm8974.h>
>
> / {
> model = "LGE MSM 8974 HAMMERHEAD";
> @@ -306,6 +307,36 @@
> input-enable;
> };
> };
> +
> + vibrator_pin: vibrator {
> + pwm {
> + pins = "gpio27";
> + function = "gp1_clk";
> +
> + drive-strength = <6>;
> + bias-disable;
> + };
> +
> + enable {
> + pins = "gpio60";
> + function = "gpio";
> + };
> + };
> + };
> +
> + vibrator@fd8c3450 {
> + compatible = "qcom,msm8974-vibrator";
> + reg = <0xfd8c3450 0x400>;
> +
> + vcc-supply = <&pm8941_l19>;
> +
> + clocks = <&mmcc CAMSS_GP1_CLK>;
> + clock-names = "pwm";
> +
> + enable-gpios = <&msmgpio 60 GPIO_ACTIVE_HIGH>;
> +
> + pinctrl-names = "default";
> + pinctrl-0 = <&vibrator_pin>;
> };
>
> sdhci@f9824900 {
> --
> 2.17.2
>
--
Dmitry
