Move #clock-cells into the child node for instances of the qcom-qmp-phy nodes, and set it to zero, in accordance with the proper bindings. PHYs that don't provide clocks don't have #clock-cells, and so are left alone.
Signed-off-by: Evan Green <[email protected]> Reviewed-by: Stephen Boyd <[email protected]> --- Changes in v2: None arch/arm64/boot/dts/qcom/sdm845.dtsi | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm64/boot/dts/qcom/sdm845.dtsi b/arch/arm64/boot/dts/qcom/sdm845.dtsi index 47bb7edc03afe..fedd6578776a2 100644 --- a/arch/arm64/boot/dts/qcom/sdm845.dtsi +++ b/arch/arm64/boot/dts/qcom/sdm845.dtsi @@ -1170,7 +1170,6 @@ <0x88e8000 0x10>; reg-names = "reg-base", "dp_com"; status = "disabled"; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1192,6 +1191,7 @@ <0x88e9600 0x128>, <0x88e9800 0x200>, <0x88e9a00 0x100>; + #clock-cells = <0>; #phy-cells = <0>; clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>; clock-names = "pipe0"; @@ -1203,7 +1203,6 @@ compatible = "qcom,sdm845-qmp-usb3-uni-phy"; reg = <0x88eb000 0x18c>; status = "disabled"; - #clock-cells = <1>; #address-cells = <1>; #size-cells = <1>; ranges; @@ -1223,6 +1222,7 @@ <0x88eb400 0x1fc>, <0x88eb800 0x218>, <0x88e9600 0x70>; + #clock-cells = <0>; #phy-cells = <0>; clocks = <&gcc GCC_USB3_SEC_PHY_PIPE_CLK>; clock-names = "pipe0"; -- 2.18.1
