Quoting Aisheng DONG (2018-12-03 17:29:29) > > -----Original Message----- > > From: Stephen Boyd [mailto:[email protected]] > > Sent: Tuesday, December 4, 2018 3:32 AM > > To: Aisheng DONG <[email protected]>; [email protected] > > Cc: [email protected]; [email protected]; > > [email protected]; [email protected]; Anson Huang > > <[email protected]>; Jacky Bai <[email protected]>; dl-linux-imx > > <[email protected]>; Aisheng DONG <[email protected]> > > Subject: Re: [PATCH V6 0/9] clk: add imx7ulp clk support > > > > Quoting A.s. Dong (2018-11-14 05:01:31) > > > This patch series intends to add imx7ulp clk support. > > > > > > i.MX7ULP Clock functions are under joint control of the System Clock > > > Generation (SCG) modules, Peripheral Clock Control (PCC) modules, and > > > Core Mode Controller (CMC)1 blocks > > > > > > The clocking scheme provides clear separation between M4 domain and A7 > > > domain. Except for a few clock sources shared between two domains, > > > such as the System Oscillator clock, the Slow IRC (SIRC), and and the > > > Fast IRC clock (FIRCLK), clock sources and clock management are > > > separated and contained within each domain. > > > > > > M4 clock management consists of SCG0, PCC0, PCC1, and CMC0 modules. > > > A7 clock management consists of SCG1, PCC2, PCC3, and CMC1 modules. > > > > > > Note: this series only adds A7 clock domain support as M4 clock domain > > > will be handled by M4 seperately. > > > > > > > I got: > > > > drivers/clk/imx/clk-pllv4.c:152:15: warning: symbol 'imx_clk_pllv4' was not > > declared. Should it be static? > > drivers/clk/imx/clk-pfdv2.c:166:15: warning: symbol 'imx_clk_pfdv2' was not > > declared. Should it be static? > > drivers/clk/imx/clk-divider-gate.c:174:15: warning: symbol > > 'imx_clk_divider_gate' was not declared. Should it be static? > > drivers/clk/imx/clk-composite-7ulp.c:22:15: warning: symbol > > 'imx7ulp_clk_composite' was not declared. Should it be static? > > > > which I can fix easily by throwing in clk.h into each file. > > Thanks, I will double check it when I back to office. >
No worries, I fixed it up and merged to clk-next.
