Ping for comments Thanks, Jolly Shah
> -----Original Message----- > From: Jolly Shah [mailto:[email protected]] > Sent: Thursday, October 04, 2018 2:24 PM > To: [email protected]; [email protected]; [email protected]; > [email protected]; [email protected]; > [email protected]; [email protected]; Michal Simek > <[email protected]>; [email protected]; [email protected] > Cc: Rajan Vaja <[email protected]>; [email protected]; linux-arm- > [email protected]; [email protected]; Jolly Shah > <[email protected]> > Subject: [PATCH v3 0/4] drivers: soc: xilinx: Add support for ZynqMP power > domain driver > > The zynqmp power domain driver communicates the usage requirements for > logical power domains / devices to the platform FW. > FW is responsible for choosing appropriate power states, taking Linux' usage > information into account. > > This patch series is based on top of Xilinx firmware patch set: > https://patchwork.kernel.org/cover/10555405/ > > v3: > - Changed binding to have FW node as a power controller as suggested by Rob > - Updated FW driver to register it as mfd child devices from firmware probe > - Move bindings location as suggested > > v2: > - Rebased on top of latest firmware driver patch series > - Updated driver name from zynqmp-genpd to zynqmp-power-controller > - Updated device tree bindings to move power controller node under firmware > node > > Jolly Shah (1): > drivers: soc: xilinx: Add ZynqMP power domain driver > > Rajan Vaja (3): > dt-bindings: power: Add ZynqMP power domain bindings > firmware: xilinx: Add APIs to control node status/power > firmware: xilinx: Add node IDs for zynqmp firmware > > .../bindings/power/xlnx,zynqmp-genpd.txt | 34 ++ > drivers/firmware/xilinx/Kconfig | 1 + > drivers/firmware/xilinx/zynqmp.c | 73 ++++ > drivers/soc/xilinx/Kconfig | 9 + > drivers/soc/xilinx/Makefile | 2 + > drivers/soc/xilinx/zynqmp_pm_domains.c | 403 > +++++++++++++++++++++ > include/dt-bindings/power/xlnx-zynqmp-power.h | 39 ++ > include/linux/firmware/xlnx-zynqmp.h | 98 +++++ > 8 files changed, 659 insertions(+) > create mode 100644 Documentation/devicetree/bindings/power/xlnx,zynqmp- > genpd.txt > create mode 100644 drivers/soc/xilinx/zynqmp_pm_domains.c > create mode 100644 include/dt-bindings/power/xlnx-zynqmp-power.h > > -- > 2.7.4
