Hi, Stephen Best Regards! Anson Huang
> -----Original Message----- > From: Stephen Boyd [mailto:[email protected]] > Sent: 2018年11月30日 15:25 > To: [email protected]; [email protected]; > [email protected]; [email protected]; > [email protected]; [email protected]; [email protected]; > Anson Huang <[email protected]>; Fabio Estevam > <[email protected]> > Cc: dl-linux-imx <[email protected]> > Subject: Re: [PATCH] clk: imx6sl: ensure MMDC CH0 handshake is bypassed > > Quoting Anson Huang (2018-11-29 23:23:47) > > Same as other i.MX6 SoCs, ensure unused MMDC channel's handshake is > > bypassed, this is to make sure no request signal will be generated > > when periphe_clk_sel is changed or SRC warm reset is triggered. > > > > Signed-off-by: Anson Huang <[email protected]> > > Does this need a fixes tag? Normally this bit is 1b'1 by reset, but during our development, it used to be overwritten in u-boot and lead to some clock operation fail in Linux kernel, that is why we ensure it in clock driver early phase. IMO, it should be OK to not add a fix tag, since it is just to make sure the setting is correct and NOT depends on the hardware reset value which could be changed in u-boot. Anson.
