periph and hiu bus addresses/size are wrong.
cbus, aobus and apb just don't exist in the memory map so remove them.
Fixes: 9c8c52f7cb4f ("arm64: dts: meson-g12a: add initial g12a s905d2 SoC DT
support")
Signed-off-by: Jerome Brunet <[email protected]>
---
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 70 +++++++--------------
1 file changed, 24 insertions(+), 46 deletions(-)
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
index 3b82a975c663..2aea5ba62fee 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-g12a.dtsi
@@ -78,46 +78,40 @@
#size-cells = <2>;
ranges;
- periphs: periphs@ff634000 {
+ periphs: bus@ff634400 {
compatible = "simple-bus";
- reg = <0x0 0xff634000 0x0 0x2000>;
+ reg = <0x0 0xff634400 0x0 0x400>;
#address-cells = <2>;
#size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff634000 0x0 0x2000>;
+ ranges = <0x0 0x0 0x0 0xff634400 0x0 0x400>;
};
- hiubus: bus@ff63c000 {
+ hiu: bus@ff63c000 {
compatible = "simple-bus";
- reg = <0x0 0xff63c000 0x0 0x1c00>;
+ reg = <0x0 0xff63c000 0x0 0x1400>;
#address-cells = <2>;
#size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1c00>;
+ ranges = <0x0 0x0 0x0 0xff63c000 0x0 0x1400>;
};
- aobus: bus@ff800000 {
- compatible = "simple-bus";
- reg = <0x0 0xff800000 0x0 0x100000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xff800000 0x0 0x100000>;
-
- uart_AO: serial@3000 {
- compatible = "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
- reg = <0x0 0x3000 0x0 0x18>;
- interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&xtal>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- status = "disabled";
- };
-
- uart_AO_B: serial@4000 {
- compatible = "amlogic,meson-gx-uart",
"amlogic,meson-ao-uart";
- reg = <0x0 0x4000 0x0 0x18>;
- interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
- clocks = <&xtal>, <&xtal>, <&xtal>;
- clock-names = "xtal", "pclk", "baud";
- status = "disabled";
- };
+ uart_AO: serial@ff803000 {
+ compatible = "amlogic,meson-gx-uart",
+ "amlogic,meson-ao-uart";
+ reg = <0x0 0xff803000 0x0 0x18>;
+ interrupts = <GIC_SPI 193 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&xtal>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
+ };
+
+ uart_AO_B: serial@ff804000 {
+ compatible = "amlogic,meson-gx-uart",
+ "amlogic,meson-ao-uart";
+ reg = <0x0 0xff804000 0x0 0x18>;
+ interrupts = <GIC_SPI 197 IRQ_TYPE_EDGE_RISING>;
+ clocks = <&xtal>, <&xtal>, <&xtal>;
+ clock-names = "xtal", "pclk", "baud";
+ status = "disabled";
};
gic: interrupt-controller@ffc01000 {
@@ -132,22 +126,6 @@
#interrupt-cells = <3>;
#address-cells = <0>;
};
-
- cbus: bus@ffd00000 {
- compatible = "simple-bus";
- reg = <0x0 0xffd00000 0x0 0x25000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xffd00000 0x0 0x25000>;
- };
-
- apb: apb@ffe00000 {
- compatible = "simple-bus";
- reg = <0x0 0xffe00000 0x0 0x200000>;
- #address-cells = <2>;
- #size-cells = <2>;
- ranges = <0x0 0x0 0x0 0xffe00000 0x0 0x200000>;
- };
};
timer {
--
2.20.1
