Am Donnerstag, den 24.01.2019, 19:55 -0700 schrieb Angus Ainslie (Purism): > Add the sdma nodes to the base devicetree for the imx8mq > > Signed-off-by: Angus Ainslie (Purism) <[email protected]>
One nit below, with that fixed: Reviewed-by: Lucas Stach <[email protected]> You might need to split this patch out from the series and send it to Shawn separately after the dmaengine changes have been accepted. regards, Lucas > --- > arch/arm64/boot/dts/freescale/imx8mq.dtsi | 28 +++++++++++++++++++++++ > 1 file changed, 28 insertions(+) > > diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi > b/arch/arm64/boot/dts/freescale/imx8mq.dtsi > index c0402375e7c1..f0cd3675ead0 100644 > --- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi > +++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi > @@ -336,6 +336,17 @@ > > clocks = <&clk IMX8MQ_CLK_WDOG3_ROOT>; > > status = "disabled"; > > }; > + > > > + sdma2: sdma@302c0000 { > > + compatible = "fsl,imx8mq-sdma", > > "fsl,imx7d-sdma"; > > + reg = <0x302c0000 0x10000>; > > + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX8MQ_CLK_SDMA2_ROOT>, > + <&clk IMX8MQ_CLK_SDMA2_ROOT>; Some spaces to align the second clock reference as in the rest of this file, please. > + clock-names = "ipg", "ahb"; > > + #dma-cells = <3>; > > + fsl,sdma-ram-script-name = > > "imx/sdma/sdma-imx7d.bin"; > > + }; > > }; > > > bus@30400000 { /* AIPS2 */ > @@ -370,6 +381,8 @@ > > clocks = <&clk IMX8MQ_CLK_UART3_ROOT>, > > <&clk IMX8MQ_CLK_UART3_ROOT>; > > clock-names = "ipg", "per"; > > + dmas = <&sdma1 26 4 0>, <&sdma1 27 4 0>; > > + dma-names = "rx", "tx"; > > status = "disabled"; > > }; > > @@ -381,6 +394,8 @@ > > clocks = <&clk IMX8MQ_CLK_UART2_ROOT>, > > <&clk IMX8MQ_CLK_UART2_ROOT>; > > clock-names = "ipg", "per"; > > + dmas = <&sdma1 24 4 0>, <&sdma1 25 4 0>; > > + dma-names = "rx", "tx"; > > status = "disabled"; > > }; > > @@ -432,6 +447,8 @@ > > clocks = <&clk IMX8MQ_CLK_UART4_ROOT>, > > <&clk IMX8MQ_CLK_UART4_ROOT>; > > clock-names = "ipg", "per"; > > + dmas = <&sdma1 28 4 0>, <&sdma1 29 4 0>; > > + dma-names = "rx", "tx"; > > status = "disabled"; > > }; > > @@ -465,6 +482,17 @@ > > status = "disabled"; > > }; > > > > + sdma1: sdma@30bd0000 { > > + compatible = "fsl,imx8mq-sdma", > > "fsl,imx7d-sdma"; > > + reg = <0x30bd0000 0x10000>; > > + interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; > > + clocks = <&clk IMX8MQ_CLK_SDMA1_ROOT>, > > + <&clk IMX8MQ_CLK_AHB>; > > + clock-names = "ipg", "ahb"; > > + #dma-cells = <3>; > > + fsl,sdma-ram-script-name = > > "imx/sdma/sdma-imx7d.bin"; > > + }; > + > > > fec1: ethernet@30be0000 { > > compatible = "fsl,imx8mq-fec", "fsl,imx6sx-fec"; > > reg = <0x30be0000 0x10000>;
