Hi Alex,
On Mon, Oct 22, 2018 at 7:34 AM Alex Gonzalez <[email protected]> wrote:
> + g101evn010: display@0 {
> + bits-per-pixel = <16>;
> + bus-width = <18>;
> +
> + display-timings {
> + native-mode = <&timing0>;
> + timing0: timing0 {
> + clock-frequency = <68930000>;
> + hactive = <1280>;
> + vactive = <800>;
> + hfront-porch = <120>;
> + hback-porch = <0>;
> + hsync-len = <8>;
> + vback-porch = <10>;
> + vfront-porch = <0>;
> + vsync-len = <6>;
> + hsync-active = <1>;
> + vsync-active = <1>;
> + de-active = <1>;
> + pixelclk-active = <0>;
The recommendation is not to put the panel timings in the dts file anymore.
You could add an entry for this panel into the simple-panel driver and
then reference its compatible string in the board dts.
